Commit a144a563 authored by Russell King's avatar Russell King Committed by Russell King
Browse files

Merge omap tree

* master.kernel.org:/pub/scm/linux/kernel/git/tmlind/linux-omap-upstream: (26 commits)
  ARM: OMAP: Multiplexing for 24xx GPMC wait pin monitoring
  ARM: OMAP: Fix SRAM to use MT_MEMORY instead of MT_DEVICE
  ARM: OMAP: Update dmtimers
  ARM: OMAP: Make clock variables static
  ARM: OMAP: Fix GPMC compilation when DEBUG is defined
  ARM: OMAP: Mux updates for external DMA and GPIO
  ARM: OMAP: Add OMAP_TAG_CAMERA_SENSOR
  ARM: OMAP: Add initial 24xx suspend support
  ARM: OMAP: Update cpufreq support for 24xx
  ARM: OMAP: Add GPMC support for OMAP2
  ARM: OMAP: Fix DMA channel irq handling for omap24xx
  ARM: OMAP: OMAP2 DMA burst support
  ARM: OMAP: Fix 32 kHz timer and modify GP timer to use GPT1
  ARM: OMAP: Port dmtimers to OMAP2 and implement PWM support
  ARM: OMAP: Correct two bugs in arch/arm/mach-omap2/clock.c
  ARM: OMAP: Register the 24xx McSPI device
  ARM: OMAP: Add bitbank SPI driver for Innovator 1510 touchscreen
  ARM: OMAP: Aic23 alsa platform driver code for board-innovator
  ARM: OMAP: Fix GPIO IRQ mask handling
  ARM: OMAP: DMA transfer parameter configuration fix
  ...
parents 8fc5ffa0 3cbc9605
......@@ -678,7 +678,7 @@ config XIP_PHYS_ADDR
endmenu
if (ARCH_SA1100 || ARCH_INTEGRATOR || ARCH_OMAP1)
if (ARCH_SA1100 || ARCH_INTEGRATOR || ARCH_OMAP)
menu "CPU Frequency scaling"
......
......@@ -62,6 +62,13 @@ config MACH_OMAP_PERSEUS2
Support for TI OMAP 730 Perseus2 board. Say Y here if you have such
a board.
config MACH_OMAP_FSAMPLE
bool "TI F-Sample"
depends on ARCH_OMAP1 && ARCH_OMAP730
help
Support for TI OMAP 850 F-Sample board. Say Y here if you have such
a board.
config MACH_VOICEBLUE
bool "Voiceblue"
depends on ARCH_OMAP1 && ARCH_OMAP15XX
......
......@@ -17,6 +17,7 @@ obj-$(CONFIG_MACH_OMAP_H2) += board-h2.o
obj-$(CONFIG_MACH_OMAP_INNOVATOR) += board-innovator.o
obj-$(CONFIG_MACH_OMAP_GENERIC) += board-generic.o
obj-$(CONFIG_MACH_OMAP_PERSEUS2) += board-perseus2.o
obj-$(CONFIG_MACH_OMAP_FSAMPLE) += board-fsample.o
obj-$(CONFIG_MACH_OMAP_OSK) += board-osk.o
obj-$(CONFIG_MACH_OMAP_H3) += board-h3.o
obj-$(CONFIG_MACH_VOICEBLUE) += board-voiceblue.o
......
......@@ -80,8 +80,15 @@ static struct omap_uart_config ams_delta_uart_config __initdata = {
.enabled_uarts = 1,
};
static struct omap_usb_config ams_delta_usb_config __initdata = {
.register_host = 1,
.hmc_mode = 16,
.pins[0] = 2,
};
static struct omap_board_config_kernel ams_delta_config[] = {
{ OMAP_TAG_UART, &ams_delta_uart_config },
{ OMAP_TAG_USB, &ams_delta_usb_config },
};
static struct platform_device ams_delta_led_device = {
......
/*
* linux/arch/arm/mach-omap1/board-fsample.c
*
* Modified from board-perseus2.c
*
* Original OMAP730 support by Jean Pihet <j-pihet@ti.com>
* Updated for 2.6 by Kevin Hilman <kjh@hilman.org>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/delay.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/nand.h>
#include <linux/mtd/partitions.h>
#include <linux/input.h>
#include <asm/hardware.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/flash.h>
#include <asm/mach/map.h>
#include <asm/arch/tc.h>
#include <asm/arch/gpio.h>
#include <asm/arch/mux.h>
#include <asm/arch/fpga.h>
#include <asm/arch/keypad.h>
#include <asm/arch/common.h>
#include <asm/arch/board.h>
#include <asm/arch/board-fsample.h>
static int fsample_keymap[] = {
KEY(0,0,KEY_UP),
KEY(0,1,KEY_RIGHT),
KEY(0,2,KEY_LEFT),
KEY(0,3,KEY_DOWN),
KEY(0,4,KEY_CENTER),
KEY(0,5,KEY_0_5),
KEY(1,0,KEY_SOFT2),
KEY(1,1,KEY_SEND),
KEY(1,2,KEY_END),
KEY(1,3,KEY_VOLUMEDOWN),
KEY(1,4,KEY_VOLUMEUP),
KEY(1,5,KEY_RECORD),
KEY(2,0,KEY_SOFT1),
KEY(2,1,KEY_3),
KEY(2,2,KEY_6),
KEY(2,3,KEY_9),
KEY(2,4,KEY_SHARP),
KEY(2,5,KEY_2_5),
KEY(3,0,KEY_BACK),
KEY(3,1,KEY_2),
KEY(3,2,KEY_5),
KEY(3,3,KEY_8),
KEY(3,4,KEY_0),
KEY(3,5,KEY_HEADSETHOOK),
KEY(4,0,KEY_HOME),
KEY(4,1,KEY_1),
KEY(4,2,KEY_4),
KEY(4,3,KEY_7),
KEY(4,4,KEY_STAR),
KEY(4,5,KEY_POWER),
0
};
static struct resource smc91x_resources[] = {
[0] = {
.start = H2P2_DBG_FPGA_ETHR_START, /* Physical */
.end = H2P2_DBG_FPGA_ETHR_START + 0xf,
.flags = IORESOURCE_MEM,
},
[1] = {
.start = INT_730_MPU_EXT_NIRQ,
.end = 0,
.flags = IORESOURCE_IRQ,
},
};
static struct mtd_partition nor_partitions[] = {
/* bootloader (U-Boot, etc) in first sector */
{
.name = "bootloader",
.offset = 0,
.size = SZ_128K,
.mask_flags = MTD_WRITEABLE, /* force read-only */
},
/* bootloader params in the next sector */
{
.name = "params",
.offset = MTDPART_OFS_APPEND,
.size = SZ_128K,
.mask_flags = 0,
},
/* kernel */
{
.name = "kernel",
.offset = MTDPART_OFS_APPEND,
.size = SZ_2M,
.mask_flags = 0
},
/* rest of flash is a file system */
{
.name = "rootfs",
.offset = MTDPART_OFS_APPEND,
.size = MTDPART_SIZ_FULL,
.mask_flags = 0
},
};
static struct flash_platform_data nor_data = {
.map_name = "cfi_probe",
.width = 2,
.parts = nor_partitions,
.nr_parts = ARRAY_SIZE(nor_partitions),
};
static struct resource nor_resource = {
.start = OMAP_CS0_PHYS,
.end = OMAP_CS0_PHYS + SZ_32M - 1,
.flags = IORESOURCE_MEM,
};
static struct platform_device nor_device = {
.name = "omapflash",
.id = 0,
.dev = {
.platform_data = &nor_data,
},
.num_resources = 1,
.resource = &nor_resource,
};
static struct nand_platform_data nand_data = {
.options = NAND_SAMSUNG_LP_OPTIONS,
};
static struct resource nand_resource = {
.start = OMAP_CS3_PHYS,
.end = OMAP_CS3_PHYS + SZ_4K - 1,
.flags = IORESOURCE_MEM,
};
static struct platform_device nand_device = {
.name = "omapnand",
.id = 0,
.dev = {
.platform_data = &nand_data,
},
.num_resources = 1,
.resource = &nand_resource,
};
static struct platform_device smc91x_device = {
.name = "smc91x",
.id = 0,
.num_resources = ARRAY_SIZE(smc91x_resources),
.resource = smc91x_resources,
};
static struct resource kp_resources[] = {
[0] = {
.start = INT_730_MPUIO_KEYPAD,
.end = INT_730_MPUIO_KEYPAD,
.flags = IORESOURCE_IRQ,
},
};
static struct omap_kp_platform_data kp_data = {
.rows = 8,
.cols = 8,
.keymap = fsample_keymap,
};
static struct platform_device kp_device = {
.name = "omap-keypad",
.id = -1,
.dev = {
.platform_data = &kp_data,
},
.num_resources = ARRAY_SIZE(kp_resources),
.resource = kp_resources,
};
static struct platform_device lcd_device = {
.name = "lcd_p2",
.id = -1,
};
static struct platform_device *devices[] __initdata = {
&nor_device,
&nand_device,
&smc91x_device,
&kp_device,
&lcd_device,
};
#define P2_NAND_RB_GPIO_PIN 62
static int nand_dev_ready(struct nand_platform_data *data)
{
return omap_get_gpio_datain(P2_NAND_RB_GPIO_PIN);
}
static struct omap_uart_config fsample_uart_config __initdata = {
.enabled_uarts = ((1 << 0) | (1 << 1)),
};
static struct omap_lcd_config fsample_lcd_config __initdata = {
.ctrl_name = "internal",
};
static struct omap_board_config_kernel fsample_config[] = {
{ OMAP_TAG_UART, &fsample_uart_config },
{ OMAP_TAG_LCD, &fsample_lcd_config },
};
static void __init omap_fsample_init(void)
{
if (!(omap_request_gpio(P2_NAND_RB_GPIO_PIN)))
nand_data.dev_ready = nand_dev_ready;
omap_cfg_reg(L3_1610_FLASH_CS2B_OE);
omap_cfg_reg(M8_1610_FLASH_CS2B_WE);
platform_add_devices(devices, ARRAY_SIZE(devices));
omap_board_config = fsample_config;
omap_board_config_size = ARRAY_SIZE(fsample_config);
omap_serial_init();
}
static void __init fsample_init_smc91x(void)
{
fpga_write(1, H2P2_DBG_FPGA_LAN_RESET);
mdelay(50);
fpga_write(fpga_read(H2P2_DBG_FPGA_LAN_RESET) & ~1,
H2P2_DBG_FPGA_LAN_RESET);
mdelay(50);
}
void omap_fsample_init_irq(void)
{
omap1_init_common_hw();
omap_init_irq();
omap_gpio_init();
fsample_init_smc91x();
}
/* Only FPGA needs to be mapped here. All others are done with ioremap */
static struct map_desc omap_fsample_io_desc[] __initdata = {
{
.virtual = H2P2_DBG_FPGA_BASE,
.pfn = __phys_to_pfn(H2P2_DBG_FPGA_START),
.length = H2P2_DBG_FPGA_SIZE,
.type = MT_DEVICE
},
{
.virtual = FSAMPLE_CPLD_BASE,
.pfn = __phys_to_pfn(FSAMPLE_CPLD_START),
.length = FSAMPLE_CPLD_SIZE,
.type = MT_DEVICE
}
};
static void __init omap_fsample_map_io(void)
{
omap1_map_common_io();
iotable_init(omap_fsample_io_desc,
ARRAY_SIZE(omap_fsample_io_desc));
/* Early, board-dependent init */
/*
* Hold GSM Reset until needed
*/
omap_writew(omap_readw(OMAP730_DSP_M_CTL) & ~1, OMAP730_DSP_M_CTL);
/*
* UARTs -> done automagically by 8250 driver
*/
/*
* CSx timings, GPIO Mux ... setup
*/
/* Flash: CS0 timings setup */
omap_writel(0x0000fff3, OMAP730_FLASH_CFG_0);
omap_writel(0x00000088, OMAP730_FLASH_ACFG_0);
/*
* Ethernet support through the debug board
* CS1 timings setup
*/
omap_writel(0x0000fff3, OMAP730_FLASH_CFG_1);
omap_writel(0x00000000, OMAP730_FLASH_ACFG_1);
/*
* Configure MPU_EXT_NIRQ IO in IO_CONF9 register,
* It is used as the Ethernet controller interrupt
*/
omap_writel(omap_readl(OMAP730_IO_CONF_9) & 0x1FFFFFFF, OMAP730_IO_CONF_9);
}
MACHINE_START(OMAP_FSAMPLE, "OMAP730 F-Sample")
/* Maintainer: Brian Swetland <swetland@google.com> */
.phys_io = 0xfff00000,
.io_pg_offst = ((0xfef00000) >> 18) & 0xfffc,
.boot_params = 0x10000100,
.map_io = omap_fsample_map_io,
.init_irq = omap_fsample_init_irq,
.init_machine = omap_fsample_init,
.timer = &omap_timer,
MACHINE_END
......@@ -37,6 +37,8 @@
#include <asm/arch/usb.h>
#include <asm/arch/keypad.h>
#include <asm/arch/common.h>
#include <asm/arch/mcbsp.h>
#include <asm/arch/omap-alsa.h>
static int innovator_keymap[] = {
KEY(0, 0, KEY_F1),
......@@ -112,6 +114,42 @@ static struct platform_device innovator_flash_device = {
.resource = &innovator_flash_resource,
};
#define DEFAULT_BITPERSAMPLE 16
static struct omap_mcbsp_reg_cfg mcbsp_regs = {
.spcr2 = FREE | FRST | GRST | XRST | XINTM(3),
.spcr1 = RINTM(3) | RRST,
.rcr2 = RPHASE | RFRLEN2(OMAP_MCBSP_WORD_8) |
RWDLEN2(OMAP_MCBSP_WORD_16) | RDATDLY(0),
.rcr1 = RFRLEN1(OMAP_MCBSP_WORD_8) | RWDLEN1(OMAP_MCBSP_WORD_16),
.xcr2 = XPHASE | XFRLEN2(OMAP_MCBSP_WORD_8) |
XWDLEN2(OMAP_MCBSP_WORD_16) | XDATDLY(0) | XFIG,
.xcr1 = XFRLEN1(OMAP_MCBSP_WORD_8) | XWDLEN1(OMAP_MCBSP_WORD_16),
.srgr1 = FWID(DEFAULT_BITPERSAMPLE - 1),
.srgr2 = GSYNC | CLKSP | FSGM | FPER(DEFAULT_BITPERSAMPLE * 2 - 1),
/*.pcr0 = FSXM | FSRM | CLKXM | CLKRM | CLKXP | CLKRP,*/ /* mcbsp: master */
.pcr0 = CLKXP | CLKRP, /* mcbsp: slave */
};
static struct omap_alsa_codec_config alsa_config = {
.name = "OMAP Innovator AIC23",
.mcbsp_regs_alsa = &mcbsp_regs,
.codec_configure_dev = NULL, // aic23_configure,
.codec_set_samplerate = NULL, // aic23_set_samplerate,
.codec_clock_setup = NULL, // aic23_clock_setup,
.codec_clock_on = NULL, // aic23_clock_on,
.codec_clock_off = NULL, // aic23_clock_off,
.get_default_samplerate = NULL, // aic23_get_default_samplerate,
};
static struct platform_device innovator_mcbsp1_device = {
.name = "omap_alsa_mcbsp",
.id = 1,
.dev = {
.platform_data = &alsa_config,
},
};
static struct resource innovator_kp_resources[] = {
[0] = {
.start = INT_KEYBOARD,
......@@ -139,6 +177,10 @@ static struct platform_device innovator_kp_device = {
#ifdef CONFIG_ARCH_OMAP15XX
#include <linux/spi/spi.h>
#include <linux/spi/ads7846.h>
/* Only FPGA needs to be mapped here. All others are done with ioremap */
static struct map_desc innovator1510_io_desc[] __initdata = {
{
......@@ -174,13 +216,44 @@ static struct platform_device innovator1510_lcd_device = {
.id = -1,
};
static struct platform_device innovator1510_spi_device = {
.name = "spi_inn1510",
.id = -1,
};
static struct platform_device *innovator1510_devices[] __initdata = {
&innovator_flash_device,
&innovator1510_smc91x_device,
&innovator_mcbsp1_device,
&innovator_kp_device,
&innovator1510_lcd_device,
&innovator1510_spi_device,
};
static int innovator_get_pendown_state(void)
{
return !(fpga_read(OMAP1510_FPGA_TOUCHSCREEN) & (1 << 5));
}
static const struct ads7846_platform_data innovator1510_ts_info = {
.model = 7846,
.vref_delay_usecs = 100, /* internal, no capacitor */
.x_plate_ohms = 419,
.y_plate_ohms = 486,
.get_pendown_state = innovator_get_pendown_state,
};
static struct spi_board_info __initdata innovator1510_boardinfo[] = { {
/* FPGA (bus "10") CS0 has an ads7846e */
.modalias = "ads7846",
.platform_data = &innovator1510_ts_info,
.irq = OMAP1510_INT_FPGA_TS,
.max_speed_hz = 120000 /* max sample rate at 3V */
* 26 /* command + data + overhead */,
.bus_num = 10,
.chip_select = 0,
} };
#endif /* CONFIG_ARCH_OMAP15XX */
#ifdef CONFIG_ARCH_OMAP16XX
......@@ -311,6 +384,8 @@ static void __init innovator_init(void)
#ifdef CONFIG_ARCH_OMAP15XX
if (cpu_is_omap1510()) {
platform_add_devices(innovator1510_devices, ARRAY_SIZE(innovator1510_devices));
spi_register_board_info(innovator1510_boardinfo,
ARRAY_SIZE(innovator1510_boardinfo));
}
#endif
#ifdef CONFIG_ARCH_OMAP16XX
......
......@@ -33,7 +33,6 @@
#include <linux/mtd/mtd.h>
#include <linux/mtd/partitions.h>
#include <linux/input.h>
#include <asm/hardware.h>
#include <asm/mach-types.h>
......@@ -45,25 +44,10 @@
#include <asm/arch/usb.h>
#include <asm/arch/mux.h>
#include <asm/arch/tc.h>
#include <asm/arch/keypad.h>
#include <asm/arch/common.h>
#include <asm/arch/mcbsp.h>
#include <asm/arch/omap-alsa.h>
static int osk_keymap[] = {
KEY(0, 0, KEY_F1),
KEY(0, 3, KEY_UP),
KEY(1, 1, KEY_LEFTCTRL),
KEY(1, 2, KEY_LEFT),
KEY(2, 0, KEY_SPACE),
KEY(2, 1, KEY_ESC),
KEY(2, 2, KEY_DOWN),
KEY(3, 2, KEY_ENTER),
KEY(3, 3, KEY_RIGHT),
0
};
static struct mtd_partition osk_partitions[] = {
/* bootloader (U-Boot, etc) in first sector */
{
......@@ -181,48 +165,17 @@ static struct omap_alsa_codec_config alsa_config = {
static struct platform_device osk5912_mcbsp1_device = {
.name = "omap_alsa_mcbsp",
.id = 1,
.id = 1,
.dev = {
.platform_data = &alsa_config,
},
};
static struct resource osk5912_kp_resources[] = {
[0] = {
.start = INT_KEYBOARD,
.end = INT_KEYBOARD,
.flags = IORESOURCE_IRQ,
},
};
static struct omap_kp_platform_data osk_kp_data = {
.rows = 8,
.cols = 8,
.keymap = osk_keymap,
};
static struct platform_device osk5912_kp_device = {
.name = "omap-keypad",
.id = -1,
.dev = {
.platform_data = &osk_kp_data,
},
.num_resources = ARRAY_SIZE(osk5912_kp_resources),
.resource = osk5912_kp_resources,
};
static struct platform_device osk5912_lcd_device = {
.name = "lcd_osk",
.id = -1,
};
static struct platform_device *osk5912_devices[] __initdata = {
&osk5912_flash_device,
&osk5912_smc91x_device,
&osk5912_cf_device,
&osk5912_mcbsp1_device,
&osk5912_kp_device,
&osk5912_lcd_device,
};
static void __init osk_init_smc91x(void)
......@@ -276,18 +229,100 @@ static struct omap_uart_config osk_uart_config __initdata = {
.enabled_uarts = (1 << 0),
};
#ifdef CONFIG_OMAP_OSK_MISTRAL
static struct omap_lcd_config osk_lcd_config __initdata = {
.ctrl_name = "internal",
};
#endif
static struct omap_board_config_kernel osk_config[] = {
{ OMAP_TAG_USB, &osk_usb_config },
{ OMAP_TAG_UART, &osk_uart_config },
#ifdef CONFIG_OMAP_OSK_MISTRAL
{ OMAP_TAG_LCD, &osk_lcd_config },
#endif
};
#ifdef CONFIG_OMAP_OSK_MISTRAL
#include <linux/input.h>
#include <linux/spi/spi.h>
#include <linux/spi/ads7846.h>
#include <asm/arch/keypad.h>
static const int osk_keymap[] = {
/* KEY(col, row, code) */
KEY(0, 0, KEY_F1), /* SW4 */
KEY(0, 3, KEY_UP), /* (sw2/up) */
KEY(1, 1, KEY_LEFTCTRL), /* SW5 */
KEY(1, 2, KEY_LEFT), /* (sw2/left) */
KEY(2, 0, KEY_SPACE), /* SW3 */
KEY(2, 1, KEY_ESC), /* SW6 */
KEY(2, 2, KEY_DOWN), /* (sw2/down) */
KEY(3, 2, KEY_ENTER), /* (sw2/select) */
KEY(3, 3, KEY_RIGHT), /* (sw2/right) */
0
};
static struct omap_kp_platform_data osk_kp_data = {
.rows = 8,
.cols = 8,
.keymap = (int *) osk_keymap,
};