Commit a28c9852 authored by H Hartley Sweeten's avatar H Hartley Sweeten Committed by Greg Kroah-Hartman
Browse files

staging: comedi: adl_pci6208: cleanup pci6208_pci_setup()



The "local configuration register" stuff is not required. The
io base/range are only queried for use in a kernel message
that it just added noise. Similar with the io range for the
actual io base used by the driver.

Remove both printk's and all the unnecessary code.
Signed-off-by: default avatarH Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
parent 7b6afad1
......@@ -229,7 +229,7 @@ static int
pci6208_pci_setup(struct pci_dev *pci_dev, unsigned long *io_base_ptr,
int dev_minor)
{
unsigned long io_base, io_range, lcr_io_base, lcr_io_range;
unsigned long io_base;
/* Enable PCI device and request regions */
if (comedi_pci_enable(pci_dev, "adl_pci6208") < 0) {
......@@ -238,28 +238,11 @@ pci6208_pci_setup(struct pci_dev *pci_dev, unsigned long *io_base_ptr,
dev_minor);
return -EIO;
}
/* Read local configuration register
* base address [PCI_BASE_ADDRESS #1].
*/
lcr_io_base = pci_resource_start(pci_dev, 1);
lcr_io_range = pci_resource_len(pci_dev, 1);
printk(KERN_INFO "comedi%d: local config registers at address"
" 0x%4lx [0x%4lx]\n",
dev_minor, lcr_io_base, lcr_io_range);
/* Read PCI6208 register base address [PCI_BASE_ADDRESS #2]. */
io_base = pci_resource_start(pci_dev, 2);
io_range = pci_resource_end(pci_dev, 2) - io_base + 1;
printk("comedi%d: 6208 registers at address 0x%4lx [0x%4lx]\n",
dev_minor, io_base, io_range);
*io_base_ptr = io_base;
/* devpriv->io_range = io_range; */
/* devpriv->is_valid=0; */
/* devpriv->lcr_io_base=lcr_io_base; */
/* devpriv->lcr_io_range=lcr_io_range; */
return 0;
}
......
Supports Markdown
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment