Commit 933faa43 authored by John W. Linville's avatar John W. Linville
Browse files
parents 531efffc 6abb9cb9
......@@ -132,9 +132,7 @@
!Finclude/net/cfg80211.h cfg80211_send_rx_assoc
!Finclude/net/cfg80211.h cfg80211_send_assoc_timeout
!Finclude/net/cfg80211.h cfg80211_send_deauth
!Finclude/net/cfg80211.h __cfg80211_send_deauth
!Finclude/net/cfg80211.h cfg80211_send_disassoc
!Finclude/net/cfg80211.h __cfg80211_send_disassoc
!Finclude/net/cfg80211.h cfg80211_ibss_joined
!Finclude/net/cfg80211.h cfg80211_connect_result
!Finclude/net/cfg80211.h cfg80211_roamed
......
......@@ -1347,14 +1347,6 @@ struct il_rx_mpdu_res_start {
#define TX_CMD_SEC_SHIFT 6
#define TX_CMD_SEC_KEY128 0x08
/*
* security overhead sizes
*/
#define WEP_IV_LEN 4
#define WEP_ICV_LEN 4
#define CCMP_MIC_LEN 8
#define TKIP_ICV_LEN 4
/*
* C_TX = 0x1c (command)
*/
......
......@@ -1220,14 +1220,6 @@ struct iwl_rx_mpdu_res_start {
#define TX_CMD_SEC_SHIFT 6
#define TX_CMD_SEC_KEY128 0x08
/*
* security overhead sizes
*/
#define WEP_IV_LEN 4
#define WEP_ICV_LEN 4
#define CCMP_MIC_LEN 8
#define TKIP_ICV_LEN 4
/*
* REPLY_TX = 0x1c (command)
*/
......
......@@ -84,15 +84,6 @@ static const struct ieee80211_iface_limit iwl_mvm_limits[] = {
.types = BIT(NL80211_IFTYPE_STATION) |
BIT(NL80211_IFTYPE_AP),
},
{
.max = 1,
.types = BIT(NL80211_IFTYPE_P2P_CLIENT) |
BIT(NL80211_IFTYPE_P2P_GO),
},
{
.max = 1,
.types = BIT(NL80211_IFTYPE_P2P_DEVICE),
},
};
static const struct ieee80211_iface_combination iwl_mvm_iface_combinations[] = {
......@@ -173,10 +164,7 @@ int iwl_mvm_mac_setup_register(struct iwl_mvm *mvm)
hw->chanctx_data_size = sizeof(u16);
hw->wiphy->interface_modes = BIT(NL80211_IFTYPE_STATION) |
BIT(NL80211_IFTYPE_P2P_CLIENT) |
BIT(NL80211_IFTYPE_AP) |
BIT(NL80211_IFTYPE_P2P_GO) |
BIT(NL80211_IFTYPE_P2P_DEVICE);
BIT(NL80211_IFTYPE_AP);
hw->wiphy->flags |= WIPHY_FLAG_CUSTOM_REGULATORY |
WIPHY_FLAG_DISABLE_BEACON_HINTS |
......
......@@ -224,13 +224,13 @@ static void iwl_pcie_txq_update_byte_cnt_tbl(struct iwl_trans *trans,
switch (sec_ctl & TX_CMD_SEC_MSK) {
case TX_CMD_SEC_CCM:
len += CCMP_MIC_LEN;
len += IEEE80211_CCMP_MIC_LEN;
break;
case TX_CMD_SEC_TKIP:
len += TKIP_ICV_LEN;
len += IEEE80211_TKIP_ICV_LEN;
break;
case TX_CMD_SEC_WEP:
len += WEP_IV_LEN + WEP_ICV_LEN;
len += IEEE80211_WEP_IV_LEN + IEEE80211_WEP_ICV_LEN;
break;
}
......
......@@ -1723,11 +1723,11 @@ static void mac80211_hwsim_free(void)
class_destroy(hwsim_class);
}
static struct device_driver mac80211_hwsim_driver = {
.name = "mac80211_hwsim",
.bus = &platform_bus_type,
.owner = THIS_MODULE,
static struct platform_driver mac80211_hwsim_driver = {
.driver = {
.name = "mac80211_hwsim",
.owner = THIS_MODULE,
},
};
static const struct net_device_ops hwsim_netdev_ops = {
......@@ -2169,7 +2169,6 @@ static const struct ieee80211_iface_limit hwsim_if_limits[] = {
#endif
BIT(NL80211_IFTYPE_AP) |
BIT(NL80211_IFTYPE_P2P_GO) },
{ .max = 1, .types = BIT(NL80211_IFTYPE_P2P_DEVICE) },
};
static struct ieee80211_iface_combination hwsim_if_comb = {
......@@ -2219,7 +2218,7 @@ static int __init init_mac80211_hwsim(void)
spin_lock_init(&hwsim_radio_lock);
INIT_LIST_HEAD(&hwsim_radios);
err = driver_register(&mac80211_hwsim_driver);
err = platform_driver_register(&mac80211_hwsim_driver);
if (err)
return err;
......@@ -2254,7 +2253,7 @@ static int __init init_mac80211_hwsim(void)
err = -ENOMEM;
goto failed_drvdata;
}
data->dev->driver = &mac80211_hwsim_driver;
data->dev->driver = &mac80211_hwsim_driver.driver;
err = device_bind_driver(data->dev);
if (err != 0) {
printk(KERN_DEBUG
......@@ -2295,8 +2294,7 @@ static int __init init_mac80211_hwsim(void)
BIT(NL80211_IFTYPE_P2P_CLIENT) |
BIT(NL80211_IFTYPE_P2P_GO) |
BIT(NL80211_IFTYPE_ADHOC) |
BIT(NL80211_IFTYPE_MESH_POINT) |
BIT(NL80211_IFTYPE_P2P_DEVICE);
BIT(NL80211_IFTYPE_MESH_POINT);
hw->flags = IEEE80211_HW_MFP_CAPABLE |
IEEE80211_HW_SIGNAL_DBM |
......@@ -2564,7 +2562,7 @@ failed_drvdata:
failed:
mac80211_hwsim_free();
failed_unregister_driver:
driver_unregister(&mac80211_hwsim_driver);
platform_driver_unregister(&mac80211_hwsim_driver);
return err;
}
module_init(init_mac80211_hwsim);
......@@ -2577,6 +2575,6 @@ static void __exit exit_mac80211_hwsim(void)
mac80211_hwsim_free();
unregister_netdev(hwsim_mon);
driver_unregister(&mac80211_hwsim_driver);
platform_driver_unregister(&mac80211_hwsim_driver);
}
module_exit(exit_mac80211_hwsim);
......@@ -1829,6 +1829,15 @@ enum ieee80211_key_len {
WLAN_KEY_LEN_AES_CMAC = 16,
};
#define IEEE80211_WEP_IV_LEN 4
#define IEEE80211_WEP_ICV_LEN 4
#define IEEE80211_CCMP_HDR_LEN 8
#define IEEE80211_CCMP_MIC_LEN 8
#define IEEE80211_CCMP_PN_LEN 6
#define IEEE80211_TKIP_IV_LEN 8
#define IEEE80211_TKIP_ICV_LEN 4
#define IEEE80211_CMAC_PN_LEN 6
/* Public action codes */
enum ieee80211_pub_actioncode {
WLAN_PUB_ACTION_EXT_CHANSW_ANN = 4,
......
......@@ -753,6 +753,8 @@ int cfg80211_check_station_change(struct wiphy *wiphy,
* @STATION_INFO_LOCAL_PM: @local_pm filled
* @STATION_INFO_PEER_PM: @peer_pm filled
* @STATION_INFO_NONPEER_PM: @nonpeer_pm filled
* @STATION_INFO_CHAIN_SIGNAL: @chain_signal filled
* @STATION_INFO_CHAIN_SIGNAL_AVG: @chain_signal_avg filled
*/
enum station_info_flags {
STATION_INFO_INACTIVE_TIME = 1<<0,
......@@ -781,6 +783,8 @@ enum station_info_flags {
STATION_INFO_NONPEER_PM = 1<<23,
STATION_INFO_RX_BYTES64 = 1<<24,
STATION_INFO_TX_BYTES64 = 1<<25,
STATION_INFO_CHAIN_SIGNAL = 1<<26,
STATION_INFO_CHAIN_SIGNAL_AVG = 1<<27,
};
/**
......@@ -857,6 +861,8 @@ struct sta_bss_parameters {
u16 beacon_interval;
};
#define IEEE80211_MAX_CHAINS 4
/**
* struct station_info - station information
*
......@@ -874,6 +880,9 @@ struct sta_bss_parameters {
* For CFG80211_SIGNAL_TYPE_MBM, value is expressed in _dBm_.
* @signal_avg: Average signal strength, type depends on the wiphy's signal_type.
* For CFG80211_SIGNAL_TYPE_MBM, value is expressed in _dBm_.
* @chains: bitmask for filled values in @chain_signal, @chain_signal_avg
* @chain_signal: per-chain signal strength of last received packet in dBm
* @chain_signal_avg: per-chain signal strength average in dBm
* @txrate: current unicast bitrate from this station
* @rxrate: current unicast bitrate to this station
* @rx_packets: packets received from this station
......@@ -909,6 +918,11 @@ struct station_info {
u8 plink_state;
s8 signal;
s8 signal_avg;
u8 chains;
s8 chain_signal[IEEE80211_MAX_CHAINS];
s8 chain_signal_avg[IEEE80211_MAX_CHAINS];
struct rate_info txrate;
struct rate_info rxrate;
u32 rx_packets;
......@@ -1147,6 +1161,7 @@ struct mesh_config {
* @sync_method: which synchronization method to use
* @path_sel_proto: which path selection protocol to use
* @path_metric: which metric to use
* @auth_id: which authentication method this mesh is using
* @ie: vendor information elements (optional)
* @ie_len: length of vendor information elements
* @is_authenticated: this mesh requires authentication
......@@ -1165,6 +1180,7 @@ struct mesh_setup {
u8 sync_method;
u8 path_sel_proto;
u8 path_metric;
u8 auth_id;
const u8 *ie;
u8 ie_len;
bool is_authenticated;
......@@ -1241,6 +1257,7 @@ struct cfg80211_ssid {
* @scan_start: time (in jiffies) when the scan started
* @wdev: the wireless device to scan for
* @aborted: (internal) scan request was notified as aborted
* @notified: (internal) scan request was notified as done or aborted
* @no_cck: used to send probe requests at non CCK rate in 2GHz band
*/
struct cfg80211_scan_request {
......@@ -1258,7 +1275,7 @@ struct cfg80211_scan_request {
/* internal */
struct wiphy *wiphy;
unsigned long scan_start;
bool aborted;
bool aborted, notified;
bool no_cck;
/* keep last */
......@@ -1850,7 +1867,9 @@ struct cfg80211_update_ft_ies_params {
* @get_mpath: get a mesh path for the given parameters
* @dump_mpath: dump mesh path callback -- resume dump at index @idx
* @join_mesh: join the mesh network with the specified parameters
* (invoked with the wireless_dev mutex held)
* @leave_mesh: leave the current mesh network
* (invoked with the wireless_dev mutex held)
*
* @get_mesh_config: Get the current mesh configuration
*
......@@ -1877,20 +1896,28 @@ struct cfg80211_update_ft_ies_params {
* the scan/scan_done bracket too.
*
* @auth: Request to authenticate with the specified peer
* (invoked with the wireless_dev mutex held)
* @assoc: Request to (re)associate with the specified peer
* (invoked with the wireless_dev mutex held)
* @deauth: Request to deauthenticate from the specified peer
* (invoked with the wireless_dev mutex held)
* @disassoc: Request to disassociate from the specified peer
* (invoked with the wireless_dev mutex held)
*
* @connect: Connect to the ESS with the specified parameters. When connected,
* call cfg80211_connect_result() with status code %WLAN_STATUS_SUCCESS.
* If the connection fails for some reason, call cfg80211_connect_result()
* with the status from the AP.
* (invoked with the wireless_dev mutex held)
* @disconnect: Disconnect from the BSS/ESS.
* (invoked with the wireless_dev mutex held)
*
* @join_ibss: Join the specified IBSS (or create if necessary). Once done, call
* cfg80211_ibss_joined(), also call that function when changing BSSID due
* to a merge.
* (invoked with the wireless_dev mutex held)
* @leave_ibss: Leave the IBSS.
* (invoked with the wireless_dev mutex held)
*
* @set_mcast_rate: Set the specified multicast rate (only if vif is in ADHOC or
* MESH mode)
......@@ -2556,6 +2583,9 @@ struct wiphy_wowlan_support {
* may request, if implemented.
*
* @wowlan: WoWLAN support information
* @wowlan_config: current WoWLAN configuration; this should usually not be
* used since access to it is necessarily racy, use the parameter passed
* to the suspend() operation instead.
*
* @ap_sme_capa: AP SME capabilities, flags from &enum nl80211_ap_sme_features.
* @ht_capa_mod_mask: Specify what ht_cap values can be over-ridden.
......@@ -2623,6 +2653,7 @@ struct wiphy {
#ifdef CONFIG_PM
struct wiphy_wowlan_support wowlan;
struct cfg80211_wowlan *wowlan_config;
#endif
u16 max_remain_on_channel_duration;
......@@ -2834,7 +2865,8 @@ struct cfg80211_cached_keys;
* by cfg80211 on change_interface
* @mgmt_registrations: list of registrations for management frames
* @mgmt_registrations_lock: lock for the list
* @mtx: mutex used to lock data in this struct
* @mtx: mutex used to lock data in this struct, may be used by drivers
* and some API functions require it held
* @cleanup_work: work struct used for cleanup that can't be done directly
* @beacon_interval: beacon interval used on this device for transmitting
* beacons, 0 when not valid
......@@ -2858,8 +2890,6 @@ struct wireless_dev {
struct mutex mtx;
struct work_struct cleanup_work;
bool use_4addr, p2p_started;
u8 address[ETH_ALEN] __aligned(sizeof(u16));
......@@ -2989,6 +3019,15 @@ struct ieee80211_rate *
ieee80211_get_response_rate(struct ieee80211_supported_band *sband,
u32 basic_rates, int bitrate);
/**
* ieee80211_mandatory_rates - get mandatory rates for a given band
* @sband: the band to look for rates in
*
* This function returns a bitmap of the mandatory rates for the given
* band, bits are set according to the rate position in the bitrates array.
*/
u32 ieee80211_mandatory_rates(struct ieee80211_supported_band *sband);
/*
* Radiotap parsing functions -- for controlled injection support
*
......@@ -3400,7 +3439,8 @@ void cfg80211_unlink_bss(struct wiphy *wiphy, struct cfg80211_bss *bss);
* This function is called whenever an authentication has been processed in
* station mode. The driver is required to call either this function or
* cfg80211_send_auth_timeout() to indicate the result of cfg80211_ops::auth()
* call. This function may sleep.
* call. This function may sleep. The caller must hold the corresponding wdev's
* mutex.
*/
void cfg80211_send_rx_auth(struct net_device *dev, const u8 *buf, size_t len);
......@@ -3409,7 +3449,8 @@ void cfg80211_send_rx_auth(struct net_device *dev, const u8 *buf, size_t len);
* @dev: network device
* @addr: The MAC address of the device with which the authentication timed out
*
* This function may sleep.
* This function may sleep. The caller must hold the corresponding wdev's
* mutex.
*/
void cfg80211_send_auth_timeout(struct net_device *dev, const u8 *addr);
......@@ -3424,7 +3465,8 @@ void cfg80211_send_auth_timeout(struct net_device *dev, const u8 *addr);
* This function is called whenever a (re)association response has been
* processed in station mode. The driver is required to call either this
* function or cfg80211_send_assoc_timeout() to indicate the result of
* cfg80211_ops::assoc() call. This function may sleep.
* cfg80211_ops::assoc() call. This function may sleep. The caller must hold
* the corresponding wdev's mutex.
*/
void cfg80211_send_rx_assoc(struct net_device *dev, struct cfg80211_bss *bss,
const u8 *buf, size_t len);
......@@ -3434,7 +3476,7 @@ void cfg80211_send_rx_assoc(struct net_device *dev, struct cfg80211_bss *bss,
* @dev: network device
* @addr: The MAC address of the device with which the association timed out
*
* This function may sleep.
* This function may sleep. The caller must hold the corresponding wdev's mutex.
*/
void cfg80211_send_assoc_timeout(struct net_device *dev, const u8 *addr);
......@@ -3446,20 +3488,11 @@ void cfg80211_send_assoc_timeout(struct net_device *dev, const u8 *addr);
*
* This function is called whenever deauthentication has been processed in
* station mode. This includes both received deauthentication frames and
* locally generated ones. This function may sleep.
* locally generated ones. This function may sleep. The caller must hold the
* corresponding wdev's mutex.
*/
void cfg80211_send_deauth(struct net_device *dev, const u8 *buf, size_t len);
/**
* __cfg80211_send_deauth - notification of processed deauthentication
* @dev: network device
* @buf: deauthentication frame (header + body)
* @len: length of the frame data
*
* Like cfg80211_send_deauth(), but doesn't take the wdev lock.
*/
void __cfg80211_send_deauth(struct net_device *dev, const u8 *buf, size_t len);
/**
* cfg80211_send_disassoc - notification of processed disassociation
* @dev: network device
......@@ -3468,21 +3501,11 @@ void __cfg80211_send_deauth(struct net_device *dev, const u8 *buf, size_t len);
*
* This function is called whenever disassociation has been processed in
* station mode. This includes both received disassociation frames and locally
* generated ones. This function may sleep.
* generated ones. This function may sleep. The caller must hold the
* corresponding wdev's mutex.
*/
void cfg80211_send_disassoc(struct net_device *dev, const u8 *buf, size_t len);
/**
* __cfg80211_send_disassoc - notification of processed disassociation
* @dev: network device
* @buf: disassociation response frame (header + body)
* @len: length of the frame data
*
* Like cfg80211_send_disassoc(), but doesn't take the wdev lock.
*/
void __cfg80211_send_disassoc(struct net_device *dev, const u8 *buf,
size_t len);
/**
* cfg80211_send_unprot_deauth - notification of unprotected deauthentication
* @dev: network device
......@@ -4153,6 +4176,7 @@ void cfg80211_report_wowlan_wakeup(struct wireless_dev *wdev,
* cfg80211_crit_proto_stopped() - indicate critical protocol stopped by driver.
*
* @wdev: the wireless device for which critical protocol is stopped.
* @gfp: allocation flags
*
* This function can be called by the driver to indicate it has reverted
* operation back to normal. One reason could be that the duration given
......
......@@ -269,6 +269,7 @@ enum ieee80211_radiotap_type {
#define IEEE80211_RADIOTAP_MCS_HAVE_GI 0x04
#define IEEE80211_RADIOTAP_MCS_HAVE_FMT 0x08
#define IEEE80211_RADIOTAP_MCS_HAVE_FEC 0x10
#define IEEE80211_RADIOTAP_MCS_HAVE_STBC 0x20
#define IEEE80211_RADIOTAP_MCS_BW_MASK 0x03
#define IEEE80211_RADIOTAP_MCS_BW_20 0
......@@ -278,6 +279,12 @@ enum ieee80211_radiotap_type {
#define IEEE80211_RADIOTAP_MCS_SGI 0x04
#define IEEE80211_RADIOTAP_MCS_FMT_GF 0x08
#define IEEE80211_RADIOTAP_MCS_FEC_LDPC 0x10
#define IEEE80211_RADIOTAP_MCS_STBC_MASK 0x60
#define IEEE80211_RADIOTAP_MCS_STBC_1 1
#define IEEE80211_RADIOTAP_MCS_STBC_2 2
#define IEEE80211_RADIOTAP_MCS_STBC_3 3
#define IEEE80211_RADIOTAP_MCS_STBC_SHIFT 5
/* For IEEE80211_RADIOTAP_AMPDU_STATUS */
#define IEEE80211_RADIOTAP_AMPDU_REPORT_ZEROLEN 0x0001
......
......@@ -805,6 +805,7 @@ ieee80211_tx_info_clear_status(struct ieee80211_tx_info *info)
* on this subframe
* @RX_FLAG_AMPDU_DELIM_CRC_KNOWN: The delimiter CRC field is known (the CRC
* is stored in the @ampdu_delimiter_crc field)
* @RX_FLAG_STBC_MASK: STBC 2 bit bitmask. 1 - Nss=1, 2 - Nss=2, 3 - Nss=3
*/
enum mac80211_rx_flags {
RX_FLAG_MMIC_ERROR = BIT(0),
......@@ -832,8 +833,11 @@ enum mac80211_rx_flags {
RX_FLAG_80MHZ = BIT(23),
RX_FLAG_80P80MHZ = BIT(24),
RX_FLAG_160MHZ = BIT(25),
RX_FLAG_STBC_MASK = BIT(26) | BIT(27),
};
#define RX_FLAG_STBC_SHIFT 26
/**
* struct ieee80211_rx_status - receive status
*
......@@ -850,6 +854,10 @@ enum mac80211_rx_flags {
* @signal: signal strength when receiving this frame, either in dBm, in dB or
* unspecified depending on the hardware capabilities flags
* @IEEE80211_HW_SIGNAL_*
* @chains: bitmask of receive chains for which separate signal strength
* values were filled.
* @chain_signal: per-chain signal strength, in dBm (unlike @signal, doesn't
* support dB or unspecified units)
* @antenna: antenna used
* @rate_idx: index of data rate into band's supported rates or MCS index if
* HT or VHT is used (%RX_FLAG_HT/%RX_FLAG_VHT)
......@@ -881,6 +889,8 @@ struct ieee80211_rx_status {
u8 band;
u8 antenna;
s8 signal;
u8 chains;
s8 chain_signal[IEEE80211_MAX_CHAINS];
u8 ampdu_delimiter_crc;
u8 vendor_radiotap_align;
u8 vendor_radiotap_oui[3];
......@@ -1235,7 +1245,7 @@ enum ieee80211_sta_rx_bandwidth {
* struct ieee80211_sta_rates - station rate selection table
*
* @rcu_head: RCU head used for freeing the table on update
* @rates: transmit rates/flags to be used by default.
* @rate: transmit rates/flags to be used by default.
* Overriding entries per-packet is possible by using cb tx control.
*/
struct ieee80211_sta_rates {
......@@ -1276,7 +1286,7 @@ struct ieee80211_sta_rates {
* notifications and capabilities. The value is only valid after
* the station moves to associated state.
* @smps_mode: current SMPS mode (off, static or dynamic)
* @tx_rates: rate control selection table
* @rates: rate control selection table
*/
struct ieee80211_sta {
u32 supp_rates[IEEE80211_NUM_BANDS];
......@@ -3043,7 +3053,8 @@ void ieee80211_napi_complete(struct ieee80211_hw *hw);
* This function may not be called in IRQ context. Calls to this function
* for a single hardware must be synchronized against each other. Calls to
* this function, ieee80211_rx_ni() and ieee80211_rx_irqsafe() may not be
* mixed for a single hardware.
* mixed for a single hardware. Must not run concurrently with
* ieee80211_tx_status() or ieee80211_tx_status_ni().
*
* In process context use instead ieee80211_rx_ni().
*
......@@ -3059,7 +3070,8 @@ void ieee80211_rx(struct ieee80211_hw *hw, struct sk_buff *skb);
* (internally defers to a tasklet.)
*
* Calls to this function, ieee80211_rx() or ieee80211_rx_ni() may not
* be mixed for a single hardware.
* be mixed for a single hardware.Must not run concurrently with
* ieee80211_tx_status() or ieee80211_tx_status_ni().
*
* @hw: the hardware this frame came in on
* @skb: the buffer to receive, owned by mac80211 after this call
......@@ -3073,7 +3085,8 @@ void ieee80211_rx_irqsafe(struct ieee80211_hw *hw, struct sk_buff *skb);
* (internally disables bottom halves).
*
* Calls to this function, ieee80211_rx() and ieee80211_rx_irqsafe() may
* not be mixed for a single hardware.
* not be mixed for a single hardware. Must not run concurrently with
* ieee80211_tx_status() or ieee80211_tx_status_ni().
*
* @hw: the hardware this frame came in on
* @skb: the buffer to receive, owned by mac80211 after this call
......@@ -3196,7 +3209,8 @@ void ieee80211_get_tx_rates(struct ieee80211_vif *vif,
* This function may not be called in IRQ context. Calls to this function
* for a single hardware must be synchronized against each other. Calls
* to this function, ieee80211_tx_status_ni() and ieee80211_tx_status_irqsafe()
* may not be mixed for a single hardware.
* may not be mixed for a single hardware. Must not run concurrently with
* ieee80211_rx() or ieee80211_rx_ni().
*
* @hw: the hardware the frame was transmitted by
* @skb: the frame that was transmitted, owned by mac80211 after this call
......
......@@ -27,6 +27,8 @@
#include <linux/types.h>
#define NL80211_GENL_NAME "nl80211"
/**
* DOC: Station handling
*
......@@ -1429,6 +1431,11 @@ enum nl80211_commands {
* @NL80211_ATTR_MAX_CRIT_PROT_DURATION: duration in milliseconds in which
* the connection should have increased reliability (u16).
*
* @NL80211_ATTR_PEER_AID: Association ID for the peer TDLS station (u16).
* This is similar to @NL80211_ATTR_STA_AID but with a difference of being
* allowed to be used with the first @NL80211_CMD_SET_STATION command to
* update a TDLS peer STA entry.
*
* @NL80211_ATTR_MAX: highest attribute number currently defined
* @__NL80211_ATTR_AFTER_LAST: internal use
*/
......@@ -1727,6 +1734,8 @@ enum nl80211_attrs {
NL80211_ATTR_CRIT_PROT_ID,
NL80211_ATTR_MAX_CRIT_PROT_DURATION,
NL80211_ATTR_PEER_AID,
/* add attributes here, update the policy in nl80211.c */
__NL80211_ATTR_AFTER_LAST,
......@@ -1991,6 +2000,10 @@ enum nl80211_sta_bss_param {
* @NL80211_STA_INFO_PEER_PM: peer mesh STA link-specific power mode
* @NL80211_STA_INFO_NONPEER_PM: neighbor mesh STA power save mode towards
* non-peer STA
* @NL80211_STA_INFO_CHAIN_SIGNAL: per-chain signal strength of last PPDU
* Contains a nested array of signal strength attributes (u8, dBm)
* @NL80211_STA_INFO_CHAIN_SIGNAL_AVG: per-chain signal strength average
* Same format as NL80211_STA_INFO_CHAIN_SIGNAL.
* @__NL80211_STA_INFO_AFTER_LAST: internal
* @NL80211_STA_INFO_MAX: highest possible station info attribute
*/
......@@ -2020,6 +2033,8 @@ enum nl80211_sta_info {
NL80211_STA_INFO_NONPEER_PM,
NL80211_STA_INFO_RX_BYTES64,
NL80211_STA_INFO_TX_BYTES64,
NL80211_STA_INFO_CHAIN_SIGNAL,
NL80211_STA_INFO_CHAIN_SIGNAL_AVG,
/* keep last */
__NL80211_STA_INFO_AFTER_LAST,
......@@ -2637,6 +2652,10 @@ enum nl80211_meshconf_params {
* @NL80211_MESH_SETUP_USERSPACE_MPM: Enable this option if userspace will
* implement an MPM which handles peer allocation and state.
*
* @NL80211_MESH_SETUP_AUTH_PROTOCOL: Inform the kernel of the authentication
* method (u8, as defined in IEEE 8.4.2.100.6, e.g. 0x1 for SAE).
* Default is no authentication method required.
*
* @NL80211_MESH_SETUP_ATTR_MAX: highest possible mesh setup attribute number
*
* @__NL80211_MESH_SETUP_ATTR_AFTER_LAST: Internal use
......@@ -2650,6 +2669,7 @@ enum nl80211_mesh_setup_params {
NL80211_MESH_SETUP_USERSPACE_AMPE,
NL80211_MESH_SETUP_ENABLE_VENDOR_SYNC,
NL80211_MESH_SETUP_USERSPACE_MPM,
NL80211_MESH_SETUP_AUTH_PROTOCOL,
/* keep last */
__NL80211_MESH_SETUP_ATTR_AFTER_LAST,
......
......@@ -85,7 +85,7 @@ void ieee80211_aes_ccm_encrypt(struct crypto_cipher *tfm, u8 *scratch,
*cpos++ = *pos++ ^ e[i];
}
for (i = 0; i < CCMP_MIC_LEN; i++)
for (i = 0; i < IEEE80211_CCMP_MIC_LEN; i++)
mic[i] = b[i] ^ s_0[i];
}
......@@ -123,7 +123,7 @@ int ieee80211_aes_ccm_decrypt(struct crypto_cipher *tfm, u8 *scratch,
crypto_cipher_encrypt_one(tfm, a, a);
}
for (i = 0; i < CCMP_MIC_LEN; i++) {
for (i = 0; i < IEEE80211_CCMP_MIC_LEN; i++) {
if ((mic[i] ^ s_0[i]) != a[i])
return -1;
}
......@@ -138,7 +138,7 @@ struct crypto_cipher *ieee80211_aes_key_setup_encrypt(const u8 key[])
tfm = crypto_alloc_cipher("aes", 0, CRYPTO_ALG_ASYNC);
if (!IS_ERR(tfm))
crypto_cipher_setkey(tfm, key, ALG_CCMP_KEY_LEN);
crypto_cipher_setkey(tfm, key, WLAN_KEY_LEN_CCMP);