Commit b1c4a9dd authored by Haiying Wang's avatar Haiying Wang Committed by David S. Miller

ucc_geth: Change uec phy id to the same format as gianfar's

The commit b31a1d8b ("gianfar: Convert
gianfar to an of_platform_driver") changes the gianfar's phy id to the
format like "mdio@xxxx:xx", but uec still uses the old format like
"xxxxxxxx:xx".  For the board whose UEC uses gianfar-mdio like
MPC8568MDS, the phy can not be attached because of the incompatible
phy id format. This patch changes uec's phy id to the same format as
gianfar's.
Signed-off-by: default avatarHaiying Wang <Haiying.Wang@freescale.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parent 1af7ad51
......@@ -1536,6 +1536,11 @@ static void adjust_link(struct net_device *dev)
static int init_phy(struct net_device *dev)
{
struct ucc_geth_private *priv = netdev_priv(dev);
struct device_node *np = priv->node;
struct device_node *phy, *mdio;
const phandle *ph;
char bus_name[MII_BUS_ID_SIZE];
const unsigned int *id;
struct phy_device *phydev;
char phy_id[BUS_ID_SIZE];
......@@ -1543,8 +1548,18 @@ static int init_phy(struct net_device *dev)
priv->oldspeed = 0;
priv->oldduplex = -1;
snprintf(phy_id, sizeof(phy_id), PHY_ID_FMT, priv->ug_info->mdio_bus,
priv->ug_info->phy_address);
ph = of_get_property(np, "phy-handle", NULL);
phy = of_find_node_by_phandle(*ph);
mdio = of_get_parent(phy);
id = of_get_property(phy, "reg", NULL);
of_node_put(phy);
of_node_put(mdio);
uec_mdio_bus_name(bus_name, mdio);
snprintf(phy_id, sizeof(phy_id), "%s:%02x",
bus_name, *id);
phydev = phy_connect(dev, phy_id, &adjust_link, 0, priv->phy_interface);
......@@ -3748,6 +3763,7 @@ static int ucc_geth_probe(struct of_device* ofdev, const struct of_device_id *ma
ugeth->ug_info = ug_info;
ugeth->dev = dev;
ugeth->node = np;
return 0;
}
......
......@@ -1186,6 +1186,8 @@ struct ucc_geth_private {
int oldspeed;
int oldduplex;
int oldlink;
struct device_node *node;
};
void uec_set_ethtool_ops(struct net_device *netdev);
......
......@@ -156,7 +156,7 @@ static int uec_mdio_probe(struct of_device *ofdev, const struct of_device_id *ma
if (err)
goto reg_map_fail;
snprintf(new_bus->id, MII_BUS_ID_SIZE, "%x", res.start);
uec_mdio_bus_name(new_bus->id, np);
new_bus->irq = kmalloc(32 * sizeof(int), GFP_KERNEL);
......@@ -283,3 +283,13 @@ void uec_mdio_exit(void)
{
of_unregister_platform_driver(&uec_mdio_driver);
}
void uec_mdio_bus_name(char *name, struct device_node *np)
{
const u32 *reg;
reg = of_get_property(np, "reg", NULL);
snprintf(name, MII_BUS_ID_SIZE, "%s@%x", np->name, reg ? *reg : 0);
}
......@@ -97,4 +97,5 @@ int uec_mdio_read(struct mii_bus *bus, int mii_id, int regnum);
int uec_mdio_write(struct mii_bus *bus, int mii_id, int regnum, u16 value);
int __init uec_mdio_init(void);
void uec_mdio_exit(void);
void uec_mdio_bus_name(char *name, struct device_node *np);
#endif /* __UEC_MII_H */
Markdown is supported
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment