Commit afa08974 authored by Jean Delvare's avatar Jean Delvare
Browse files

i2c: Add an interface to lock/unlock an I2C bus segment

Some drivers need to be able to prevent access to an I2C bus segment
for a specific period of time. Add an interface for them to do so
without twiddling with i2c-core internals.
Signed-off-by: default avatarJean Delvare <>
Acked-by: default avatarBen Hutchings <>
parent 3806e94b
......@@ -188,7 +188,7 @@ static int sfn4111t_reset(struct efx_nic *efx)
efx_oword_t reg;
/* GPIO 3 and the GPIO register are shared with I2C, so block that */
/* Pull RST_N (GPIO 2) low then let it up again, setting the
* FLASH_CFG_1 strap (GPIO 3) appropriately. Only change the
......@@ -204,7 +204,7 @@ static int sfn4111t_reset(struct efx_nic *efx)
falcon_write(efx, &reg, GPIO_CTL_REG_KER);
return 0;
......@@ -361,6 +361,24 @@ static inline void i2c_set_adapdata(struct i2c_adapter *dev, void *data)
dev_set_drvdata(&dev->dev, data);
* i2c_lock_adapter - Prevent access to an I2C bus segment
* @adapter: Target I2C bus segment
static inline void i2c_lock_adapter(struct i2c_adapter *adapter)
* i2c_unlock_adapter - Reauthorize access to an I2C bus segment
* @adapter: Target I2C bus segment
static inline void i2c_unlock_adapter(struct i2c_adapter *adapter)
/*flags for the client struct: */
#define I2C_CLIENT_PEC 0x04 /* Use Packet Error Checking */
#define I2C_CLIENT_TEN 0x10 /* we have a ten bit chip address */
Markdown is supported
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment