Commit b0a1ae97 authored by Oleksij Rempel's avatar Oleksij Rempel Committed by John W. Linville

ath9k: check for Rx-STBC flag and pass it to ieee80211

This patch make use of STBC flag in DMA RX descriptor.
Only devices after ar9280 can provide this information.

If card support it we will set HAVE_STBC flag, to show
clint programm thet STBC is supported but not received.
Signed-off-by: default avatarOleksij Rempel <linux@rempel-privat.de>
Signed-off-by: default avatarJohn W. Linville <linville@tuxdriver.com>
parent ab276103
......@@ -21,6 +21,7 @@
#include <linux/ath9k_platform.h>
#include <linux/module.h>
#include <linux/relay.h>
#include <net/ieee80211_radiotap.h>
#include "ath9k.h"
......@@ -766,8 +767,13 @@ void ath9k_set_hw_capab(struct ath_softc *sc, struct ieee80211_hw *hw)
IEEE80211_HW_REPORTS_TX_ACK_STATUS |
IEEE80211_HW_SUPPORTS_RC_TABLE;
if (sc->sc_ah->caps.hw_caps & ATH9K_HW_CAP_HT)
hw->flags |= IEEE80211_HW_AMPDU_AGGREGATION;
if (sc->sc_ah->caps.hw_caps & ATH9K_HW_CAP_HT) {
hw->flags |= IEEE80211_HW_AMPDU_AGGREGATION;
if (AR_SREV_9280_20_OR_LATER(ah))
hw->radiotap_mcs_details |=
IEEE80211_RADIOTAP_MCS_HAVE_STBC;
}
if (AR_SREV_9160_10_OR_LATER(sc->sc_ah) || ath9k_modparam_nohwcrypt)
hw->flags |= IEEE80211_HW_MFP_CAPABLE;
......
......@@ -593,6 +593,11 @@ int ath9k_hw_rxprocdesc(struct ath_hw *ah, struct ath_desc *ds,
(ads.ds_rxstatus3 & AR_GI) ? RX_FLAG_SHORT_GI : 0;
rs->flag |=
(ads.ds_rxstatus3 & AR_2040) ? RX_FLAG_40MHZ : 0;
if (AR_SREV_9280_20_OR_LATER(ah))
rs->flag |=
(ads.ds_rxstatus3 & AR_STBC) ?
/* we can only Nss=1 STBC */
(1 << RX_FLAG_STBC_SHIFT) : 0;
if (ads.ds_rxstatus8 & AR_PreDelimCRCErr)
rs->rs_flags |= ATH9K_RX_DELIM_CRC_PRE;
......
......@@ -534,7 +534,8 @@ struct ar5416_desc {
#define AR_2040 0x00000002
#define AR_Parallel40 0x00000004
#define AR_Parallel40_S 2
#define AR_RxStatusRsvd30 0x000000f8
#define AR_STBC 0x00000008 /* on ar9280 and later */
#define AR_RxStatusRsvd30 0x000000f0
#define AR_RxAntenna 0xffffff00
#define AR_RxAntenna_S 8
......
Markdown is supported
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment