Commit b07682b6 authored by Santosh Shilimkar's avatar Santosh Shilimkar Committed by Samuel Ortiz
Browse files

mfd: Rename twl4030* driver files to enable re-use



The upcoming TWL6030 is companion chip for OMAP4 like the current TWL4030
for OMAP3. The common modules like RTC, Regulator creates opportunity
to re-use the most of the code from twl4030.

This patch renames few common drivers twl4030* files to twl* to enable
the code re-use.
Signed-off-by: default avatarRajendra Nayak <rnayak@ti.com>
Signed-off-by: default avatarBalaji T K <balajitk@ti.com>
Signed-off-by: default avatarSantosh Shilimkar <santosh.shilimkar@ti.com>
Acked-by: default avatarKevin Hilman <khilman@deeprootsystems.com>
Signed-off-by: default avatarSamuel Ortiz <sameo@linux.intel.com>
parent 147e0847
......@@ -19,7 +19,7 @@
#include <linux/mtd/mtd.h>
#include <linux/mtd/partitions.h>
#include <linux/delay.h>
#include <linux/i2c/twl4030.h>
#include <linux/i2c/twl.h>
#include <linux/err.h>
#include <linux/clk.h>
#include <linux/io.h>
......
......@@ -20,7 +20,7 @@
#include <linux/input/matrix_keypad.h>
#include <linux/spi/spi.h>
#include <linux/spi/ads7846.h>
#include <linux/i2c/twl4030.h>
#include <linux/i2c/twl.h>
#include <linux/regulator/machine.h>
#include <linux/io.h>
#include <linux/gpio.h>
......
......@@ -24,7 +24,7 @@
#include <linux/spi/spi.h>
#include <linux/spi/ads7846.h>
#include <linux/regulator/machine.h>
#include <linux/i2c/twl4030.h>
#include <linux/i2c/twl.h>
#include <linux/io.h>
#include <linux/smsc911x.h>
......
......@@ -29,7 +29,7 @@
#include <linux/mtd/nand.h>
#include <linux/regulator/machine.h>
#include <linux/i2c/twl4030.h>
#include <linux/i2c/twl.h>
#include <mach/hardware.h>
#include <asm/mach-types.h>
......
......@@ -24,7 +24,7 @@
#include <linux/spi/spi.h>
#include <linux/spi/ads7846.h>
#include <linux/regulator/machine.h>
#include <linux/i2c/twl4030.h>
#include <linux/i2c/twl.h>
#include <linux/leds.h>
#include <linux/input.h>
#include <linux/input/matrix_keypad.h>
......
......@@ -26,7 +26,7 @@
#include <linux/io.h>
#include <linux/kernel.h>
#include <linux/platform_device.h>
#include <linux/i2c/twl4030.h>
#include <linux/i2c/twl.h>
#include <linux/regulator/machine.h>
#include <linux/mtd/mtd.h>
......
......@@ -34,7 +34,7 @@
#include <linux/platform_device.h>
#include <linux/slab.h>
#include <linux/i2c/twl4030.h>
#include <linux/i2c/twl.h>
/*
......
......@@ -31,7 +31,7 @@
#include <linux/interrupt.h>
#include <linux/input.h>
#include <linux/platform_device.h>
#include <linux/i2c/twl4030.h>
#include <linux/i2c/twl.h>
/*
......
......@@ -27,7 +27,7 @@
#include <linux/input.h>
#include <linux/interrupt.h>
#include <linux/platform_device.h>
#include <linux/i2c/twl4030.h>
#include <linux/i2c/twl.h>
#define PWR_PWRON_IRQ (1 << 0)
......
......@@ -26,7 +26,7 @@ obj-$(CONFIG_MFD_WM8350_I2C) += wm8350-i2c.o
obj-$(CONFIG_TPS65010) += tps65010.o
obj-$(CONFIG_MENELAUS) += menelaus.o
obj-$(CONFIG_TWL4030_CORE) += twl4030-core.o twl4030-irq.o
obj-$(CONFIG_TWL4030_CORE) += twl-core.o twl4030-irq.o
obj-$(CONFIG_TWL4030_POWER) += twl4030-power.o
obj-$(CONFIG_TWL4030_CODEC) += twl4030-codec.o
......
......@@ -36,7 +36,7 @@
#include <linux/regulator/machine.h>
#include <linux/i2c.h>
#include <linux/i2c/twl4030.h>
#include <linux/i2c/twl.h>
#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
#include <plat/cpu.h>
......
......@@ -32,7 +32,7 @@
#include <linux/irq.h>
#include <linux/kthread.h>
#include <linux/i2c/twl4030.h>
#include <linux/i2c/twl.h>
/*
......
......@@ -26,7 +26,7 @@
#include <linux/module.h>
#include <linux/pm.h>
#include <linux/i2c/twl4030.h>
#include <linux/i2c/twl.h>
#include <linux/platform_device.h>
#include <asm/mach-types.h>
......
......@@ -11,7 +11,7 @@ obj-$(CONFIG_REGULATOR_USERSPACE_CONSUMER) += userspace-consumer.o
obj-$(CONFIG_REGULATOR_BQ24022) += bq24022.o
obj-$(CONFIG_REGULATOR_LP3971) += lp3971.o
obj-$(CONFIG_REGULATOR_MAX1586) += max1586.o
obj-$(CONFIG_REGULATOR_TWL4030) += twl4030-regulator.o
obj-$(CONFIG_REGULATOR_TWL4030) += twl-regulator.o
obj-$(CONFIG_REGULATOR_WM831X) += wm831x-dcdc.o
obj-$(CONFIG_REGULATOR_WM831X) += wm831x-isink.o
obj-$(CONFIG_REGULATOR_WM831X) += wm831x-ldo.o
......
......@@ -15,7 +15,7 @@
#include <linux/platform_device.h>
#include <linux/regulator/driver.h>
#include <linux/regulator/machine.h>
#include <linux/i2c/twl4030.h>
#include <linux/i2c/twl.h>
/*
......
......@@ -80,7 +80,7 @@ obj-$(CONFIG_RTC_DRV_STK17TA8) += rtc-stk17ta8.o
obj-$(CONFIG_RTC_DRV_STMP) += rtc-stmp3xxx.o
obj-$(CONFIG_RTC_DRV_SUN4V) += rtc-sun4v.o
obj-$(CONFIG_RTC_DRV_TEST) += rtc-test.o
obj-$(CONFIG_RTC_DRV_TWL4030) += rtc-twl4030.o
obj-$(CONFIG_RTC_DRV_TWL4030) += rtc-twl.o
obj-$(CONFIG_RTC_DRV_TX4939) += rtc-tx4939.o
obj-$(CONFIG_RTC_DRV_V3020) += rtc-v3020.o
obj-$(CONFIG_RTC_DRV_VR41XX) += rtc-vr41xx.o
......
......@@ -28,7 +28,7 @@
#include <linux/platform_device.h>
#include <linux/interrupt.h>
#include <linux/i2c/twl4030.h>
#include <linux/i2c/twl.h>
/*
......
......@@ -33,7 +33,7 @@
#include <linux/io.h>
#include <linux/delay.h>
#include <linux/usb/otg.h>
#include <linux/i2c/twl4030.h>
#include <linux/i2c/twl.h>
#include <linux/regulator/consumer.h>
#include <linux/err.h>
......
......@@ -25,7 +25,7 @@
#include <linux/platform_device.h>
#include <linux/delay.h>
#include <linux/gpio.h>
#include <linux/i2c/twl4030.h>
#include <linux/i2c/twl.h>
#include <plat/mux.h>
#include <asm/mach-types.h>
......
......@@ -26,7 +26,7 @@
#include <linux/platform_device.h>
#include <linux/miscdevice.h>
#include <linux/uaccess.h>
#include <linux/i2c/twl4030.h>
#include <linux/i2c/twl.h>
#define TWL4030_WATCHDOG_CFG_REG_OFFS 0x3
......
Markdown is supported
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment