Commit b686929c authored by Sujith Manoharan's avatar Sujith Manoharan Committed by John W. Linville
Browse files

ath9k_hw: Enable calibration types in init_cal_settings



Doing this in ath9k_hw_fill_cap_info() is odd and it's
cleaner to do this in the init function for calibration.
Also, setup the supported calibration type in init_cal_settings.
Signed-off-by: default avatarSujith Manoharan <c_manoha@qca.qualcomm.com>
Signed-off-by: default avatarJohn W. Linville <linville@tuxdriver.com>
parent 54428c57
......@@ -323,6 +323,14 @@ static const struct ath9k_percal_data iq_cal_single_sample = {
static void ar9003_hw_init_cal_settings(struct ath_hw *ah)
{
ah->iq_caldata.calData = &iq_cal_single_sample;
if (AR_SREV_9300_20_OR_LATER(ah)) {
ah->enabled_cals |= TX_IQ_CAL;
if (AR_SREV_9485_OR_LATER(ah))
ah->enabled_cals |= TX_IQ_ON_AGC_CAL;
}
ah->supp_cals = IQ_MISMATCH_CAL;
}
/*
......@@ -1131,13 +1139,10 @@ skip_tx_iqcal:
/* Initialize list pointers */
ah->cal_list = ah->cal_list_last = ah->cal_list_curr = NULL;
ah->supp_cals = IQ_MISMATCH_CAL;
if (ah->supp_cals & IQ_MISMATCH_CAL) {
INIT_CAL(&ah->iq_caldata);
INSERT_CAL(ah, &ah->iq_caldata);
ath_dbg(common, CALIBRATE, "enabling IQ Calibration\n");
}
INIT_CAL(&ah->iq_caldata);
INSERT_CAL(ah, &ah->iq_caldata);
ath_dbg(common, CALIBRATE, "enabling IQ Calibration\n");
if (ah->supp_cals & TEMP_COMP_CAL) {
INIT_CAL(&ah->tempCompCalData);
......
......@@ -2568,12 +2568,6 @@ int ath9k_hw_fill_cap_info(struct ath_hw *ah)
rx_chainmask >>= 1;
}
if (AR_SREV_9300_20_OR_LATER(ah)) {
ah->enabled_cals |= TX_IQ_CAL;
if (AR_SREV_9485_OR_LATER(ah))
ah->enabled_cals |= TX_IQ_ON_AGC_CAL;
}
if (AR_SREV_9462(ah) || AR_SREV_9565(ah)) {
if (!(ah->ent_mode & AR_ENT_OTP_49GHZ_DISABLE))
pCap->hw_caps |= ATH9K_HW_CAP_MCI;
......@@ -2582,7 +2576,6 @@ int ath9k_hw_fill_cap_info(struct ath_hw *ah)
pCap->hw_caps |= ATH9K_HW_CAP_RTT;
}
if (AR_SREV_9280_20_OR_LATER(ah)) {
pCap->hw_caps |= ATH9K_HW_WOW_DEVICE_CAPABLE |
ATH9K_HW_WOW_PATTERN_MATCH_EXACT;
......
Markdown is supported
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment