Commit adca4730 authored by Chris Wilson's avatar Chris Wilson Committed by Daniel Vetter
Browse files

drm/i915: All members of gen4 have hotplug, so unconditionally enable its irq



Also as we set the HOTPLUG_EN to 0 during pre-install, we can simply set
it during post-install, and nor do we wish to enable unwanted hotplug
events.

Signed-off-by: default avatarChris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: default avatarDaniel Vetter <daniel.vetter@ffwll.ch>
parent f15b4ca2
......@@ -2320,10 +2320,8 @@ static void i965_irq_preinstall(struct drm_device * dev)
atomic_set(&dev_priv->irq_received, 0);
if (I915_HAS_HOTPLUG(dev)) {
I915_WRITE(PORT_HOTPLUG_EN, 0);
I915_WRITE(PORT_HOTPLUG_STAT, I915_READ(PORT_HOTPLUG_STAT));
}
I915_WRITE(PORT_HOTPLUG_EN, 0);
I915_WRITE(PORT_HOTPLUG_STAT, I915_READ(PORT_HOTPLUG_STAT));
I915_WRITE(HWSTAM, 0xeffe);
for_each_pipe(pipe)
......@@ -2336,11 +2334,13 @@ static void i965_irq_preinstall(struct drm_device * dev)
static int i965_irq_postinstall(struct drm_device *dev)
{
drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
u32 hotplug_en;
u32 enable_mask;
u32 error_mask;
/* Unmask the interrupts that we always want on. */
dev_priv->irq_mask = ~(I915_ASLE_INTERRUPT |
I915_DISPLAY_PORT_INTERRUPT |
I915_DISPLAY_PIPE_A_EVENT_INTERRUPT |
I915_DISPLAY_PIPE_B_EVENT_INTERRUPT |
I915_DISPLAY_PLANE_A_FLIP_PENDING_INTERRUPT |
......@@ -2356,13 +2356,6 @@ static int i965_irq_postinstall(struct drm_device *dev)
dev_priv->pipestat[0] = 0;
dev_priv->pipestat[1] = 0;
if (I915_HAS_HOTPLUG(dev)) {
/* Enable in IER... */
enable_mask |= I915_DISPLAY_PORT_INTERRUPT;
/* and unmask in IMR */
dev_priv->irq_mask &= ~I915_DISPLAY_PORT_INTERRUPT;
}
/*
* Enable some error detection, note the instruction error mask
* bit is reserved, so we leave it masked.
......@@ -2382,36 +2375,33 @@ static int i965_irq_postinstall(struct drm_device *dev)
I915_WRITE(IER, enable_mask);
POSTING_READ(IER);
if (I915_HAS_HOTPLUG(dev)) {
u32 hotplug_en = I915_READ(PORT_HOTPLUG_EN);
/* Note HDMI and DP share bits */
if (dev_priv->hotplug_supported_mask & HDMIB_HOTPLUG_INT_STATUS)
hotplug_en |= HDMIB_HOTPLUG_INT_EN;
if (dev_priv->hotplug_supported_mask & HDMIC_HOTPLUG_INT_STATUS)
hotplug_en |= HDMIC_HOTPLUG_INT_EN;
if (dev_priv->hotplug_supported_mask & HDMID_HOTPLUG_INT_STATUS)
hotplug_en |= HDMID_HOTPLUG_INT_EN;
if (dev_priv->hotplug_supported_mask & SDVOC_HOTPLUG_INT_STATUS)
hotplug_en |= SDVOC_HOTPLUG_INT_EN;
if (dev_priv->hotplug_supported_mask & SDVOB_HOTPLUG_INT_STATUS)
hotplug_en |= SDVOB_HOTPLUG_INT_EN;
if (dev_priv->hotplug_supported_mask & CRT_HOTPLUG_INT_STATUS) {
hotplug_en |= CRT_HOTPLUG_INT_EN;
/* Note HDMI and DP share hotplug bits */
hotplug_en = 0;
if (dev_priv->hotplug_supported_mask & HDMIB_HOTPLUG_INT_STATUS)
hotplug_en |= HDMIB_HOTPLUG_INT_EN;
if (dev_priv->hotplug_supported_mask & HDMIC_HOTPLUG_INT_STATUS)
hotplug_en |= HDMIC_HOTPLUG_INT_EN;
if (dev_priv->hotplug_supported_mask & HDMID_HOTPLUG_INT_STATUS)
hotplug_en |= HDMID_HOTPLUG_INT_EN;
if (dev_priv->hotplug_supported_mask & SDVOC_HOTPLUG_INT_STATUS)
hotplug_en |= SDVOC_HOTPLUG_INT_EN;
if (dev_priv->hotplug_supported_mask & SDVOB_HOTPLUG_INT_STATUS)
hotplug_en |= SDVOB_HOTPLUG_INT_EN;
if (dev_priv->hotplug_supported_mask & CRT_HOTPLUG_INT_STATUS) {
hotplug_en |= CRT_HOTPLUG_INT_EN;
/* Programming the CRT detection parameters tends
to generate a spurious hotplug event about three
seconds later. So just do it once.
*/
if (IS_G4X(dev))
hotplug_en |= CRT_HOTPLUG_ACTIVATION_PERIOD_64;
hotplug_en |= CRT_HOTPLUG_VOLTAGE_COMPARE_50;
}
/* Programming the CRT detection parameters tends
to generate a spurious hotplug event about three
seconds later. So just do it once.
*/
if (IS_G4X(dev))
hotplug_en |= CRT_HOTPLUG_ACTIVATION_PERIOD_64;
hotplug_en |= CRT_HOTPLUG_VOLTAGE_COMPARE_50;
}
/* Ignore TV since it's buggy */
/* Ignore TV since it's buggy */
I915_WRITE(PORT_HOTPLUG_EN, hotplug_en);
}
I915_WRITE(PORT_HOTPLUG_EN, hotplug_en);
intel_opregion_enable_asle(dev);
......@@ -2469,8 +2459,7 @@ static irqreturn_t i965_irq_handler(DRM_IRQ_ARGS)
ret = IRQ_HANDLED;
/* Consume port. Then clear IIR or we'll miss events */
if ((I915_HAS_HOTPLUG(dev)) &&
(iir & I915_DISPLAY_PORT_INTERRUPT)) {
if (iir & I915_DISPLAY_PORT_INTERRUPT) {
u32 hotplug_status = I915_READ(PORT_HOTPLUG_STAT);
DRM_DEBUG_DRIVER("hotplug event received, stat 0x%08x\n",
......@@ -2543,10 +2532,8 @@ static void i965_irq_uninstall(struct drm_device * dev)
if (!dev_priv)
return;
if (I915_HAS_HOTPLUG(dev)) {
I915_WRITE(PORT_HOTPLUG_EN, 0);
I915_WRITE(PORT_HOTPLUG_STAT, I915_READ(PORT_HOTPLUG_STAT));
}
I915_WRITE(PORT_HOTPLUG_EN, 0);
I915_WRITE(PORT_HOTPLUG_STAT, I915_READ(PORT_HOTPLUG_STAT));
I915_WRITE(HWSTAM, 0xffffffff);
for_each_pipe(pipe)
......
Supports Markdown
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment