Commit ad51eddd authored by Arnaud Ebalard's avatar Arnaud Ebalard Committed by Jason Cooper
Browse files

ARM: mvebu: Enable NAND controller in ReadyNAS 2120 .dts file

Now that NAND controller support is available for Armada XP
(cb28e253: ARM: mvebu: Add support for NAND controller in
Armada 370/XP), this patch enables support for ReadyNAS 2120
and defines default partition layout as delivered by NETGEAR.

As described in similar commits 2be2bc39 (ARM: mvebu: Enable
NAND controller in Armada XP GP board) and d8c552dd

 (ARM:
mvebu: Enable NAND controller in Armada 370 Mirabox),
"marvell,keep-config" parameter is used as current support does
not allow for setting of timing parameters yet.
Signed-off-by: default avatarArnaud Ebalard <arno@natisbad.org>
Signed-off-by: default avatarJason Cooper <jason@lakedaemon.net>
parent 0373a558
......@@ -211,6 +211,42 @@
reg = <0x4c>;
};
};
nand@d0000 {
status = "okay";
num-cs = <1>;
marvell,nand-keep-config;
marvell,nand-enable-arbiter;
nand-on-flash-bbt;
partition@0 {
label = "u-boot";
reg = <0x0000000 0x180000>; /* 1.5MB */
read-only;
};
partition@180000 {
label = "u-boot-env";
reg = <0x180000 0x20000>; /* 128KB */
read-only;
};
partition@200000 {
label = "uImage";
reg = <0x0200000 0x600000>; /* 6MB */
};
partition@800000 {
label = "minirootfs";
reg = <0x0800000 0x400000>; /* 4MB */
};
/* Last MB is for the BBT, i.e. not writable */
partition@c00000 {
label = "ubifs";
reg = <0x0c00000 0x7400000>; /* 116MB */
};
};
};
};
......
Markdown is supported
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment