Commit a5e70697 authored by Simon Wunderlich's avatar Simon Wunderlich Committed by Johannes Berg

mac80211: add radiotap flag and handling for 5/10 MHz

Wireshark already defines radiotap channel flags for 5 and 10 MHz, so
just use them in Linux radiotap too. Furthermore, add rx status flags to
allow drivers to report when they received data on 5 or 10 MHz channels.
Signed-off-by: default avatarSimon Wunderlich <siwu@hrz.tu-chemnitz.de>
Signed-off-by: default avatarMathias Kretschmer <mathias.kretschmer@fokus.fraunhofer.de>
Signed-off-by: default avatarJohannes Berg <johannes@sipsolutions.net>
parent 438b61b7
......@@ -230,6 +230,10 @@ enum ieee80211_radiotap_type {
#define IEEE80211_CHAN_PASSIVE 0x0200 /* Only passive scan allowed */
#define IEEE80211_CHAN_DYN 0x0400 /* Dynamic CCK-OFDM channel */
#define IEEE80211_CHAN_GFSK 0x0800 /* GFSK channel (FHSS PHY) */
#define IEEE80211_CHAN_GSM 0x1000 /* GSM (900 MHz) */
#define IEEE80211_CHAN_STURBO 0x2000 /* Static Turbo */
#define IEEE80211_CHAN_HALF 0x4000 /* Half channel (10 MHz wide) */
#define IEEE80211_CHAN_QUARTER 0x8000 /* Quarter channel (5 MHz wide) */
/* For IEEE80211_RADIOTAP_FLAGS */
#define IEEE80211_RADIOTAP_F_CFP 0x01 /* sent/received
......
......@@ -811,6 +811,8 @@ ieee80211_tx_info_clear_status(struct ieee80211_tx_info *info)
* @RX_FLAG_AMPDU_DELIM_CRC_KNOWN: The delimiter CRC field is known (the CRC
* is stored in the @ampdu_delimiter_crc field)
* @RX_FLAG_STBC_MASK: STBC 2 bit bitmask. 1 - Nss=1, 2 - Nss=2, 3 - Nss=3
* @RX_FLAG_10MHZ: 10 MHz (half channel) was used
* @RX_FLAG_5MHZ: 5 MHz (quarter channel) was used
*/
enum mac80211_rx_flags {
RX_FLAG_MMIC_ERROR = BIT(0),
......@@ -839,6 +841,8 @@ enum mac80211_rx_flags {
RX_FLAG_80P80MHZ = BIT(24),
RX_FLAG_160MHZ = BIT(25),
RX_FLAG_STBC_MASK = BIT(26) | BIT(27),
RX_FLAG_10MHZ = BIT(28),
RX_FLAG_5MHZ = BIT(29),
};
#define RX_FLAG_STBC_SHIFT 26
......
......@@ -159,6 +159,7 @@ ieee80211_add_rx_radiotap_header(struct ieee80211_local *local,
__le32 *it_present;
u32 it_present_val;
u16 rx_flags = 0;
u16 channel_flags = 0;
int mpdulen, chain;
unsigned long chains = status->chains;
......@@ -243,20 +244,22 @@ ieee80211_add_rx_radiotap_header(struct ieee80211_local *local,
/* IEEE80211_RADIOTAP_CHANNEL */
put_unaligned_le16(status->freq, pos);
pos += 2;
if (status->flag & RX_FLAG_10MHZ)
channel_flags |= IEEE80211_CHAN_HALF;
else if (status->flag & RX_FLAG_5MHZ)
channel_flags |= IEEE80211_CHAN_QUARTER;
if (status->band == IEEE80211_BAND_5GHZ)
put_unaligned_le16(IEEE80211_CHAN_OFDM | IEEE80211_CHAN_5GHZ,
pos);
channel_flags |= IEEE80211_CHAN_OFDM | IEEE80211_CHAN_5GHZ;
else if (status->flag & (RX_FLAG_HT | RX_FLAG_VHT))
put_unaligned_le16(IEEE80211_CHAN_DYN | IEEE80211_CHAN_2GHZ,
pos);
channel_flags |= IEEE80211_CHAN_DYN | IEEE80211_CHAN_2GHZ;
else if (rate && rate->flags & IEEE80211_RATE_ERP_G)
put_unaligned_le16(IEEE80211_CHAN_OFDM | IEEE80211_CHAN_2GHZ,
pos);
channel_flags |= IEEE80211_CHAN_OFDM | IEEE80211_CHAN_2GHZ;
else if (rate)
put_unaligned_le16(IEEE80211_CHAN_CCK | IEEE80211_CHAN_2GHZ,
pos);
channel_flags |= IEEE80211_CHAN_OFDM | IEEE80211_CHAN_2GHZ;
else
put_unaligned_le16(IEEE80211_CHAN_2GHZ, pos);
channel_flags |= IEEE80211_CHAN_2GHZ;
put_unaligned_le16(channel_flags, pos);
pos += 2;
/* IEEE80211_RADIOTAP_DBM_ANTSIGNAL */
......
Markdown is supported
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment