Commit ae21888f authored by Florian Fainelli's avatar Florian Fainelli Committed by David S. Miller
Browse files

Documentation: devicetree: net: refer to fixed-link.txt

Update the Freescale TSEC PHY, Broadcom GENET & SYSTEMPORT Device Tree
binding documentation to refer to the fixed-link Device Tree binding in
Reviewed-by: default avatarThomas Petazzoni <>
Signed-off-by: default avatarFlorian Fainelli <>
Signed-off-by: default avatarDavid S. Miller <>
parent 91c1d980
......@@ -24,7 +24,7 @@ Optional properties:
- fixed-link: When the GENET interface is connected to a MoCA hardware block or
when operating in a RGMII to RGMII type of connection, or when the MDIO bus is
voluntarily disabled, this property should be used to describe the "fixed link".
See Documentation/devicetree/bindings/net/fsl-tsec-phy.txt for information on
See Documentation/devicetree/bindings/net/fixed-link.txt for information on
the property specifics
Required child nodes:
......@@ -8,7 +8,7 @@ Required properties:
- local-mac-address: Ethernet MAC address (48 bits) of this adapter
- phy-mode: Should be a string describing the PHY interface to the
Ethernet switch/PHY, see Documentation/devicetree/bindings/net/ethernet.txt
- fixed-link: see Documentation/devicetree/bindings/net/fsl-tsec-phy.txt for
- fixed-link: see Documentation/devicetree/bindings/net/fixed-link.txt for
the property specific details
Optional properties:
......@@ -42,10 +42,7 @@ Properties:
interrupt. For TSEC and eTSEC devices, the first interrupt is
transmit, the second is receive, and the third is error.
- phy-handle : See ethernet.txt file in the same directory.
- fixed-link : <a b c d e> where a is emulated phy id - choose any,
but unique to the all specified fixed-links, b is duplex - 0 half,
1 full, c is link speed - d#10/d#100/d#1000, d is pause - 0 no
pause, 1 pause, e is asym_pause - 0 no asym_pause, 1 asym_pause.
- fixed-link : See fixed-link.txt in the same directory.
- phy-connection-type : See ethernet.txt file in the same directory.
This property is only really needed if the connection is of type
"rgmii-id", as all other connection types are detected by hardware.
Markdown is supported
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment