Commit 91280e75 authored by Bartlomiej Zolnierkiewicz's avatar Bartlomiej Zolnierkiewicz Committed by Kukjin Kim
Browse files

ARM: EXYNOS: PL330 MDMA1 fix for revision 0 of Exynos4210 SOC

Commit 82145130

 ("ARM: EXYNOS: fix address for EXYNOS4 MDMA1")
changed EXYNOS specific setup of PL330 DMA engine to use 'non-secure'
mdma1 address instead of 'secure' one (from 0x12840000 to 0x12850000)
to fix issue with some Exynos4212 SOCs.  Unfortunately it brakes
PL330 setup for revision 0 of Exynos4210 SOC (mdma1 device cannot
be found at 'non-secure' address):

[    0.566245] dma-pl330 dma-pl330.2: PERIPH_ID 0x0, PCELL_ID 0x0 !
[    0.566278] dma-pl330: probe of dma-pl330.2 failed with error -22

Fix it by using 'secure' mdma1 address on Exynos4210 revision 0 SOC.
Reviewed-by: default avatarTomasz Figa <t.figa@samsung.com>
Signed-off-by: default avatarBartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: default avatarKyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: default avatarKukjin Kim <kgene.kim@samsung.com>
parent f4a75d2e
......@@ -275,6 +275,9 @@ static int __init exynos_dma_init(void)
exynos_pdma1_pdata.nr_valid_peri =
ARRAY_SIZE(exynos4210_pdma1_peri);
exynos_pdma1_pdata.peri_id = exynos4210_pdma1_peri;
if (samsung_rev() == EXYNOS4210_REV_0)
exynos_mdma1_device.res.start = EXYNOS4_PA_S_MDMA1;
} else if (soc_is_exynos4212() || soc_is_exynos4412()) {
exynos_pdma0_pdata.nr_valid_peri =
ARRAY_SIZE(exynos4212_pdma0_peri);
......
......@@ -90,6 +90,7 @@
#define EXYNOS4_PA_MDMA0 0x10810000
#define EXYNOS4_PA_MDMA1 0x12850000
#define EXYNOS4_PA_S_MDMA1 0x12840000
#define EXYNOS4_PA_PDMA0 0x12680000
#define EXYNOS4_PA_PDMA1 0x12690000
#define EXYNOS5_PA_MDMA0 0x10800000
......
Markdown is supported
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment