Commit a58a414f authored by Adrian Bunk's avatar Adrian Bunk Committed by Adrian Bunk

spelling: s/usefull/useful/

Signed-off-by: default avatarAdrian Bunk <bunk@stusta.de>
parent f17578de
......@@ -245,7 +245,7 @@ Default: Both
This parameters is only relevant if auto-negotiation for this port is
not set to "Sense". If auto-negotiation is set to "On", all three values
are possible. If it is set to "Off", only "Full" and "Half" are allowed.
This parameter is usefull if your link partner does not support all
This parameter is useful if your link partner does not support all
possible combinations.
Flow Control
......
......@@ -212,7 +212,7 @@ A: Try running
cat `cat /proc/[0-9]*/maps | grep / | sed 's:.* /:/:' | sort -u` > /dev/null
after resume. swapoff -a; swapon -a may also be usefull.
after resume. swapoff -a; swapon -a may also be useful.
Q: What happens to devices during swsusp? They seem to be resumed
during system suspend?
......@@ -323,7 +323,7 @@ to be useless to try to suspend to disk while that app is running?
A: No, it should work okay, as long as your app does not mlock()
it. Just prepare big enough swap partition.
Q: What information is usefull for debugging suspend-to-disk problems?
Q: What information is useful for debugging suspend-to-disk problems?
A: Well, last messages on the screen are always useful. If something
is broken, it is usually some kernel driver, therefore trying with as
......
......@@ -251,7 +251,7 @@ export KBUILD_CHECKSRC KBUILD_SRC KBUILD_EXTMOD
# If it is set to "silent_", nothing wil be printed at all, since
# the variable $(silent_cmd_cc_o_c) doesn't exist.
#
# A simple variant is to prefix commands with $(Q) - that's usefull
# A simple variant is to prefix commands with $(Q) - that's useful
# for commands that shall be hidden in non-verbose mode.
#
# $(Q)ln $@ :<
......
......@@ -201,7 +201,7 @@ again:
if ((signed long)(get_ccount() - next) > 0)
goto again;
/* Allow platform to do something usefull (Wdog). */
/* Allow platform to do something useful (Wdog). */
platform_heartbeat();
......
......@@ -48,7 +48,7 @@ static int io = 0x384;
static int radio_nr = -1;
/* hw precision is 12.5 kHz
* It is only usefull to give freq in intervall of 200 (=0.0125Mhz),
* It is only useful to give freq in intervall of 200 (=0.0125Mhz),
* other bits will be truncated
*/
#define RSF16_ENCODE(x) ((x)/200+856)
......
......@@ -180,7 +180,7 @@ SkDimModerate(SK_AC *pAC) {
/*
** The number of interrupts per sec is the same as expected.
** Evalulate the descriptor-ratio. If it has changed, a resize
** in the moderation timer might be usefull
** in the moderation timer might be useful
*/
if (M_DIMINFO.AutoSizing) {
ResizeDimTimerDuration(pAC);
......
......@@ -2851,7 +2851,7 @@ unsigned long Flags; /* for spin lock */
* Description:
* This function is called if an ioctl is issued on the device.
* There are three subfunction for reading, writing and test-writing
* the private MIB data structure (usefull for SysKonnect-internal tools).
* the private MIB data structure (useful for SysKonnect-internal tools).
*
* Returns:
* 0, if everything is ok
......
......@@ -611,7 +611,7 @@ SK_U32 NetIndex) /* NetIndex (0..n), in single net mode always zero */
* Description:
* Calls a general sub-function for all this stuff. The preset does
* the same as a set, but returns just before finally setting the
* new value. This is usefull to check if a set might be successfull.
* new value. This is useful to check if a set might be successfull.
* If the instance -1 is passed, an array of values is supposed and
* all instances of the OID will be set.
*
......@@ -654,7 +654,7 @@ SK_U32 NetIndex) /* NetIndex (0..n), in single net mode always zero */
* Description:
* Calls a general sub-function for all this stuff. The preset does
* the same as a set, but returns just before finally setting the
* new value. This is usefull to check if a set might be successfull.
* new value. This is useful to check if a set might be successfull.
* If the instance -1 is passed, an array of values is supposed and
* all instances of the OID will be set.
*
......@@ -870,7 +870,7 @@ SK_U32 NetIndex) /* NetIndex (0..n), in single net mode always zero */
* Description:
* Calls a general sub-function for all this set stuff. The preset does
* the same as a set, but returns just before finally setting the
* new value. This is usefull to check if a set might be successfull.
* new value. This is useful to check if a set might be successfull.
* The sub-function runs through the IdTable, checks which OIDs are able
* to set, and calls the handler function of the OID to perform the
* preset. The return value of the function will also be stored in
......@@ -6473,7 +6473,7 @@ unsigned int PhysPortIndex) /* Physical port index */
*
* Description:
* The COMMON module only tells us if the mode is half or full duplex.
* But in the decade of auto sensing it is usefull for the user to
* But in the decade of auto sensing it is useful for the user to
* know if the mode was negotiated or forced. Therefore we have a
* look to the mode, which was last used by the negotiation process.
*
......
......@@ -3,7 +3,7 @@ menu "Dallas's 1-wire bus"
config W1
tristate "Dallas's 1-wire support"
---help---
Dallas's 1-wire bus is usefull to connect slow 1-pin devices
Dallas's 1-wire bus is useful to connect slow 1-pin devices
such as iButtons and thermal sensors.
If you want W1 support, you should say Y here.
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment