Commit 98bb7399 authored by Florian Fainelli's avatar Florian Fainelli Committed by David S. Miller
Browse files

net: bcmgenet: correctly resume adapter from Wake-on-LAN

In case we configured the adapter to be a wake up source from
Wake-on-LAN, but we never actually woke up using Wake-on-LAN, we will
leave the adapter in MagicPacket matching mode, which prevents any other
type of packets from reaching the RX engine. Fix this by calling
bcmgenet_power_up() with GENET_POWER_WOL_MAGIC to restore the adapter
configuration in bcmgenet_resume().

The second problem we had was an imbalanced clock disabling in
bcmgenet_wol_resume(), the Wake-on-LAN slow clock is only enabled in
bcmgenet_suspend() if we configured Wake-on-LAN, yet we unconditionally
disabled the clock in bcmgenet_wol_resume().

Fixes: 8c90db72

 ("net: bcmgenet: suspend and resume from Wake-on-LAN")
Signed-off-by: default avatarFlorian Fainelli <>
Signed-off-by: default avatarDavid S. Miller <>
parent c677ba8b
......@@ -1962,7 +1962,8 @@ static void bcmgenet_set_hw_addr(struct bcmgenet_priv *priv,
static int bcmgenet_wol_resume(struct bcmgenet_priv *priv)
/* From WOL-enabled suspend, switch to regular clock */
if (priv->wolopts)
/* Speed settings must be restored */
......@@ -2668,9 +2669,7 @@ static int bcmgenet_resume(struct device *d)
if (ret)
goto out_clk_disable;
if (priv->wolopts)
ret = bcmgenet_wol_resume(priv);
ret = bcmgenet_wol_resume(priv);
if (ret)
goto out_clk_disable;
......@@ -2685,6 +2684,9 @@ static int bcmgenet_resume(struct device *d)
bcmgenet_ext_writel(priv, reg, EXT_EXT_PWR_MGMT);
if (priv->wolopts)
bcmgenet_power_up(priv, GENET_POWER_WOL_MAGIC);
/* Disable RX/TX DMA and flush TX queues */
dma_ctrl = bcmgenet_dma_disable(priv);
Markdown is supported
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment