diff --git a/drivers/net/s2io-regs.h b/drivers/net/s2io-regs.h
index 7cefe5507b9e128bef1f621aeb29837105c254cf..00179bc3437fccea29fa780d9df5da4233d1f886 100644
--- a/drivers/net/s2io-regs.h
+++ b/drivers/net/s2io-regs.h
@@ -814,6 +814,17 @@ typedef struct _XENA_dev_config {
u64 rxgxs_ber_0; /* CHANGED */
u64 rxgxs_ber_1; /* CHANGED */
+ u64 spi_control;
+#define SPI_CONTROL_KEY(key) vBIT(key,0,4)
+#define SPI_CONTROL_BYTECNT(cnt) vBIT(cnt,29,3)
+#define SPI_CONTROL_CMD(cmd) vBIT(cmd,32,8)
+#define SPI_CONTROL_ADDR(addr) vBIT(addr,40,24)
+#define SPI_CONTROL_SEL1 BIT(4)
+#define SPI_CONTROL_REQ BIT(7)
+#define SPI_CONTROL_NACK BIT(5)
+#define SPI_CONTROL_DONE BIT(6)
+ u64 spi_data;
+#define SPI_DATA_WRITE(data,len) vBIT(data,0,len)
} XENA_dev_config_t;
#define XENA_REG_SPACE sizeof(XENA_dev_config_t)
diff --git a/drivers/net/s2io.c b/drivers/net/s2io.c
index fcf61107046e477d055e19ac4bd31df279e1d48f..30fbaf04773f5856fd0330292daa1753c302d5f9 100644
--- a/drivers/net/s2io.c
+++ b/drivers/net/s2io.c
@@ -4378,29 +4378,53 @@ static int s2io_ethtool_setpause_data(struct net_device *dev,
*/
#define S2IO_DEV_ID 5
-static int read_eeprom(nic_t * sp, int off, u32 * data)
+static int read_eeprom(nic_t * sp, int off, u64 * data)
{
int ret = -1;
u32 exit_cnt = 0;
u64 val64;
XENA_dev_config_t __iomem *bar0 = sp->bar0;
- val64 = I2C_CONTROL_DEV_ID(S2IO_DEV_ID) | I2C_CONTROL_ADDR(off) |
- I2C_CONTROL_BYTE_CNT(0x3) | I2C_CONTROL_READ |
- I2C_CONTROL_CNTL_START;
- SPECIAL_REG_WRITE(val64, &bar0->i2c_control, LF);
+ if (sp->device_type == XFRAME_I_DEVICE) {
+ val64 = I2C_CONTROL_DEV_ID(S2IO_DEV_ID) | I2C_CONTROL_ADDR(off) |
+ I2C_CONTROL_BYTE_CNT(0x3) | I2C_CONTROL_READ |
+ I2C_CONTROL_CNTL_START;
+ SPECIAL_REG_WRITE(val64, &bar0->i2c_control, LF);
- while (exit_cnt < 5) {
- val64 = readq(&bar0->i2c_control);
- if (I2C_CONTROL_CNTL_END(val64)) {
- *data = I2C_CONTROL_GET_DATA(val64);
- ret = 0;
- break;
+ while (exit_cnt < 5) {
+ val64 = readq(&bar0->i2c_control);
+ if (I2C_CONTROL_CNTL_END(val64)) {
+ *data = I2C_CONTROL_GET_DATA(val64);
+ ret = 0;
+ break;
+ }
+ msleep(50);
+ exit_cnt++;
}
- msleep(50);
- exit_cnt++;
}
+ if (sp->device_type == XFRAME_II_DEVICE) {
+ val64 = SPI_CONTROL_KEY(0x9) | SPI_CONTROL_SEL1 |
+ SPI_CONTROL_BYTECNT(0x3) |
+ SPI_CONTROL_CMD(0x3) | SPI_CONTROL_ADDR(off);
+ SPECIAL_REG_WRITE(val64, &bar0->spi_control, LF);
+ val64 |= SPI_CONTROL_REQ;
+ SPECIAL_REG_WRITE(val64, &bar0->spi_control, LF);
+ while (exit_cnt < 5) {
+ val64 = readq(&bar0->spi_control);
+ if (val64 & SPI_CONTROL_NACK) {
+ ret = 1;
+ break;
+ } else if (val64 & SPI_CONTROL_DONE) {
+ *data = readq(&bar0->spi_data);
+ *data &= 0xffffff;
+ ret = 0;
+ break;
+ }
+ msleep(50);
+ exit_cnt++;
+ }
+ }
return ret;
}
@@ -4419,28 +4443,53 @@ static int read_eeprom(nic_t * sp, int off, u32 * data)
* 0 on success, -1 on failure.
*/
-static int write_eeprom(nic_t * sp, int off, u32 data, int cnt)
+static int write_eeprom(nic_t * sp, int off, u64 data, int cnt)
{
int exit_cnt = 0, ret = -1;
u64 val64;
XENA_dev_config_t __iomem *bar0 = sp->bar0;
- val64 = I2C_CONTROL_DEV_ID(S2IO_DEV_ID) | I2C_CONTROL_ADDR(off) |
- I2C_CONTROL_BYTE_CNT(cnt) | I2C_CONTROL_SET_DATA(data) |
- I2C_CONTROL_CNTL_START;
- SPECIAL_REG_WRITE(val64, &bar0->i2c_control, LF);
+ if (sp->device_type == XFRAME_I_DEVICE) {
+ val64 = I2C_CONTROL_DEV_ID(S2IO_DEV_ID) | I2C_CONTROL_ADDR(off) |
+ I2C_CONTROL_BYTE_CNT(cnt) | I2C_CONTROL_SET_DATA((u32)data) |
+ I2C_CONTROL_CNTL_START;
+ SPECIAL_REG_WRITE(val64, &bar0->i2c_control, LF);
+
+ while (exit_cnt < 5) {
+ val64 = readq(&bar0->i2c_control);
+ if (I2C_CONTROL_CNTL_END(val64)) {
+ if (!(val64 & I2C_CONTROL_NACK))
+ ret = 0;
+ break;
+ }
+ msleep(50);
+ exit_cnt++;
+ }
+ }
- while (exit_cnt < 5) {
- val64 = readq(&bar0->i2c_control);
- if (I2C_CONTROL_CNTL_END(val64)) {
- if (!(val64 & I2C_CONTROL_NACK))
+ if (sp->device_type == XFRAME_II_DEVICE) {
+ int write_cnt = (cnt == 8) ? 0 : cnt;
+ writeq(SPI_DATA_WRITE(data,(cnt<<3)), &bar0->spi_data);
+
+ val64 = SPI_CONTROL_KEY(0x9) | SPI_CONTROL_SEL1 |
+ SPI_CONTROL_BYTECNT(write_cnt) |
+ SPI_CONTROL_CMD(0x2) | SPI_CONTROL_ADDR(off);
+ SPECIAL_REG_WRITE(val64, &bar0->spi_control, LF);
+ val64 |= SPI_CONTROL_REQ;
+ SPECIAL_REG_WRITE(val64, &bar0->spi_control, LF);
+ while (exit_cnt < 5) {
+ val64 = readq(&bar0->spi_control);
+ if (val64 & SPI_CONTROL_NACK) {
+ ret = 1;
+ break;
+ } else if (val64 & SPI_CONTROL_DONE) {
ret = 0;
- break;
+ break;
+ }
+ msleep(50);
+ exit_cnt++;
}
- msleep(50);
- exit_cnt++;
}
-
return ret;
}
@@ -4460,7 +4509,8 @@ static int write_eeprom(nic_t * sp, int off, u32 data, int cnt)
static int s2io_ethtool_geeprom(struct net_device *dev,
struct ethtool_eeprom *eeprom, u8 * data_buf)
{
- u32 data, i, valid;
+ u32 i, valid;
+ u64 data;
nic_t *sp = dev->priv;
eeprom->magic = sp->pdev->vendor | (sp->pdev->device << 16);
@@ -4498,7 +4548,7 @@ static int s2io_ethtool_seeprom(struct net_device *dev,
u8 * data_buf)
{
int len = eeprom->len, cnt = 0;
- u32 valid = 0, data;
+ u64 valid = 0, data;
nic_t *sp = dev->priv;
if (eeprom->magic != (sp->pdev->vendor | (sp->pdev->device << 16))) {
@@ -4546,7 +4596,7 @@ static int s2io_ethtool_seeprom(struct net_device *dev,
static int s2io_register_test(nic_t * sp, uint64_t * data)
{
XENA_dev_config_t __iomem *bar0 = sp->bar0;
- u64 val64 = 0;
+ u64 val64 = 0, exp_val;
int fail = 0;
val64 = readq(&bar0->pif_rd_swapper_fb);
@@ -4562,7 +4612,11 @@ static int s2io_register_test(nic_t * sp, uint64_t * data)
}
val64 = readq(&bar0->rx_queue_cfg);
- if (val64 != 0x0808080808080808ULL) {
+ if (sp->device_type == XFRAME_II_DEVICE)
+ exp_val = 0x0404040404040404ULL;
+ else
+ exp_val = 0x0808080808080808ULL;
+ if (val64 != exp_val) {
fail = 1;
DBG_PRINT(INFO_DBG, "Read Test level 3 fails\n");
}
@@ -4590,7 +4644,7 @@ static int s2io_register_test(nic_t * sp, uint64_t * data)
}
*data = fail;
- return 0;
+ return fail;
}
/**
@@ -4609,58 +4663,83 @@ static int s2io_register_test(nic_t * sp, uint64_t * data)
static int s2io_eeprom_test(nic_t * sp, uint64_t * data)
{
int fail = 0;
- u32 ret_data;
+ u64 ret_data, org_4F0, org_7F0;
+ u8 saved_4F0 = 0, saved_7F0 = 0;
+ struct net_device *dev = sp->dev;
/* Test Write Error at offset 0 */
- if (!write_eeprom(sp, 0, 0, 3))
- fail = 1;
+ /* Note that SPI interface allows write access to all areas
+ * of EEPROM. Hence doing all negative testing only for Xframe I.
+ */
+ if (sp->device_type == XFRAME_I_DEVICE)
+ if (!write_eeprom(sp, 0, 0, 3))
+ fail = 1;
+
+ /* Save current values at offsets 0x4F0 and 0x7F0 */
+ if (!read_eeprom(sp, 0x4F0, &org_4F0))
+ saved_4F0 = 1;
+ if (!read_eeprom(sp, 0x7F0, &org_7F0))
+ saved_7F0 = 1;
/* Test Write at offset 4f0 */
- if (write_eeprom(sp, 0x4F0, 0x01234567, 3))
+ if (write_eeprom(sp, 0x4F0, 0x012345, 3))
fail = 1;
if (read_eeprom(sp, 0x4F0, &ret_data))
fail = 1;
- if (ret_data != 0x01234567)
+ if (ret_data != 0x012345) {
+ DBG_PRINT(ERR_DBG, "%s: eeprom test error at offset 0x4F0. Data written %llx Data read %llx\n", dev->name, (u64)0x12345, ret_data);
fail = 1;
+ }
/* Reset the EEPROM data go FFFF */
- write_eeprom(sp, 0x4F0, 0xFFFFFFFF, 3);
+ write_eeprom(sp, 0x4F0, 0xFFFFFF, 3);
/* Test Write Request Error at offset 0x7c */
- if (!write_eeprom(sp, 0x07C, 0, 3))
- fail = 1;
+ if (sp->device_type == XFRAME_I_DEVICE)
+ if (!write_eeprom(sp, 0x07C, 0, 3))
+ fail = 1;
- /* Test Write Request at offset 0x7fc */
- if (write_eeprom(sp, 0x7FC, 0x01234567, 3))
+ /* Test Write Request at offset 0x7f0 */
+ if (write_eeprom(sp, 0x7F0, 0x012345, 3))
fail = 1;
- if (read_eeprom(sp, 0x7FC, &ret_data))
+ if (read_eeprom(sp, 0x7F0, &ret_data))
fail = 1;
- if (ret_data != 0x01234567)
+ if (ret_data != 0x012345) {
+ DBG_PRINT(ERR_DBG, "%s: eeprom test error at offset 0x7F0. Data written %llx Data read %llx\n", dev->name, (u64)0x12345, ret_data);
fail = 1;
+ }
/* Reset the EEPROM data go FFFF */
- write_eeprom(sp, 0x7FC, 0xFFFFFFFF, 3);
+ write_eeprom(sp, 0x7F0, 0xFFFFFF, 3);
- /* Test Write Error at offset 0x80 */
- if (!write_eeprom(sp, 0x080, 0, 3))
- fail = 1;
+ if (sp->device_type == XFRAME_I_DEVICE) {
+ /* Test Write Error at offset 0x80 */
+ if (!write_eeprom(sp, 0x080, 0, 3))
+ fail = 1;
- /* Test Write Error at offset 0xfc */
- if (!write_eeprom(sp, 0x0FC, 0, 3))
- fail = 1;
+ /* Test Write Error at offset 0xfc */
+ if (!write_eeprom(sp, 0x0FC, 0, 3))
+ fail = 1;
- /* Test Write Error at offset 0x100 */
- if (!write_eeprom(sp, 0x100, 0, 3))
- fail = 1;
+ /* Test Write Error at offset 0x100 */
+ if (!write_eeprom(sp, 0x100, 0, 3))
+ fail = 1;
- /* Test Write Error at offset 4ec */
- if (!write_eeprom(sp, 0x4EC, 0, 3))
- fail = 1;
+ /* Test Write Error at offset 4ec */
+ if (!write_eeprom(sp, 0x4EC, 0, 3))
+ fail = 1;
+ }
+
+ /* Restore values at offsets 0x4F0 and 0x7F0 */
+ if (saved_4F0)
+ write_eeprom(sp, 0x4F0, org_4F0, 3);
+ if (saved_7F0)
+ write_eeprom(sp, 0x7F0, org_7F0, 3);
*data = fail;
- return 0;
+ return fail;
}
/**
@@ -4742,7 +4821,7 @@ static int s2io_rldram_test(nic_t * sp, uint64_t * data)
{
XENA_dev_config_t __iomem *bar0 = sp->bar0;
u64 val64;
- int cnt, iteration = 0, test_pass = 0;
+ int cnt, iteration = 0, test_fail = 0;
val64 = readq(&bar0->adapter_control);
val64 &= ~ADAPTER_ECC_EN;
@@ -4750,7 +4829,7 @@ static int s2io_rldram_test(nic_t * sp, uint64_t * data)
val64 = readq(&bar0->mc_rldram_test_ctrl);
val64 |= MC_RLDRAM_TEST_MODE;
- writeq(val64, &bar0->mc_rldram_test_ctrl);
+ SPECIAL_REG_WRITE(val64, &bar0->mc_rldram_test_ctrl, LF);
val64 = readq(&bar0->mc_rldram_mrs);
val64 |= MC_RLDRAM_QUEUE_SIZE_ENABLE;
@@ -4778,17 +4857,12 @@ static int s2io_rldram_test(nic_t * sp, uint64_t * data)
}
writeq(val64, &bar0->mc_rldram_test_d2);
- val64 = (u64) (0x0000003fffff0000ULL);
+ val64 = (u64) (0x0000003ffffe0100ULL);
writeq(val64, &bar0->mc_rldram_test_add);
-
- val64 = MC_RLDRAM_TEST_MODE;
- writeq(val64, &bar0->mc_rldram_test_ctrl);
-
- val64 |=
- MC_RLDRAM_TEST_MODE | MC_RLDRAM_TEST_WRITE |
- MC_RLDRAM_TEST_GO;
- writeq(val64, &bar0->mc_rldram_test_ctrl);
+ val64 = MC_RLDRAM_TEST_MODE | MC_RLDRAM_TEST_WRITE |
+ MC_RLDRAM_TEST_GO;
+ SPECIAL_REG_WRITE(val64, &bar0->mc_rldram_test_ctrl, LF);
for (cnt = 0; cnt < 5; cnt++) {
val64 = readq(&bar0->mc_rldram_test_ctrl);
@@ -4800,11 +4874,8 @@ static int s2io_rldram_test(nic_t * sp, uint64_t * data)
if (cnt == 5)
break;
- val64 = MC_RLDRAM_TEST_MODE;
- writeq(val64, &bar0->mc_rldram_test_ctrl);
-
- val64 |= MC_RLDRAM_TEST_MODE | MC_RLDRAM_TEST_GO;
- writeq(val64, &bar0->mc_rldram_test_ctrl);
+ val64 = MC_RLDRAM_TEST_MODE | MC_RLDRAM_TEST_GO;
+ SPECIAL_REG_WRITE(val64, &bar0->mc_rldram_test_ctrl, LF);
for (cnt = 0; cnt < 5; cnt++) {
val64 = readq(&bar0->mc_rldram_test_ctrl);
@@ -4817,18 +4888,18 @@ static int s2io_rldram_test(nic_t * sp, uint64_t * data)
break;
val64 = readq(&bar0->mc_rldram_test_ctrl);
- if (val64 & MC_RLDRAM_TEST_PASS)
- test_pass = 1;
+ if (!(val64 & MC_RLDRAM_TEST_PASS))
+ test_fail = 1;
iteration++;
}
- if (!test_pass)
- *data = 1;
- else
- *data = 0;
+ *data = test_fail;
- return 0;
+ /* Bring the adapter out of test mode */
+ SPECIAL_REG_WRITE(0, &bar0->mc_rldram_test_ctrl, LF);
+
+ return test_fail;
}
/**