Commit 9fa465c0 authored by Sathya Perla's avatar Sathya Perla Committed by David S. Miller
Browse files

be2net: remove code duplication relating to Lancer reset sequence



The steps needed for Lancer's reset/initialization sequence are:
	a) wait for SLIPORT_STAUS RDY bit to be set
	b) set the SLIPORT_CONTROL IP bit
	c) repeat step "a"

The code needed for this sequence is already covered by the be_func_init()
routine (with minor modifications.) So, get rid of the
lancer_test_and_set_rdy_state() and lancer_provisioning_error() routines
that unnecessarily duplicate this code. Also fixed the error recovery
function to take care of these changes
Signed-off-by: default avatarSathya Perla <sathya.perla@emulex.com>
Signed-off-by: default avatarKalesh AP <kalesh.purayil@emulex.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parent d0e1b319
......@@ -635,73 +635,16 @@ static int lancer_wait_ready(struct be_adapter *adapter)
for (i = 0; i < SLIPORT_READY_TIMEOUT; i++) {
sliport_status = ioread32(adapter->db + SLIPORT_STATUS_OFFSET);
if (sliport_status & SLIPORT_STATUS_RDY_MASK)
break;
msleep(1000);
}
if (i == SLIPORT_READY_TIMEOUT)
return sliport_status ? : -1;
return 0;
}
static bool lancer_provisioning_error(struct be_adapter *adapter)
{
u32 sliport_status = 0, sliport_err1 = 0, sliport_err2 = 0;
sliport_status = ioread32(adapter->db + SLIPORT_STATUS_OFFSET);
if (sliport_status & SLIPORT_STATUS_ERR_MASK) {
sliport_err1 = ioread32(adapter->db + SLIPORT_ERROR1_OFFSET);
sliport_err2 = ioread32(adapter->db + SLIPORT_ERROR2_OFFSET);
if (sliport_err1 == SLIPORT_ERROR_NO_RESOURCE1 &&
sliport_err2 == SLIPORT_ERROR_NO_RESOURCE2)
return true;
}
return false;
}
int lancer_test_and_set_rdy_state(struct be_adapter *adapter)
{
int status;
u32 sliport_status, err, reset_needed;
bool resource_error;
return 0;
resource_error = lancer_provisioning_error(adapter);
if (resource_error)
return -EAGAIN;
if (sliport_status & SLIPORT_STATUS_ERR_MASK &&
!(sliport_status & SLIPORT_STATUS_RN_MASK))
return -EIO;
status = lancer_wait_ready(adapter);
if (!status) {
sliport_status = ioread32(adapter->db + SLIPORT_STATUS_OFFSET);
err = sliport_status & SLIPORT_STATUS_ERR_MASK;
reset_needed = sliport_status & SLIPORT_STATUS_RN_MASK;
if (err && reset_needed) {
iowrite32(SLI_PORT_CONTROL_IP_MASK,
adapter->db + SLIPORT_CONTROL_OFFSET);
/* check if adapter has corrected the error */
status = lancer_wait_ready(adapter);
sliport_status = ioread32(adapter->db +
SLIPORT_STATUS_OFFSET);
sliport_status &= (SLIPORT_STATUS_ERR_MASK |
SLIPORT_STATUS_RN_MASK);
if (status || sliport_status)
status = -1;
} else if (err || reset_needed) {
status = -1;
}
msleep(1000);
}
/* Stop error recovery if error is not recoverable.
* No resource error is temporary errors and will go away
* when PF provisions resources.
*/
resource_error = lancer_provisioning_error(adapter);
if (resource_error)
status = -EAGAIN;
return status;
return sliport_status ? : -1;
}
int be_fw_wait_ready(struct be_adapter *adapter)
......@@ -738,7 +681,7 @@ int be_fw_wait_ready(struct be_adapter *adapter)
err:
dev_err(dev, "POST timeout; stage=%#x\n", stage);
return -1;
return -ETIMEDOUT;
}
static inline struct be_sge *nonembedded_sgl(struct be_mcc_wrb *wrb)
......@@ -2130,16 +2073,12 @@ int be_cmd_reset_function(struct be_adapter *adapter)
int status;
if (lancer_chip(adapter)) {
iowrite32(SLI_PORT_CONTROL_IP_MASK,
adapter->db + SLIPORT_CONTROL_OFFSET);
status = lancer_wait_ready(adapter);
if (!status) {
iowrite32(SLI_PORT_CONTROL_IP_MASK,
adapter->db + SLIPORT_CONTROL_OFFSET);
status = lancer_test_and_set_rdy_state(adapter);
}
if (status) {
if (status)
dev_err(&adapter->pdev->dev,
"Adapter in non recoverable error\n");
}
return status;
}
......
......@@ -4903,18 +4903,54 @@ static void be_netdev_init(struct net_device *netdev)
netdev->ethtool_ops = &be_ethtool_ops;
}
/* If any VFs are already enabled don't FLR the PF */
static bool be_reset_required(struct be_adapter *adapter)
{
return pci_num_vf(adapter->pdev) ? false : true;
}
/* Wait for the FW to be ready and perform the required initialization */
static int be_func_init(struct be_adapter *adapter)
{
int status;
status = be_fw_wait_ready(adapter);
if (status)
return status;
if (be_reset_required(adapter)) {
status = be_cmd_reset_function(adapter);
if (status)
return status;
/* Wait for interrupts to quiesce after an FLR */
msleep(100);
/* We can clear all errors when function reset succeeds */
be_clear_all_error(adapter);
}
/* Tell FW we're ready to fire cmds */
status = be_cmd_fw_init(adapter);
if (status)
return status;
/* Allow interrupts for other ULPs running on NIC function */
be_intr_set(adapter, true);
return 0;
}
static int be_err_recover(struct be_adapter *adapter)
{
struct net_device *netdev = adapter->netdev;
struct device *dev = &adapter->pdev->dev;
int status;
status = lancer_test_and_set_rdy_state(adapter);
status = be_func_init(adapter);
if (status)
goto err;
be_clear_all_error(adapter);
status = be_setup(adapter);
if (status)
goto err;
......@@ -4927,13 +4963,13 @@ static int be_err_recover(struct be_adapter *adapter)
netif_device_attach(netdev);
dev_err(dev, "Adapter recovery successful\n");
dev_info(dev, "Adapter recovery successful\n");
return 0;
err:
if (status == -EAGAIN)
dev_err(dev, "Waiting for resource provisioning\n");
else
if (be_physfn(adapter))
dev_err(dev, "Adapter recovery failed\n");
else
dev_err(dev, "Re-trying adapter recovery\n");
return status;
}
......@@ -4962,10 +4998,8 @@ static void be_err_detection_task(struct work_struct *work)
status = be_err_recover(adapter);
}
/* In Lancer, for all errors other than provisioning error (-EAGAIN),
* no need to attempt further recovery.
*/
if (!status || status == -EAGAIN)
/* Always attempt recovery on VFs */
if (!status || be_virtfn(adapter))
be_schedule_err_detection(adapter);
}
......@@ -5208,12 +5242,6 @@ static void be_remove(struct pci_dev *pdev)
free_netdev(adapter->netdev);
}
/* If any VFs are already enabled don't FLR the PF */
static bool be_reset_required(struct be_adapter *adapter)
{
return pci_num_vf(adapter->pdev) ? false : true;
}
static char *mc_name(struct be_adapter *adapter)
{
char *str = ""; /* default */
......@@ -5269,35 +5297,6 @@ static inline char *nic_name(struct pci_dev *pdev)
}
}
/* Wait for the FW to be ready and perform the required initialization */
static int be_func_init(struct be_adapter *adapter)
{
int status;
status = be_fw_wait_ready(adapter);
if (status)
return status;
if (be_reset_required(adapter)) {
status = be_cmd_reset_function(adapter);
if (status)
return status;
/* Wait for interrupts to quiesce after an FLR */
msleep(100);
}
/* Tell FW we're ready to fire cmds */
status = be_cmd_fw_init(adapter);
if (status)
return status;
/* Allow interrupts for other ULPs running on NIC function */
be_intr_set(adapter, true);
return 0;
}
static int be_probe(struct pci_dev *pdev, const struct pci_device_id *pdev_id)
{
struct be_adapter *adapter;
......
Markdown is supported
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment