Commit 98badfd3 authored by Linus Walleij's avatar Linus Walleij Committed by Olof Johansson

ARM: nomadik: move l2x0 setup to device tree

The cache setup magic value in the Nomadik machine is plain wrong,
the correct settings can be done using device tree in accordance
with the settings from ST's own port.
Signed-off-by: default avatarLinus Walleij <linus.walleij@linaro.org>
Signed-off-by: default avatarOlof Johansson <olof@lixom.net>
parent 1cb3375b
......@@ -21,6 +21,13 @@
interrupts = <30>;
cache-unified;
cache-level = <2>;
cache-size = <131072>;
cache-sets = <512>;
cache-line-size = <32>;
/* At full speed latency must be >=2 */
arm,tag-latency = <2>;
arm,data-latency = <2 2>;
arm,dirty-latency = <2>;
};
mtu0: mtu@101e2000 {
......
......@@ -114,9 +114,8 @@ static const char * cpu8815_board_compat[] = {
};
DT_MACHINE_START(NOMADIK_DT, "Nomadik STn8815")
/* At full speed latency must be >=2, so 0x249 in low bits */
.l2c_aux_val = 0x00700249,
.l2c_aux_mask = 0xfe0fefff,
.l2c_aux_val = 0,
.l2c_aux_mask = ~0,
.map_io = cpu8815_map_io,
.restart = cpu8815_restart,
.dt_compat = cpu8815_board_compat,
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment