Commit 997d74b1 authored by Sascha Hauer's avatar Sascha Hauer
Browse files

MXC iomux-v3: Fix defines for PAD_CTL registers



The old defines leaked in from an old version of the patch.
Change the defines to match the register layout of the iomuxer.
Signed-off-by: default avatarSascha Hauer <s.hauer@pengutronix.de>
parent c5aa0ad0
......@@ -68,28 +68,24 @@ struct pad_desc {
/*
* Use to set PAD control
*/
#define PAD_CTL_DRIVE_VOLTAGE_3_3_V 0
#define PAD_CTL_DRIVE_VOLTAGE_1_8_V 1
#define PAD_CTL_NO_HYSTERESIS 0
#define PAD_CTL_HYSTERESIS 1
#define PAD_CTL_DVS (1 << 13)
#define PAD_CTL_HYS (1 << 8)
#define PAD_CTL_PULL_DISABLED 0x0
#define PAD_CTL_PULL_KEEPER 0xa
#define PAD_CTL_PULL_DOWN_100K 0xc
#define PAD_CTL_PULL_UP_47K 0xd
#define PAD_CTL_PULL_UP_100K 0xe
#define PAD_CTL_PULL_UP_22K 0xf
#define PAD_CTL_PKE (1 << 7)
#define PAD_CTL_PUE (1 << 6)
#define PAD_CTL_PUS_100K_DOWN (0 << 4)
#define PAD_CTL_PUS_47K_UP (1 << 4)
#define PAD_CTL_PUS_100K_UP (2 << 4)
#define PAD_CTL_PUS_22K_UP (3 << 4)
#define PAD_CTL_OUTPUT_CMOS 0
#define PAD_CTL_OUTPUT_OPEN_DRAIN 1
#define PAD_CTL_ODE (1 << 3)
#define PAD_CTL_DRIVE_STRENGTH_NORM 0
#define PAD_CTL_DRIVE_STRENGTH_HIGH 1
#define PAD_CTL_DRIVE_STRENGTH_MAX 2
#define PAD_CTL_DSE_STANDARD (0 << 1)
#define PAD_CTL_DSE_HIGH (1 << 1)
#define PAD_CTL_DSE_MAX (2 << 1)
#define PAD_CTL_SLEW_RATE_SLOW 0
#define PAD_CTL_SLEW_RATE_FAST 1
#define PAD_CTL_SRE_FAST (1 << 0)
/*
* setups a single pad:
......
Markdown is supported
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment