Commit abfabc9b authored by Larry Finger's avatar Larry Finger Committed by John W. Linville
Browse files

rtlwifi: rtl8192cu: Fix endianian issues



Driver rtlwifi fails on a big-endian host.

These changes have been tested on a Mac PowerBook G4, which has
a PPC processor.

Although this patch touches some of the code that will affect endian
issues on PCI hardware through drivers rtl8192ce, rtl8192se, and
rtl8192de, these have not been tested due to lack of suitable hardware.
Signed-off-by: default avatarLarry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: default avatarJohn W. Linville <linville@tuxdriver.com>
parent ff6ff96b
......@@ -344,9 +344,9 @@ static void _rtl_init_mac80211(struct ieee80211_hw *hw)
if (is_valid_ether_addr(rtlefuse->dev_addr)) {
SET_IEEE80211_PERM_ADDR(hw, rtlefuse->dev_addr);
} else {
u8 rtlmac[] = { 0x00, 0xe0, 0x4c, 0x81, 0x92, 0x00 };
get_random_bytes((rtlmac + (ETH_ALEN - 1)), 1);
SET_IEEE80211_PERM_ADDR(hw, rtlmac);
u8 rtlmac1[] = { 0x00, 0xe0, 0x4c, 0x81, 0x92, 0x00 };
get_random_bytes((rtlmac1 + (ETH_ALEN - 1)), 1);
SET_IEEE80211_PERM_ADDR(hw, rtlmac1);
}
}
......
......@@ -76,7 +76,7 @@ enum ap_peer {
SET_BITS_TO_LE_2BYTE(_hdr, 8, 1, _val)
#define SET_80211_PS_POLL_AID(_hdr, _val) \
(*(u16 *)((u8 *)(_hdr) + 2) = le16_to_cpu(_val))
(*(u16 *)((u8 *)(_hdr) + 2) = _val)
#define SET_80211_PS_POLL_BSSID(_hdr, _val) \
memcpy(((u8 *)(_hdr)) + 4, (u8 *)(_val), ETH_ALEN)
#define SET_80211_PS_POLL_TA(_hdr, _val) \
......
......@@ -108,6 +108,7 @@ static void _rtl92c_fw_block_write(struct ieee80211_hw *hw,
u8 *bufferPtr = (u8 *) buffer;
u32 *pu4BytePtr = (u32 *) buffer;
u32 i, offset, blockCount, remainSize;
u32 data;
if (rtlpriv->io.writeN_sync) {
rtl_block_fw_writeN(hw, buffer, size);
......@@ -115,20 +116,22 @@ static void _rtl92c_fw_block_write(struct ieee80211_hw *hw,
}
blockCount = size / blockSize;
remainSize = size % blockSize;
if (remainSize) {
/* the last word is < 4 bytes - pad it with zeros */
for (i = 0; i < 4 - remainSize; i++)
*(bufferPtr + size + i) = 0;
blockCount++;
}
for (i = 0; i < blockCount; i++) {
offset = i * blockSize;
/* for big-endian platforms, the firmware data need to be byte
* swapped as it was read as a byte string and will be written
* as 32-bit dwords and byte swapped when written
*/
data = le32_to_cpu(*(__le32 *)(pu4BytePtr + i));
rtl_write_dword(rtlpriv, (FW_8192C_START_ADDRESS + offset),
*(pu4BytePtr + i));
}
if (remainSize) {
offset = blockCount * blockSize;
bufferPtr += offset;
for (i = 0; i < remainSize; i++) {
rtl_write_byte(rtlpriv, (FW_8192C_START_ADDRESS +
offset + i), *(bufferPtr + i));
}
data);
}
}
......@@ -269,8 +272,9 @@ int rtl92c_download_fw(struct ieee80211_hw *hw)
if (IS_FW_HEADER_EXIST(pfwheader)) {
RT_TRACE(rtlpriv, COMP_FW, DBG_DMESG,
("Firmware Version(%d), Signature(%#x),Size(%d)\n",
pfwheader->version, pfwheader->signature,
(uint)sizeof(struct rtl92c_firmware_header)));
le16_to_cpu(pfwheader->version),
le16_to_cpu(pfwheader->signature),
(uint)sizeof(struct rtl92c_firmware_header)));
pfwdata = pfwdata + sizeof(struct rtl92c_firmware_header);
fwsize = fwsize - sizeof(struct rtl92c_firmware_header);
......
......@@ -38,26 +38,26 @@
#define FW_8192C_POLLING_TIMEOUT_COUNT 100
#define IS_FW_HEADER_EXIST(_pfwhdr) \
((_pfwhdr->signature&0xFFF0) == 0x92C0 ||\
(_pfwhdr->signature&0xFFF0) == 0x88C0)
((le16_to_cpu(_pfwhdr->signature)&0xFFF0) == 0x92C0 ||\
(le16_to_cpu(_pfwhdr->signature)&0xFFF0) == 0x88C0)
struct rtl92c_firmware_header {
u16 signature;
__le16 signature;
u8 category;
u8 function;
u16 version;
__le16 version;
u8 subversion;
u8 rsvd1;
u8 month;
u8 date;
u8 hour;
u8 minute;
u16 ramcodeSize;
u16 rsvd2;
u32 svnindex;
u32 rsvd3;
u32 rsvd4;
u32 rsvd5;
__le16 ramcodeSize;
__le16 rsvd2;
__le32 svnindex;
__le32 rsvd3;
__le32 rsvd4;
__le32 rsvd5;
};
enum rtl8192c_h2c_cmd {
......
......@@ -498,7 +498,7 @@ static void _rtl92cu_read_adapter_info(struct ieee80211_hw *hw)
}
RT_PRINT_DATA(rtlpriv, COMP_INIT, DBG_LOUD, ("MAP\n"),
hwinfo, HWSET_MAX_SIZE);
eeprom_id = *((u16 *)&hwinfo[0]);
eeprom_id = le16_to_cpu(*((__le16 *)&hwinfo[0]));
if (eeprom_id != RTL8190_EEPROM_ID) {
RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
("EEPROM ID(%#x) is invalid!!\n", eeprom_id));
......@@ -516,13 +516,14 @@ static void _rtl92cu_read_adapter_info(struct ieee80211_hw *hw)
pr_info("MAC address: %pM\n", rtlefuse->dev_addr);
_rtl92cu_read_txpower_info_from_hwpg(hw,
rtlefuse->autoload_failflag, hwinfo);
rtlefuse->eeprom_vid = *(u16 *)&hwinfo[EEPROM_VID];
rtlefuse->eeprom_did = *(u16 *)&hwinfo[EEPROM_DID];
rtlefuse->eeprom_vid = le16_to_cpu(*(__le16 *)&hwinfo[EEPROM_VID]);
rtlefuse->eeprom_did = le16_to_cpu(*(__le16 *)&hwinfo[EEPROM_DID]);
RT_TRACE(rtlpriv, COMP_INIT, DBG_DMESG,
(" VID = 0x%02x PID = 0x%02x\n",
rtlefuse->eeprom_vid, rtlefuse->eeprom_did));
rtlefuse->eeprom_channelplan = *(u8 *)&hwinfo[EEPROM_CHANNELPLAN];
rtlefuse->eeprom_version = *(u16 *)&hwinfo[EEPROM_VERSION];
rtlefuse->eeprom_version =
le16_to_cpu(*(__le16 *)&hwinfo[EEPROM_VERSION]);
rtlefuse->txpwr_fromeprom = true;
rtlefuse->eeprom_oemid = *(u8 *)&hwinfo[EEPROM_CUSTOMER_ID];
RT_TRACE(rtlpriv, COMP_INIT, DBG_LOUD,
......
......@@ -491,7 +491,7 @@ static void _rtl_tx_desc_checksum(u8 *txdesc)
SET_TX_DESC_TX_DESC_CHECKSUM(txdesc, 0);
for (index = 0; index < 16; index++)
checksum = checksum ^ (*(ptr + index));
SET_TX_DESC_TX_DESC_CHECKSUM(txdesc, checksum);
SET_TX_DESC_TX_DESC_CHECKSUM(txdesc, cpu_to_le16(checksum));
}
void rtl92cu_tx_fill_desc(struct ieee80211_hw *hw,
......
......@@ -82,6 +82,7 @@ static int _usbctrl_vendorreq_async_write(struct usb_device *udev, u8 request,
dr->wValue = cpu_to_le16(value);
dr->wIndex = cpu_to_le16(index);
dr->wLength = cpu_to_le16(len);
/* data are already in little-endian order */
memcpy(buf, pdata, len);
usb_fill_control_urb(urb, udev, pipe,
(unsigned char *)dr, buf, len,
......@@ -101,6 +102,7 @@ static int _usbctrl_vendorreq_sync_read(struct usb_device *udev, u8 request,
int status;
u8 reqtype;
int vendorreq_times = 0;
static int count;
pipe = usb_rcvctrlpipe(udev, 0); /* read_in */
reqtype = REALTEK_USB_VENQT_READ;
......@@ -117,9 +119,9 @@ static int _usbctrl_vendorreq_sync_read(struct usb_device *udev, u8 request,
break;
}
}
if (status < 0)
if (status < 0 && count++ < 4)
pr_err("reg 0x%x, usbctrl_vendorreq TimeOut! status:0x%x value=0x%x\n",
value, status, *(u32 *)pdata);
value, status, le32_to_cpu(*(u32 *)pdata));
return status;
}
......@@ -139,7 +141,7 @@ static u32 _usb_read_sync(struct usb_device *udev, u32 addr, u16 len)
wvalue = (u16)addr;
_usbctrl_vendorreq_sync_read(udev, request, wvalue, index, data, len);
ret = *data;
ret = le32_to_cpu(*data);
kfree(data);
return ret;
}
......@@ -171,12 +173,12 @@ static void _usb_write_async(struct usb_device *udev, u32 addr, u32 val,
u8 request;
u16 wvalue;
u16 index;
u32 data;
__le32 data;
request = REALTEK_USB_VENQT_CMD_REQ;
index = REALTEK_USB_VENQT_CMD_IDX; /* n/a */
wvalue = (u16)(addr&0x0000ffff);
data = val;
data = cpu_to_le32(val);
_usbctrl_vendorreq_async_write(udev, request, wvalue, index, &data,
len);
}
......
Supports Markdown
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment