Commit a362fdbd authored by Tony Lindgren's avatar Tony Lindgren
Browse files

ARM: OMAP: No need to include board-omap2430sdp.h from hardware.h



Move the defines to the associated board file and remove
the now unnecessary header file. Also rename
SDP2430_ETHR_GPIO_IRQ to SDP2430_ETHR_GPIO_IRQ.
Signed-off-by: default avatarTony Lindgren <tony@atomide.com>
parent b2830810
......@@ -38,9 +38,12 @@
#include "mmc-twl4030.h"
#define SDP2430_CS0_BASE 0x04000000
#define SDP2430_FLASH_CS 0
#define SDP2430_SMC91X_CS 5
#define SDP2430_ETHR_GPIO_IRQ 149
static struct mtd_partition sdp2430_partitions[] = {
/* bootloader (U-Boot, etc) in first sector */
{
......@@ -102,8 +105,8 @@ static struct resource sdp2430_smc91x_resources[] = {
.flags = IORESOURCE_MEM,
},
[1] = {
.start = OMAP_GPIO_IRQ(OMAP24XX_ETHR_GPIO_IRQ),
.end = OMAP_GPIO_IRQ(OMAP24XX_ETHR_GPIO_IRQ),
.start = OMAP_GPIO_IRQ(SDP2430_ETHR_GPIO_IRQ),
.end = OMAP_GPIO_IRQ(SDP2430_ETHR_GPIO_IRQ),
.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL,
},
};
......@@ -170,13 +173,13 @@ static inline void __init sdp2430_init_smc91x(void)
sdp2430_smc91x_resources[0].end = cs_mem_base + 0x30f;
udelay(100);
if (gpio_request(OMAP24XX_ETHR_GPIO_IRQ, "SMC91x irq") < 0) {
if (gpio_request(SDP2430_ETHR_GPIO_IRQ, "SMC91x irq") < 0) {
printk(KERN_ERR "Failed to request GPIO%d for smc91x IRQ\n",
OMAP24XX_ETHR_GPIO_IRQ);
SDP2430_ETHR_GPIO_IRQ);
gpmc_cs_free(eth_cs);
goto out;
}
gpio_direction_input(OMAP24XX_ETHR_GPIO_IRQ);
gpio_direction_input(SDP2430_ETHR_GPIO_IRQ);
out:
clk_disable(gpmc_fck);
......
/*
* arch/arm/plat-omap/include/mach/board-2430sdp.h
*
* Hardware definitions for TI OMAP2430 SDP board.
*
* Based on board-h4.h by Dirk Behme <dirk.behme@de.bosch.com>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*
* THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
* WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
* MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
* NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
* USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
* ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
* You should have received a copy of the GNU General Public License along
* with this program; if not, write to the Free Software Foundation, Inc.,
* 675 Mass Ave, Cambridge, MA 02139, USA.
*/
#ifndef __ASM_ARCH_OMAP_2430SDP_H
#define __ASM_ARCH_OMAP_2430SDP_H
/* Placeholder for 2430SDP specific defines */
#define OMAP24XX_ETHR_START 0x08000300
#define OMAP24XX_ETHR_GPIO_IRQ 149
#define SDP2430_CS0_BASE 0x04000000
/* Function prototypes */
extern void sdp2430_flash_init(void);
extern void sdp2430_usb_init(void);
#endif /* __ASM_ARCH_OMAP_2430SDP_H */
......@@ -298,10 +298,6 @@
#include "board-h4.h"
#endif
#ifdef CONFIG_MACH_OMAP_2430SDP
#include "board-2430sdp.h"
#endif
#ifdef CONFIG_MACH_OMAP3_BEAGLE
#include "board-omap3beagle.h"
#endif
......
Markdown is supported
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment