Commit 92389ca8 authored by Rabin Vincent's avatar Rabin Vincent Committed by Linus Walleij
Browse files

ux500: remove build-time changing macros



To allow the possiblity of building U8500 and U5500 support in the same
image.
Signed-off-by: default avatarRabin Vincent <rabin.vincent@stericsson.com>
[Rebased to latest changes in Russells tree]
Signed-off-by: default avatarLinus Walleij <linus.walleij@stericsson.com>
parent 0c21e3aa
......@@ -136,8 +136,7 @@ EXPORT_SYMBOL(clk_disable);
*/
static unsigned long clk_mtu_get_rate(struct clk *clk)
{
void __iomem *addr = __io_address(UX500_PRCMU_BASE)
+ PRCM_TCR;
void __iomem *addr;
u32 tcr;
int mtu = (int) clk->data;
/*
......@@ -149,13 +148,20 @@ static unsigned long clk_mtu_get_rate(struct clk *clk)
unsigned long mturate;
unsigned long retclk;
if (cpu_is_u5500())
addr = __io_address(U5500_PRCMU_BASE);
else if (cpu_is_u8500())
addr = __io_address(U8500_PRCMU_BASE);
else
ux500_unknown_soc();
/*
* On a startup, always conifgure the TCR to the doze mode;
* bootloaders do it for us. Do this in the kernel too.
*/
writel(PRCM_TCR_DOZE_MODE, addr);
writel(PRCM_TCR_DOZE_MODE, addr + PRCM_TCR);
tcr = readl(addr);
tcr = readl(addr + PRCM_TCR);
/* Get the rate from the parent as a default */
if (clk->parent_periph)
......
......@@ -22,6 +22,16 @@
#include "devices-db5500.h"
static struct map_desc u5500_io_desc[] __initdata = {
__IO_DEV_DESC(U5500_UART0_BASE, SZ_4K),
__IO_DEV_DESC(U5500_UART2_BASE, SZ_4K),
__IO_DEV_DESC(U5500_GIC_CPU_BASE, SZ_4K),
__IO_DEV_DESC(U5500_GIC_DIST_BASE, SZ_4K),
__IO_DEV_DESC(U5500_L2CC_BASE, SZ_4K),
__IO_DEV_DESC(U5500_TWD_BASE, SZ_4K),
__IO_DEV_DESC(U5500_MTU0_BASE, SZ_4K),
__IO_DEV_DESC(U5500_SCU_BASE, SZ_4K),
__IO_DEV_DESC(U5500_BACKUPRAM0_BASE, SZ_8K),
__IO_DEV_DESC(U5500_GPIO0_BASE, SZ_4K),
__IO_DEV_DESC(U5500_GPIO1_BASE, SZ_4K),
__IO_DEV_DESC(U5500_GPIO2_BASE, SZ_4K),
......@@ -143,8 +153,6 @@ static void __init db5500_add_gpios(void)
void __init u5500_map_io(void)
{
ux500_map_io();
iotable_init(u5500_io_desc, ARRAY_SIZE(u5500_io_desc));
}
......
......@@ -30,6 +30,22 @@ static struct platform_device *platform_devs[] __initdata = {
/* minimum static i/o mapping required to boot U8500 platforms */
static struct map_desc u8500_io_desc[] __initdata = {
__IO_DEV_DESC(U8500_UART0_BASE, SZ_4K),
__IO_DEV_DESC(U8500_UART2_BASE, SZ_4K),
__IO_DEV_DESC(U8500_GIC_CPU_BASE, SZ_4K),
__IO_DEV_DESC(U8500_GIC_DIST_BASE, SZ_4K),
__IO_DEV_DESC(U8500_L2CC_BASE, SZ_4K),
__IO_DEV_DESC(U8500_TWD_BASE, SZ_4K),
__IO_DEV_DESC(U8500_MTU0_BASE, SZ_4K),
__IO_DEV_DESC(U8500_SCU_BASE, SZ_4K),
__IO_DEV_DESC(U8500_BACKUPRAM0_BASE, SZ_8K),
__IO_DEV_DESC(U8500_CLKRST1_BASE, SZ_4K),
__IO_DEV_DESC(U8500_CLKRST2_BASE, SZ_4K),
__IO_DEV_DESC(U8500_CLKRST3_BASE, SZ_4K),
__IO_DEV_DESC(U8500_CLKRST5_BASE, SZ_4K),
__IO_DEV_DESC(U8500_CLKRST6_BASE, SZ_4K),
__IO_DEV_DESC(U8500_PRCMU_BASE, SZ_4K),
__IO_DEV_DESC(U8500_GPIO0_BASE, SZ_4K),
__IO_DEV_DESC(U8500_GPIO1_BASE, SZ_4K),
......@@ -117,8 +133,6 @@ bool cpu_is_u8500v20(void)
void __init u8500_map_io(void)
{
ux500_map_io();
iotable_init(u8500_io_desc, ARRAY_SIZE(u8500_io_desc));
if (cpu_is_u8500ed())
......
......@@ -23,37 +23,29 @@
#include "clock.h"
static struct map_desc ux500_io_desc[] __initdata = {
__IO_DEV_DESC(UX500_UART0_BASE, SZ_4K),
__IO_DEV_DESC(UX500_UART2_BASE, SZ_4K),
__IO_DEV_DESC(UX500_GIC_CPU_BASE, SZ_4K),
__IO_DEV_DESC(UX500_GIC_DIST_BASE, SZ_4K),
__IO_DEV_DESC(UX500_L2CC_BASE, SZ_4K),
__IO_DEV_DESC(UX500_TWD_BASE, SZ_4K),
__IO_DEV_DESC(UX500_SCU_BASE, SZ_4K),
__IO_DEV_DESC(UX500_CLKRST1_BASE, SZ_4K),
__IO_DEV_DESC(UX500_CLKRST2_BASE, SZ_4K),
__IO_DEV_DESC(UX500_CLKRST3_BASE, SZ_4K),
__IO_DEV_DESC(UX500_CLKRST5_BASE, SZ_4K),
__IO_DEV_DESC(UX500_CLKRST6_BASE, SZ_4K),
__IO_DEV_DESC(UX500_MTU0_BASE, SZ_4K),
__IO_DEV_DESC(UX500_MTU1_BASE, SZ_4K),
__IO_DEV_DESC(UX500_BACKUPRAM0_BASE, SZ_8K),
};
#ifdef CONFIG_CACHE_L2X0
static void __iomem *l2x0_base;
#endif
void __init ux500_map_io(void)
{
iotable_init(ux500_io_desc, ARRAY_SIZE(ux500_io_desc));
}
void __init ux500_init_irq(void)
{
gic_init(0, 29, __io_address(UX500_GIC_DIST_BASE),
__io_address(UX500_GIC_CPU_BASE));
void __iomem *dist_base;
void __iomem *cpu_base;
if (cpu_is_u5500()) {
dist_base = __io_address(U5500_GIC_DIST_BASE);
cpu_base = __io_address(U5500_GIC_CPU_BASE);
} else if (cpu_is_u8500()) {
dist_base = __io_address(U8500_GIC_DIST_BASE);
cpu_base = __io_address(U8500_GIC_CPU_BASE);
} else
ux500_unknown_soc();
gic_init(0, 29, dist_base, cpu_base);
/*
* Init clocks here so that they are available for system timer
......@@ -74,7 +66,8 @@ static inline void ux500_cache_wait(void __iomem *reg, unsigned long mask)
static inline void ux500_cache_sync(void)
{
void __iomem *base = __io_address(UX500_L2CC_BASE);
void __iomem *base = l2x0_base;
writel_relaxed(0, base + L2X0_CACHE_SYNC);
ux500_cache_wait(base + L2X0_CACHE_SYNC, 1);
}
......@@ -96,20 +89,23 @@ static void ux500_l2x0_disable(void)
*/
static void ux500_l2x0_inv_all(void)
{
void __iomem *l2x0_base = __io_address(UX500_L2CC_BASE);
void __iomem *base = l2x0_base;
uint32_t l2x0_way_mask = (1<<16) - 1; /* Bitmask of active ways */
/* invalidate all ways */
writel_relaxed(l2x0_way_mask, l2x0_base + L2X0_INV_WAY);
ux500_cache_wait(l2x0_base + L2X0_INV_WAY, l2x0_way_mask);
writel_relaxed(l2x0_way_mask, base + L2X0_INV_WAY);
ux500_cache_wait(base + L2X0_INV_WAY, l2x0_way_mask);
ux500_cache_sync();
}
static int ux500_l2x0_init(void)
{
void __iomem *l2x0_base;
l2x0_base = __io_address(UX500_L2CC_BASE);
if (cpu_is_u5500())
l2x0_base = __io_address(U5500_L2CC_BASE);
else if (cpu_is_u8500())
l2x0_base = __io_address(U8500_L2CC_BASE);
else
ux500_unknown_soc();
/* 64KB way size, 8 way associativity, force WA */
l2x0_init(l2x0_base, 0x3e060000, 0xc0000fff);
......@@ -127,13 +123,21 @@ static void __init ux500_timer_init(void)
{
#ifdef CONFIG_LOCAL_TIMERS
/* Setup the local timer base */
twd_base = __io_address(UX500_TWD_BASE);
if (cpu_is_u5500())
twd_base = __io_address(U5500_TWD_BASE);
else if (cpu_is_u8500())
twd_base = __io_address(U8500_TWD_BASE);
else
ux500_unknown_soc();
#endif
/* Setup the MTU base */
if (cpu_is_u8500ed())
if (cpu_is_u5500())
mtu_base = __io_address(U5500_MTU0_BASE);
else if (cpu_is_u8500ed())
mtu_base = __io_address(U8500_MTU0_BASE_ED);
else if (cpu_is_u8500())
mtu_base = __io_address(U8500_MTU0_BASE);
else
mtu_base = __io_address(UX500_MTU0_BASE);
ux500_unknown_soc();
nmdk_timer_init();
}
......
......@@ -14,7 +14,24 @@
#error Invalid Ux500 debug UART
#endif
#define __UX500_UART(n) UX500_UART##n##_BASE
/*
* DEBUG_LL only works if only one SOC is built in. We don't use #else below
* in order to get "__UX500_UART redefined" warnings if more than one SOC is
* built, so that there's some hint during the build that something is wrong.
*/
#ifdef CONFIG_UX500_SOC_DB5500
#define __UX500_UART(n) U5500_UART##n##_BASE
#endif
#ifdef CONFIG_UX500_SOC_DB8500
#define __UX500_UART(n) U8500_UART##n##_BASE
#endif
#ifndef __UX500_UART
#error Unknown SOC
#endif
#define UX500_UART(n) __UX500_UART(n)
#define UART_BASE UX500_UART(CONFIG_UX500_DEBUG_UART)
......
......@@ -11,15 +11,10 @@
* warranty of any kind, whether express or implied.
*/
#include <mach/hardware.h>
#define HAVE_GET_IRQNR_PREAMBLE
#include <asm/hardware/entry-macro-gic.S>
.macro disable_fiq
.endm
.macro get_irqnr_preamble, base, tmp
ldr \base, =IO_ADDRESS(UX500_GIC_CPU_BASE)
.endm
.macro arch_ret_to_user, tmp1, tmp2
.endm
......@@ -29,65 +29,6 @@
#include <mach/db8500-regs.h>
#include <mach/db5500-regs.h>
#ifdef CONFIG_UX500_SOC_DB8500
#define UX500(periph) U8500_##periph##_BASE
#elif defined(CONFIG_UX500_SOC_DB5500)
#define UX500(periph) U5500_##periph##_BASE
#endif
#define UX500_BACKUPRAM0_BASE UX500(BACKUPRAM0)
#define UX500_BACKUPRAM1_BASE UX500(BACKUPRAM1)
#define UX500_B2R2_BASE UX500(B2R2)
#define UX500_CLKRST1_BASE UX500(CLKRST1)
#define UX500_CLKRST2_BASE UX500(CLKRST2)
#define UX500_CLKRST3_BASE UX500(CLKRST3)
#define UX500_CLKRST5_BASE UX500(CLKRST5)
#define UX500_CLKRST6_BASE UX500(CLKRST6)
#define UX500_DMA_BASE UX500(DMA)
#define UX500_FSMC_BASE UX500(FSMC)
#define UX500_GIC_CPU_BASE UX500(GIC_CPU)
#define UX500_GIC_DIST_BASE UX500(GIC_DIST)
#define UX500_I2C1_BASE UX500(I2C1)
#define UX500_I2C2_BASE UX500(I2C2)
#define UX500_I2C3_BASE UX500(I2C3)
#define UX500_L2CC_BASE UX500(L2CC)
#define UX500_MCDE_BASE UX500(MCDE)
#define UX500_MTU0_BASE UX500(MTU0)
#define UX500_MTU1_BASE UX500(MTU1)
#define UX500_PRCMU_BASE UX500(PRCMU)
#define UX500_RNG_BASE UX500(RNG)
#define UX500_RTC_BASE UX500(RTC)
#define UX500_SCU_BASE UX500(SCU)
#define UX500_SDI0_BASE UX500(SDI0)
#define UX500_SDI1_BASE UX500(SDI1)
#define UX500_SDI2_BASE UX500(SDI2)
#define UX500_SDI3_BASE UX500(SDI3)
#define UX500_SDI4_BASE UX500(SDI4)
#define UX500_SPI0_BASE UX500(SPI0)
#define UX500_SPI1_BASE UX500(SPI1)
#define UX500_SPI2_BASE UX500(SPI2)
#define UX500_SPI3_BASE UX500(SPI3)
#define UX500_SIA_BASE UX500(SIA)
#define UX500_SVA_BASE UX500(SVA)
#define UX500_TWD_BASE UX500(TWD)
#define UX500_UART0_BASE UX500(UART0)
#define UX500_UART1_BASE UX500(UART1)
#define UX500_UART2_BASE UX500(UART2)
#define UX500_USBOTG_BASE UX500(USBOTG)
/* ST-Ericsson modified pl022 id */
#define SSP_PER_ID 0x01080022
......@@ -143,6 +84,7 @@ static inline bool cpu_is_u5500(void)
}
#define ARRAY_AND_SIZE(x) (x), ARRAY_SIZE(x)
#define ux500_unknown_soc() BUG()
#endif
......
......@@ -14,7 +14,6 @@
#include <asm/mach/time.h>
#include <linux/init.h>
extern void __init ux500_map_io(void);
extern void __init u5500_map_io(void);
extern void __init u8500_map_io(void);
......
......@@ -20,6 +20,7 @@
#include <asm/cacheflush.h>
#include <asm/smp_scu.h>
#include <mach/hardware.h>
#include <mach/setup.h>
/*
* control for which core is the next to come out of the secondary
......@@ -40,6 +41,18 @@ static void write_pen_release(int val)
outer_clean_range(__pa(&pen_release), __pa(&pen_release + 1));
}
static void __iomem *scu_base_addr(void)
{
if (cpu_is_u5500())
return __io_address(U5500_SCU_BASE);
else if (cpu_is_u8500())
return __io_address(U8500_SCU_BASE);
else
ux500_unknown_soc();
return NULL;
}
static DEFINE_SPINLOCK(boot_lock);
void __cpuinit platform_secondary_init(unsigned int cpu)
......@@ -100,21 +113,28 @@ int __cpuinit boot_secondary(unsigned int cpu, struct task_struct *idle)
static void __init wakeup_secondary(void)
{
void __iomem *backupram;
if (cpu_is_u5500())
backupram = __io_address(U5500_BACKUPRAM0_BASE);
else if (cpu_is_u8500())
backupram = __io_address(U8500_BACKUPRAM0_BASE);
else
ux500_unknown_soc();
/*
* write the address of secondary startup into the backup ram register
* at offset 0x1FF4, then write the magic number 0xA1FEED01 to the
* backup ram register at offset 0x1FF0, which is what boot rom code
* is waiting for. This would wake up the secondary core from WFE
*/
#define U8500_CPU1_JUMPADDR_OFFSET 0x1FF4
#define UX500_CPU1_JUMPADDR_OFFSET 0x1FF4
__raw_writel(virt_to_phys(u8500_secondary_startup),
__io_address(UX500_BACKUPRAM0_BASE) +
U8500_CPU1_JUMPADDR_OFFSET);
backupram + UX500_CPU1_JUMPADDR_OFFSET);
#define U8500_CPU1_WAKEMAGIC_OFFSET 0x1FF0
#define UX500_CPU1_WAKEMAGIC_OFFSET 0x1FF0
__raw_writel(0xA1FEED01,
__io_address(UX500_BACKUPRAM0_BASE) +
U8500_CPU1_WAKEMAGIC_OFFSET);
backupram + UX500_CPU1_WAKEMAGIC_OFFSET);
/* make sure write buffer is drained */
mb();
......@@ -126,9 +146,10 @@ static void __init wakeup_secondary(void)
*/
void __init smp_init_cpus(void)
{
void __iomem *scu_base = scu_base_addr();
unsigned int i, ncores;
ncores = scu_get_core_count(__io_address(UX500_SCU_BASE));
ncores = scu_base ? scu_get_core_count(scu_base) : 1;
/* sanity check */
if (ncores > NR_CPUS) {
......@@ -154,6 +175,6 @@ void __init platform_smp_prepare_cpus(unsigned int max_cpus)
for (i = 0; i < max_cpus; i++)
set_cpu_present(i, true);
scu_enable(__io_address(UX500_SCU_BASE));
scu_enable(scu_base_addr());
wakeup_secondary();
}
Markdown is supported
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment