Commit 9b383672 authored by Hauke Mehrtens's avatar Hauke Mehrtens Committed by John W. Linville

b43: use bcma_pmu_spuravoid_pllupdate()

Do not implement this in b43, but use bcma_pmu_spuravoid_pllupdate().
Signed-off-by: default avatarHauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: default avatarJohn W. Linville <linville@tuxdriver.com>
parent cc5569f6
......@@ -5100,63 +5100,11 @@ static void b43_chantab_phy_upload(struct b43_wldev *dev,
/* http://bcm-v4.sipsolutions.net/802.11/PmuSpurAvoid */
static void b43_nphy_pmu_spur_avoid(struct b43_wldev *dev, bool avoid)
{
struct bcma_drv_cc __maybe_unused *cc;
u32 __maybe_unused pmu_ctl;
switch (dev->dev->bus_type) {
#ifdef CONFIG_B43_BCMA
case B43_BUS_BCMA:
cc = &dev->dev->bdev->bus->drv_cc;
if (dev->dev->chip_id == 43224 || dev->dev->chip_id == 43225) {
if (avoid) {
bcma_chipco_pll_write(cc, 0x0, 0x11500010);
bcma_chipco_pll_write(cc, 0x1, 0x000C0C06);
bcma_chipco_pll_write(cc, 0x2, 0x0F600a08);
bcma_chipco_pll_write(cc, 0x3, 0x00000000);
bcma_chipco_pll_write(cc, 0x4, 0x2001E920);
bcma_chipco_pll_write(cc, 0x5, 0x88888815);
} else {
bcma_chipco_pll_write(cc, 0x0, 0x11100010);
bcma_chipco_pll_write(cc, 0x1, 0x000c0c06);
bcma_chipco_pll_write(cc, 0x2, 0x03000a08);
bcma_chipco_pll_write(cc, 0x3, 0x00000000);
bcma_chipco_pll_write(cc, 0x4, 0x200005c0);
bcma_chipco_pll_write(cc, 0x5, 0x88888815);
}
pmu_ctl = BCMA_CC_PMU_CTL_PLL_UPD;
} else if (dev->dev->chip_id == 0x4716) {
if (avoid) {
bcma_chipco_pll_write(cc, 0x0, 0x11500060);
bcma_chipco_pll_write(cc, 0x1, 0x080C0C06);
bcma_chipco_pll_write(cc, 0x2, 0x0F600000);
bcma_chipco_pll_write(cc, 0x3, 0x00000000);
bcma_chipco_pll_write(cc, 0x4, 0x2001E924);
bcma_chipco_pll_write(cc, 0x5, 0x88888815);
} else {
bcma_chipco_pll_write(cc, 0x0, 0x11100060);
bcma_chipco_pll_write(cc, 0x1, 0x080c0c06);
bcma_chipco_pll_write(cc, 0x2, 0x03000000);
bcma_chipco_pll_write(cc, 0x3, 0x00000000);
bcma_chipco_pll_write(cc, 0x4, 0x200005c0);
bcma_chipco_pll_write(cc, 0x5, 0x88888815);
}
pmu_ctl = BCMA_CC_PMU_CTL_PLL_UPD |
BCMA_CC_PMU_CTL_NOILPONW;
} else if (dev->dev->chip_id == 0x4322 ||
dev->dev->chip_id == 0x4340 ||
dev->dev->chip_id == 0x4341) {
bcma_chipco_pll_write(cc, 0x0, 0x11100070);
bcma_chipco_pll_write(cc, 0x1, 0x1014140a);
bcma_chipco_pll_write(cc, 0x5, 0x88888854);
if (avoid)
bcma_chipco_pll_write(cc, 0x2, 0x05201828);
else
bcma_chipco_pll_write(cc, 0x2, 0x05001828);
pmu_ctl = BCMA_CC_PMU_CTL_PLL_UPD;
} else {
return;
}
bcma_cc_set32(cc, BCMA_CC_PMU_CTL, pmu_ctl);
bcma_pmu_spuravoid_pllupdate(&dev->dev->bdev->bus->drv_cc,
avoid);
break;
#endif
#ifdef CONFIG_B43_SSB
......
Markdown is supported
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment