Commit 98639a67 authored by Russell King's avatar Russell King Committed by Russell King
Browse files

[SERIAL] amba-pl010: Remove accessor macros



Remove unnecessary accessor macros, using readb/writel directly
instead.
Signed-off-by: default avatarRussell King <rmk+kernel@arm.linux.org.uk>
parent 111c9bf8
......@@ -62,26 +62,8 @@
#define AMBA_ISR_PASS_LIMIT 256
/*
* Access macros for the AMBA UARTs
*/
#define UART_GET_INT_STATUS(p) readb((p)->membase + UART010_IIR)
#define UART_PUT_ICR(p, c) writel((c), (p)->membase + UART010_ICR)
#define UART_GET_FR(p) readb((p)->membase + UART01x_FR)
#define UART_GET_CHAR(p) readb((p)->membase + UART01x_DR)
#define UART_PUT_CHAR(p, c) writel((c), (p)->membase + UART01x_DR)
#define UART_GET_RSR(p) readb((p)->membase + UART01x_RSR)
#define UART_GET_CR(p) readb((p)->membase + UART010_CR)
#define UART_PUT_CR(p,c) writel((c), (p)->membase + UART010_CR)
#define UART_GET_LCRL(p) readb((p)->membase + UART010_LCRL)
#define UART_PUT_LCRL(p,c) writel((c), (p)->membase + UART010_LCRL)
#define UART_GET_LCRM(p) readb((p)->membase + UART010_LCRM)
#define UART_PUT_LCRM(p,c) writel((c), (p)->membase + UART010_LCRM)
#define UART_GET_LCRH(p) readb((p)->membase + UART010_LCRH)
#define UART_PUT_LCRH(p,c) writel((c), (p)->membase + UART010_LCRH)
#define UART_RX_DATA(s) (((s) & UART01x_FR_RXFE) == 0)
#define UART_TX_READY(s) (((s) & UART01x_FR_TXFF) == 0)
#define UART_TX_EMPTY(p) ((UART_GET_FR(p) & UART01x_FR_TMSK) == 0)
#define UART_DUMMY_RSR_RX /*256*/0
#define UART_PORT_SIZE 64
......@@ -110,36 +92,36 @@ static void pl010_stop_tx(struct uart_port *port)
{
unsigned int cr;
cr = UART_GET_CR(port);
cr = readb(port->membase + UART010_CR);
cr &= ~UART010_CR_TIE;
UART_PUT_CR(port, cr);
writel(cr, port->membase + UART010_CR);
}
static void pl010_start_tx(struct uart_port *port)
{
unsigned int cr;
cr = UART_GET_CR(port);
cr = readb(port->membase + UART010_CR);
cr |= UART010_CR_TIE;
UART_PUT_CR(port, cr);
writel(cr, port->membase + UART010_CR);
}
static void pl010_stop_rx(struct uart_port *port)
{
unsigned int cr;
cr = UART_GET_CR(port);
cr = readb(port->membase + UART010_CR);
cr &= ~(UART010_CR_RIE | UART010_CR_RTIE);
UART_PUT_CR(port, cr);
writel(cr, port->membase + UART010_CR);
}
static void pl010_enable_ms(struct uart_port *port)
{
unsigned int cr;
cr = UART_GET_CR(port);
cr = readb(port->membase + UART010_CR);
cr |= UART010_CR_MSIE;
UART_PUT_CR(port, cr);
writel(cr, port->membase + UART010_CR);
}
static void
......@@ -152,9 +134,9 @@ pl010_rx_chars(struct uart_port *port)
struct tty_struct *tty = port->info->tty;
unsigned int status, ch, flag, rsr, max_count = 256;
status = UART_GET_FR(port);
status = readb(port->membase + UART01x_FR);
while (UART_RX_DATA(status) && max_count--) {
ch = UART_GET_CHAR(port);
ch = readb(port->membase + UART01x_DR);
flag = TTY_NORMAL;
port->icount.rx++;
......@@ -163,7 +145,7 @@ pl010_rx_chars(struct uart_port *port)
* Note that the error handling code is
* out of the main execution path
*/
rsr = UART_GET_RSR(port) | UART_DUMMY_RSR_RX;
rsr = readb(port->membase + UART01x_RSR) | UART_DUMMY_RSR_RX;
if (unlikely(rsr & UART01x_RSR_ANY)) {
if (rsr & UART01x_RSR_BE) {
rsr &= ~(UART01x_RSR_FE | UART01x_RSR_PE);
......@@ -193,7 +175,7 @@ pl010_rx_chars(struct uart_port *port)
uart_insert_char(port, rsr, UART01x_RSR_OE, ch, flag);
ignore_char:
status = UART_GET_FR(port);
status = readb(port->membase + UART01x_FR);
}
tty_flip_buffer_push(tty);
return;
......@@ -205,7 +187,7 @@ static void pl010_tx_chars(struct uart_port *port)
int count;
if (port->x_char) {
UART_PUT_CHAR(port, port->x_char);
writel(port->x_char, port->membase + UART01x_DR);
port->icount.tx++;
port->x_char = 0;
return;
......@@ -217,7 +199,7 @@ static void pl010_tx_chars(struct uart_port *port)
count = port->fifosize >> 1;
do {
UART_PUT_CHAR(port, xmit->buf[xmit->tail]);
writel(xmit->buf[xmit->tail], port->membase + UART01x_DR);
xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
port->icount.tx++;
if (uart_circ_empty(xmit))
......@@ -236,9 +218,9 @@ static void pl010_modem_status(struct uart_port *port)
struct uart_amba_port *uap = (struct uart_amba_port *)port;
unsigned int status, delta;
UART_PUT_ICR(&uap->port, 0);
writel(0, uap->port.membase + UART010_ICR);
status = UART_GET_FR(&uap->port) & UART01x_FR_MODEM_ANY;
status = readb(uap->port.membase + UART01x_FR) & UART01x_FR_MODEM_ANY;
delta = status ^ uap->old_status;
uap->old_status = status;
......@@ -266,7 +248,7 @@ static irqreturn_t pl010_int(int irq, void *dev_id, struct pt_regs *regs)
spin_lock(&port->lock);
status = UART_GET_INT_STATUS(port);
status = readb(port->membase + UART010_IIR);
if (status) {
do {
if (status & (UART010_IIR_RTIS | UART010_IIR_RIS))
......@@ -283,7 +265,7 @@ static irqreturn_t pl010_int(int irq, void *dev_id, struct pt_regs *regs)
if (pass_counter-- == 0)
break;
status = UART_GET_INT_STATUS(port);
status = readb(port->membase + UART010_IIR);
} while (status & (UART010_IIR_RTIS | UART010_IIR_RIS |
UART010_IIR_TIS));
handled = 1;
......@@ -296,7 +278,7 @@ static irqreturn_t pl010_int(int irq, void *dev_id, struct pt_regs *regs)
static unsigned int pl010_tx_empty(struct uart_port *port)
{
return UART_GET_FR(port) & UART01x_FR_BUSY ? 0 : TIOCSER_TEMT;
return readb(port->membase + UART01x_FR) & UART01x_FR_BUSY ? 0 : TIOCSER_TEMT;
}
static unsigned int pl010_get_mctrl(struct uart_port *port)
......@@ -304,7 +286,7 @@ static unsigned int pl010_get_mctrl(struct uart_port *port)
unsigned int result = 0;
unsigned int status;
status = UART_GET_FR(port);
status = readb(port->membase + UART01x_FR);
if (status & UART01x_FR_DCD)
result |= TIOCM_CAR;
if (status & UART01x_FR_DSR)
......@@ -340,12 +322,12 @@ static void pl010_break_ctl(struct uart_port *port, int break_state)
unsigned int lcr_h;
spin_lock_irqsave(&port->lock, flags);
lcr_h = UART_GET_LCRH(port);
lcr_h = readb(port->membase + UART010_LCRH);
if (break_state == -1)
lcr_h |= UART01x_LCRH_BRK;
else
lcr_h &= ~UART01x_LCRH_BRK;
UART_PUT_LCRH(port, lcr_h);
writel(lcr_h, port->membase + UART010_LCRH);
spin_unlock_irqrestore(&port->lock, flags);
}
......@@ -364,13 +346,13 @@ static int pl010_startup(struct uart_port *port)
/*
* initialise the old status of the modem signals
*/
uap->old_status = UART_GET_FR(port) & UART01x_FR_MODEM_ANY;
uap->old_status = readb(port->membase + UART01x_FR) & UART01x_FR_MODEM_ANY;
/*
* Finally, enable interrupts
*/
UART_PUT_CR(port, UART01x_CR_UARTEN | UART010_CR_RIE |
UART010_CR_RTIE);
writel(UART01x_CR_UARTEN | UART010_CR_RIE | UART010_CR_RTIE,
port->membase + UART010_CR);
return 0;
}
......@@ -385,11 +367,12 @@ static void pl010_shutdown(struct uart_port *port)
/*
* disable all interrupts, disable the port
*/
UART_PUT_CR(port, 0);
writel(0, port->membase + UART010_CR);
/* disable break condition and fifos */
UART_PUT_LCRH(port, UART_GET_LCRH(port) &
~(UART01x_LCRH_BRK | UART01x_LCRH_FEN));
writel(readb(port->membase + UART010_LCRH) &
~(UART01x_LCRH_BRK | UART01x_LCRH_FEN),
port->membase + UART010_LCRH);
}
static void
......@@ -466,25 +449,25 @@ pl010_set_termios(struct uart_port *port, struct termios *termios,
port->ignore_status_mask |= UART_DUMMY_RSR_RX;
/* first, disable everything */
old_cr = UART_GET_CR(port) & ~UART010_CR_MSIE;
old_cr = readb(port->membase + UART010_CR) & ~UART010_CR_MSIE;
if (UART_ENABLE_MS(port, termios->c_cflag))
old_cr |= UART010_CR_MSIE;
UART_PUT_CR(port, 0);
writel(0, port->membase + UART010_CR);
/* Set baud rate */
quot -= 1;
UART_PUT_LCRM(port, ((quot & 0xf00) >> 8));
UART_PUT_LCRL(port, (quot & 0xff));
writel((quot & 0xf00) >> 8, port->membase + UART010_LCRM);
writel(quot & 0xff, port->membase + UART010_LCRL);
/*
* ----------v----------v----------v----------v-----
* NOTE: MUST BE WRITTEN AFTER UARTLCR_M & UARTLCR_L
* ----------^----------^----------^----------^-----
*/
UART_PUT_LCRH(port, lcr_h);
UART_PUT_CR(port, old_cr);
writel(lcr_h, port->membase + UART010_LCRH);
writel(old_cr, port->membase + UART010_CR);
spin_unlock_irqrestore(&port->lock, flags);
}
......@@ -593,9 +576,13 @@ static struct uart_amba_port amba_ports[UART_NR] = {
static void pl010_console_putchar(struct uart_port *port, int ch)
{
while (!UART_TX_READY(UART_GET_FR(port)))
unsigned int status;
do {
status = readb(port->membase + UART01x_FR);
barrier();
UART_PUT_CHAR(port, ch);
} while (!UART_TX_READY(status));
writel(ch, port->membase + UART01x_DR);
}
static void
......@@ -607,8 +594,8 @@ pl010_console_write(struct console *co, const char *s, unsigned int count)
/*
* First save the CR then disable the interrupts
*/
old_cr = UART_GET_CR(port);
UART_PUT_CR(port, UART01x_CR_UARTEN);
old_cr = readb(port->membase + UART010_CR);
writel(UART01x_CR_UARTEN, port->membase + UART010_CR);
uart_console_write(port, s, count, pl010_console_putchar);
......@@ -617,18 +604,19 @@ pl010_console_write(struct console *co, const char *s, unsigned int count)
* and restore the TCR
*/
do {
status = UART_GET_FR(port);
status = readb(port->membase + UART01x_FR);
barrier();
} while (status & UART01x_FR_BUSY);
UART_PUT_CR(port, old_cr);
writel(old_cr, port->membase + UART010_CR);
}
static void __init
pl010_console_get_options(struct uart_port *port, int *baud,
int *parity, int *bits)
{
if (UART_GET_CR(port) & UART01x_CR_UARTEN) {
if (readb(port->membase + UART010_CR) & UART01x_CR_UARTEN) {
unsigned int lcr_h, quot;
lcr_h = UART_GET_LCRH(port);
lcr_h = readb(port->membase + UART010_LCRH);
*parity = 'n';
if (lcr_h & UART01x_LCRH_PEN) {
......@@ -643,7 +631,7 @@ pl010_console_get_options(struct uart_port *port, int *baud,
else
*bits = 8;
quot = UART_GET_LCRL(port) | UART_GET_LCRM(port) << 8;
quot = readb(port->membase + UART010_LCRL) | readb(port->membase + UART010_LCRM) << 8;
*baud = port->uartclk / (16 * (quot + 1));
}
}
......
Markdown is supported
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment