Commit a336ca7c authored by Yaniv Rosner's avatar Yaniv Rosner Committed by David S. Miller
Browse files

bnx2x: Fix rare self-test failures



On rare occasions, self test link may fail since the link is
being sampled while it's still being stabilized.
To correct this behaviour, try to sample the link for 2 seconds
prior to declaring a failure.
Signed-off-by: default avatarYaniv Rosner <yanivr@broadcom.com>
Signed-off-by: default avatarYuval Mintz <yuvalmin@broadcom.com>
Signed-off-by: default avatarAriel Elior <ariele@broadcom.com>
Signed-off-by: default avatarEilon Greenstein <eilong@broadcom.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parent f72839d0
......@@ -2379,8 +2379,8 @@ static void bnx2x_self_test(struct net_device *dev,
struct ethtool_test *etest, u64 *buf)
{
struct bnx2x *bp = netdev_priv(dev);
u8 is_serdes;
int rc;
u8 is_serdes, link_up;
int rc, cnt = 0;
if (bp->recovery_state != BNX2X_RECOVERY_DONE) {
netdev_err(bp->dev,
......@@ -2402,20 +2402,17 @@ static void bnx2x_self_test(struct net_device *dev,
}
is_serdes = (bp->link_vars.link_status & LINK_STATUS_SERDES_LINK) > 0;
link_up = bp->link_vars.link_up;
/* offline tests are not supported in MF mode */
if ((etest->flags & ETH_TEST_FL_OFFLINE) && !IS_MF(bp)) {
int port = BP_PORT(bp);
u32 val;
u8 link_up;
/* save current value of input enable for TX port IF */
val = REG_RD(bp, NIG_REG_EGRESS_UMP0_IN_EN + port*4);
/* disable input for TX port IF */
REG_WR(bp, NIG_REG_EGRESS_UMP0_IN_EN + port*4, 0);
link_up = bp->link_vars.link_up;
bnx2x_nic_unload(bp, UNLOAD_NORMAL, false);
rc = bnx2x_nic_load(bp, LOAD_DIAG);
if (rc) {
......@@ -2477,7 +2474,13 @@ static void bnx2x_self_test(struct net_device *dev,
etest->flags |= ETH_TEST_FL_FAILED;
}
if (bnx2x_link_test(bp, is_serdes) != 0) {
if (link_up) {
cnt = 100;
while (bnx2x_link_test(bp, is_serdes) && --cnt)
msleep(20);
}
if (!cnt) {
if (!IS_MF(bp))
buf[6] = 1;
else
......
Supports Markdown
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment