Commit af72261f authored by Xing Zheng's avatar Xing Zheng Committed by David S. Miller
Browse files

net: ethernet: arc: Add support emac for RK3036



The RK3036's GRFs offset are different with RK3066/RK3188, and need to set
mac TX/RX clock before probe emac.
Signed-off-by: default avatarXing Zheng <zhengxing@rock-chips.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parent f4c9d3ee
......@@ -34,9 +34,9 @@ config EMAC_ROCKCHIP
select ARC_EMAC_CORE
depends on OF_IRQ && OF_NET && REGULATOR && HAS_DMA
---help---
Support for Rockchip RK3066/RK3188 EMAC ethernet controllers.
Support for Rockchip RK3036/RK3066/RK3188 EMAC ethernet controllers.
This selects Rockchip SoC glue layer support for the
emac device driver. This driver is used for RK3066/RK3188
emac device driver. This driver is used for RK3036/RK3066/RK3188
EMAC ethernet controller.
endif # NET_VENDOR_ARC
......@@ -67,6 +67,11 @@ static void emac_rockchip_set_mac_speed(void *priv, unsigned int speed)
pr_err("unable to apply speed %u to grf (%d)\n", speed, err);
}
static const struct emac_rockchip_soc_data emac_rk3036_emac_data = {
.grf_offset = 0x140, .grf_mode_offset = 8,
.grf_speed_offset = 9, .need_div_macclk = 1,
};
static const struct emac_rockchip_soc_data emac_rk3066_emac_data = {
.grf_offset = 0x154, .grf_mode_offset = 0,
.grf_speed_offset = 1, .need_div_macclk = 0,
......@@ -78,6 +83,7 @@ static const struct emac_rockchip_soc_data emac_rk3188_emac_data = {
};
static const struct of_device_id emac_rockchip_dt_ids[] = {
{ .compatible = "rockchip,rk3036-emac", .data = &emac_rk3036_emac_data },
{ .compatible = "rockchip,rk3066-emac", .data = &emac_rk3066_emac_data },
{ .compatible = "rockchip,rk3188-emac", .data = &emac_rk3188_emac_data },
{ /* Sentinel */ }
......@@ -110,7 +116,7 @@ static int emac_rockchip_probe(struct platform_device *pdev)
interface = of_get_phy_mode(dev->of_node);
/* RK3066 and RK3188 SoCs only support RMII */
/* RK3036/RK3066/RK3188 SoCs only support RMII */
if (interface != PHY_INTERFACE_MODE_RMII) {
dev_err(dev, "unsupported phy interface mode %d\n", interface);
err = -ENOTSUPP;
......
Markdown is supported
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment