Commit 8e2813f5 authored by Jacob Keller's avatar Jacob Keller Committed by Jeff Kirsher
Browse files

ixgbe: check for WoL support in single function



This patch consolidates the case logic for checking whether a device supports
WoL into a single place. Previously ethtool and probe used similar logic that
was copied and maintained separately. This patch encapsulates the core logic
into a function so that a user only has to update one place.
Signed-off-by: default avatarJacob Keller <jacob.e.keller@intel.com>
Tested-by: default avatarStephen Ko <stephen.s.ko@intel.com>
Signed-off-by: default avatarJeff Kirsher <jeffrey.t.kirsher@intel.com>
parent a27416bb
......@@ -600,6 +600,8 @@ extern void ixgbe_disable_rx_queue(struct ixgbe_adapter *adapter,
struct ixgbe_ring *);
extern void ixgbe_update_stats(struct ixgbe_adapter *adapter);
extern int ixgbe_init_interrupt_scheme(struct ixgbe_adapter *adapter);
extern int ixgbe_wol_supported(struct ixgbe_adapter *adapter, u16 device_id,
u16 subdevice_id);
extern void ixgbe_clear_interrupt_scheme(struct ixgbe_adapter *adapter);
extern netdev_tx_t ixgbe_xmit_frame_ring(struct sk_buff *,
struct ixgbe_adapter *,
......
......@@ -1969,53 +1969,12 @@ static int ixgbe_wol_exclusion(struct ixgbe_adapter *adapter,
struct ethtool_wolinfo *wol)
{
struct ixgbe_hw *hw = &adapter->hw;
int retval = 1;
u16 wol_cap = adapter->eeprom_cap & IXGBE_DEVICE_CAPS_WOL_MASK;
/* WOL not supported except for the following */
switch(hw->device_id) {
case IXGBE_DEV_ID_82599_SFP:
/* Only these subdevices could supports WOL */
switch (hw->subsystem_device_id) {
case IXGBE_SUBDEV_ID_82599_560FLR:
/* only support first port */
if (hw->bus.func != 0) {
wol->supported = 0;
break;
}
case IXGBE_SUBDEV_ID_82599_SFP:
retval = 0;
break;
default:
wol->supported = 0;
break;
}
break;
case IXGBE_DEV_ID_82599_COMBO_BACKPLANE:
/* All except this subdevice support WOL */
if (hw->subsystem_device_id ==
IXGBE_SUBDEV_ID_82599_KX4_KR_MEZZ) {
wol->supported = 0;
break;
}
retval = 0;
break;
case IXGBE_DEV_ID_82599_KX4:
retval = 0;
break;
case IXGBE_DEV_ID_X540T:
/* check eeprom to see if enabled wol */
if ((wol_cap == IXGBE_DEVICE_CAPS_WOL_PORT0_1) ||
((wol_cap == IXGBE_DEVICE_CAPS_WOL_PORT0) &&
(hw->bus.func == 0))) {
retval = 0;
break;
}
int retval = 0;
/* All others not supported */
wol->supported = 0;
break;
default:
/* WOL not supported for all devices */
if (!ixgbe_wol_supported(adapter, hw->device_id,
hw->subsystem_device_id)) {
retval = 1;
wol->supported = 0;
}
......
......@@ -6598,7 +6598,7 @@ static netdev_features_t ixgbe_fix_features(struct net_device *netdev,
/* Turn off LRO if not RSC capable */
if (!(adapter->flags2 & IXGBE_FLAG2_RSC_CAPABLE))
features &= ~NETIF_F_LRO;
return features;
}
......@@ -6785,6 +6785,57 @@ static void __devinit ixgbe_probe_vf(struct ixgbe_adapter *adapter,
#endif /* CONFIG_PCI_IOV */
}
/**
* ixgbe_wol_supported - Check whether device supports WoL
* @hw: hw specific details
* @device_id: the device ID
* @subdev_id: the subsystem device ID
*
* This function is used by probe and ethtool to determine
* which devices have WoL support
*
**/
int ixgbe_wol_supported(struct ixgbe_adapter *adapter, u16 device_id,
u16 subdevice_id)
{
struct ixgbe_hw *hw = &adapter->hw;
u16 wol_cap = adapter->eeprom_cap & IXGBE_DEVICE_CAPS_WOL_MASK;
int is_wol_supported = 0;
switch (device_id) {
case IXGBE_DEV_ID_82599_SFP:
/* Only these subdevices could supports WOL */
switch (subdevice_id) {
case IXGBE_SUBDEV_ID_82599_560FLR:
/* only support first port */
if (hw->bus.func != 0)
break;
case IXGBE_SUBDEV_ID_82599_SFP:
is_wol_supported = 1;
break;
}
break;
case IXGBE_DEV_ID_82599_COMBO_BACKPLANE:
/* All except this subdevice support WOL */
if (subdevice_id != IXGBE_SUBDEV_ID_82599_KX4_KR_MEZZ)
is_wol_supported = 1;
break;
case IXGBE_DEV_ID_82599_KX4:
is_wol_supported = 1;
break;
case IXGBE_DEV_ID_X540T:
/* check eeprom to see if enabled wol */
if ((wol_cap == IXGBE_DEVICE_CAPS_WOL_PORT0_1) ||
((wol_cap == IXGBE_DEVICE_CAPS_WOL_PORT0) &&
(hw->bus.func == 0))) {
is_wol_supported = 1;
}
break;
}
return is_wol_supported;
}
/**
* ixgbe_probe - Device Initialization Routine
* @pdev: PCI device information struct
......@@ -6811,7 +6862,6 @@ static int __devinit ixgbe_probe(struct pci_dev *pdev,
u16 device_caps;
#endif
u32 eec;
u16 wol_cap;
/* Catch broken hardware that put the wrong VF device ID in
* the PCIe SR-IOV capability.
......@@ -7075,40 +7125,12 @@ static int __devinit ixgbe_probe(struct pci_dev *pdev,
netdev->features &= ~NETIF_F_RXHASH;
}
/* WOL not supported for all but the following */
/* WOL not supported for all devices */
adapter->wol = 0;
switch (pdev->device) {
case IXGBE_DEV_ID_82599_SFP:
/* Only these subdevice supports WOL */
switch (pdev->subsystem_device) {
case IXGBE_SUBDEV_ID_82599_560FLR:
/* only support first port */
if (hw->bus.func != 0)
break;
case IXGBE_SUBDEV_ID_82599_SFP:
adapter->wol = IXGBE_WUFC_MAG;
break;
}
break;
case IXGBE_DEV_ID_82599_COMBO_BACKPLANE:
/* All except this subdevice support WOL */
if (pdev->subsystem_device != IXGBE_SUBDEV_ID_82599_KX4_KR_MEZZ)
adapter->wol = IXGBE_WUFC_MAG;
break;
case IXGBE_DEV_ID_82599_KX4:
hw->eeprom.ops.read(hw, 0x2c, &adapter->eeprom_cap);
if (ixgbe_wol_supported(adapter, pdev->device, pdev->subsystem_device))
adapter->wol = IXGBE_WUFC_MAG;
break;
case IXGBE_DEV_ID_X540T:
/* Check eeprom to see if it is enabled */
hw->eeprom.ops.read(hw, 0x2c, &adapter->eeprom_cap);
wol_cap = adapter->eeprom_cap & IXGBE_DEVICE_CAPS_WOL_MASK;
if ((wol_cap == IXGBE_DEVICE_CAPS_WOL_PORT0_1) ||
((wol_cap == IXGBE_DEVICE_CAPS_WOL_PORT0) &&
(hw->bus.func == 0)))
adapter->wol = IXGBE_WUFC_MAG;
break;
}
device_set_wakeup_enable(&adapter->pdev->dev, adapter->wol);
/* save off EEPROM version number */
......
Supports Markdown
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment