Commit 8d7d1adc authored by Linus Torvalds's avatar Linus Torvalds
Browse files

Merge tag 'usb-3.4-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb

Pull USB fixes from Greg Kroah-Hartman:
 "Here are a number of small USB fixes for 3.4-rc5.

  Nothing major, as before, some USB gadget fixes.  There's a crash fix
  for a number of ASUS laptops on resume that had been reported by a
  number of different people.  We think the fix might also pertain to
  other machines, as this was a BIOS bug, and they seem to travel to
  different models and manufacturers quite easily.  Other than that,
  some other reported problems fixed as well."

* tag 'usb-3.4-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
  usb: gadget: udc-core: fix incompatibility with dummy-hcd
  usb: gadget: udc-core: fix wrong call order
  USB: cdc-wdm: fix race leading leading to memory corruption
  USB: EHCI: fix crash during suspend on ASUS computers
  usb gadget: uvc: uvc_request_data::length field must be signed
  usb: gadget: dummy: do not call pullup() on udc_stop()
  usb: musb: davinci.c: add missing unregister
  usb: musb: drop __deprecated flag
  USB: gadget: storage gadgets send wrong error code for unknown commands
  usb: otg: gpio_vbus: Add otg transceiver events and notifiers
parents f7b00693 41c8a48a
......@@ -157,8 +157,9 @@ static void wdm_out_callback(struct urb *urb)
spin_lock(&desc->iuspin);
desc->werr = urb->status;
spin_unlock(&desc->iuspin);
clear_bit(WDM_IN_USE, &desc->flags);
kfree(desc->outbuf);
desc->outbuf = NULL;
clear_bit(WDM_IN_USE, &desc->flags);
wake_up(&desc->wait);
}
......@@ -338,7 +339,7 @@ static ssize_t wdm_write
if (we < 0)
return -EIO;
desc->outbuf = buf = kmalloc(count, GFP_KERNEL);
buf = kmalloc(count, GFP_KERNEL);
if (!buf) {
rv = -ENOMEM;
goto outnl;
......@@ -406,10 +407,12 @@ static ssize_t wdm_write
req->wIndex = desc->inum;
req->wLength = cpu_to_le16(count);
set_bit(WDM_IN_USE, &desc->flags);
desc->outbuf = buf;
rv = usb_submit_urb(desc->command, GFP_KERNEL);
if (rv < 0) {
kfree(buf);
desc->outbuf = NULL;
clear_bit(WDM_IN_USE, &desc->flags);
dev_err(&desc->intf->dev, "Tx URB error: %d\n", rv);
} else {
......
......@@ -493,6 +493,15 @@ static int hcd_pci_suspend_noirq(struct device *dev)
pci_save_state(pci_dev);
/*
* Some systems crash if an EHCI controller is in D3 during
* a sleep transition. We have to leave such controllers in D0.
*/
if (hcd->broken_pci_sleep) {
dev_dbg(dev, "Staying in PCI D0\n");
return retval;
}
/* If the root hub is dead rather than suspended, disallow remote
* wakeup. usb_hc_died() should ensure that both hosts are marked as
* dying, so we only need to check the primary roothub.
......
......@@ -927,7 +927,6 @@ static int dummy_udc_stop(struct usb_gadget *g,
dum->driver = NULL;
dummy_pullup(&dum->gadget, 0);
return 0;
}
......
......@@ -2189,7 +2189,7 @@ unknown_cmnd:
common->data_size_from_cmnd = 0;
sprintf(unknown, "Unknown x%02x", common->cmnd[0]);
reply = check_command(common, common->cmnd_size,
DATA_DIR_UNKNOWN, 0xff, 0, unknown);
DATA_DIR_UNKNOWN, ~0, 0, unknown);
if (reply == 0) {
common->curlun->sense_data = SS_INVALID_COMMAND;
reply = -EINVAL;
......
......@@ -2579,7 +2579,7 @@ static int do_scsi_command(struct fsg_dev *fsg)
fsg->data_size_from_cmnd = 0;
sprintf(unknown, "Unknown x%02x", fsg->cmnd[0]);
if ((reply = check_command(fsg, fsg->cmnd_size,
DATA_DIR_UNKNOWN, 0xff, 0, unknown)) == 0) {
DATA_DIR_UNKNOWN, ~0, 0, unknown)) == 0) {
fsg->curlun->sense_data = SS_INVALID_COMMAND;
reply = -EINVAL;
}
......
......@@ -263,8 +263,8 @@ static void usb_gadget_remove_driver(struct usb_udc *udc)
if (udc_is_newstyle(udc)) {
udc->driver->disconnect(udc->gadget);
udc->driver->unbind(udc->gadget);
usb_gadget_disconnect(udc->gadget);
udc->driver->unbind(udc->gadget);
usb_gadget_udc_stop(udc->gadget, udc->driver);
} else {
usb_gadget_stop(udc->gadget, udc->driver);
......@@ -415,9 +415,9 @@ static ssize_t usb_udc_softconn_store(struct device *dev,
usb_gadget_udc_start(udc->gadget, udc->driver);
usb_gadget_connect(udc->gadget);
} else if (sysfs_streq(buf, "disconnect")) {
usb_gadget_disconnect(udc->gadget);
if (udc_is_newstyle(udc))
usb_gadget_udc_stop(udc->gadget, udc->driver);
usb_gadget_disconnect(udc->gadget);
} else {
dev_err(dev, "unsupported command '%s'\n", buf);
return -EINVAL;
......
......@@ -28,7 +28,7 @@
struct uvc_request_data
{
unsigned int length;
__s32 length;
__u8 data[60];
};
......
......@@ -39,7 +39,7 @@ uvc_send_response(struct uvc_device *uvc, struct uvc_request_data *data)
if (data->length < 0)
return usb_ep_set_halt(cdev->gadget->ep0);
req->length = min(uvc->event_length, data->length);
req->length = min_t(unsigned int, uvc->event_length, data->length);
req->zero = data->length < uvc->event_length;
req->dma = DMA_ADDR_INVALID;
......
......@@ -144,6 +144,14 @@ static int ehci_pci_setup(struct usb_hcd *hcd)
hcd->has_tt = 1;
tdi_reset(ehci);
}
if (pdev->subsystem_vendor == PCI_VENDOR_ID_ASUSTEK) {
/* EHCI #1 or #2 on 6 Series/C200 Series chipset */
if (pdev->device == 0x1c26 || pdev->device == 0x1c2d) {
ehci_info(ehci, "broken D3 during system sleep on ASUS\n");
hcd->broken_pci_sleep = 1;
device_set_wakeup_capable(&pdev->dev, false);
}
}
break;
case PCI_VENDOR_ID_TDI:
if (pdev->device == PCI_DEVICE_ID_TDI_EHCI) {
......
......@@ -386,7 +386,7 @@ static int davinci_musb_init(struct musb *musb)
usb_nop_xceiv_register();
musb->xceiv = usb_get_transceiver();
if (!musb->xceiv)
return -ENODEV;
goto unregister;
musb->mregs += DAVINCI_BASE_OFFSET;
......@@ -444,6 +444,7 @@ static int davinci_musb_init(struct musb *musb)
fail:
usb_put_transceiver(musb->xceiv);
unregister:
usb_nop_xceiv_unregister();
return -ENODEV;
}
......
......@@ -449,7 +449,7 @@ struct musb {
* We added this flag to forcefully disable double
* buffering until we get it working.
*/
unsigned double_buffer_not_ok:1 __deprecated;
unsigned double_buffer_not_ok:1;
struct musb_hdrc_config *config;
......
......@@ -96,7 +96,7 @@ static void gpio_vbus_work(struct work_struct *work)
struct gpio_vbus_data *gpio_vbus =
container_of(work, struct gpio_vbus_data, work);
struct gpio_vbus_mach_info *pdata = gpio_vbus->dev->platform_data;
int gpio;
int gpio, status;
if (!gpio_vbus->phy.otg->gadget)
return;
......@@ -108,7 +108,9 @@ static void gpio_vbus_work(struct work_struct *work)
*/
gpio = pdata->gpio_pullup;
if (is_vbus_powered(pdata)) {
status = USB_EVENT_VBUS;
gpio_vbus->phy.state = OTG_STATE_B_PERIPHERAL;
gpio_vbus->phy.last_event = status;
usb_gadget_vbus_connect(gpio_vbus->phy.otg->gadget);
/* drawing a "unit load" is *always* OK, except for OTG */
......@@ -117,6 +119,9 @@ static void gpio_vbus_work(struct work_struct *work)
/* optionally enable D+ pullup */
if (gpio_is_valid(gpio))
gpio_set_value(gpio, !pdata->gpio_pullup_inverted);
atomic_notifier_call_chain(&gpio_vbus->phy.notifier,
status, gpio_vbus->phy.otg->gadget);
} else {
/* optionally disable D+ pullup */
if (gpio_is_valid(gpio))
......@@ -125,7 +130,12 @@ static void gpio_vbus_work(struct work_struct *work)
set_vbus_draw(gpio_vbus, 0);
usb_gadget_vbus_disconnect(gpio_vbus->phy.otg->gadget);
status = USB_EVENT_NONE;
gpio_vbus->phy.state = OTG_STATE_B_IDLE;
gpio_vbus->phy.last_event = status;
atomic_notifier_call_chain(&gpio_vbus->phy.notifier,
status, gpio_vbus->phy.otg->gadget);
}
}
......@@ -287,6 +297,9 @@ static int __init gpio_vbus_probe(struct platform_device *pdev)
irq, err);
goto err_irq;
}
ATOMIC_INIT_NOTIFIER_HEAD(&gpio_vbus->phy.notifier);
INIT_WORK(&gpio_vbus->work, gpio_vbus_work);
gpio_vbus->vbus_draw = regulator_get(&pdev->dev, "vbus_draw");
......
......@@ -126,6 +126,8 @@ struct usb_hcd {
unsigned wireless:1; /* Wireless USB HCD */
unsigned authorized_default:1;
unsigned has_tt:1; /* Integrated TT in root hub */
unsigned broken_pci_sleep:1; /* Don't put the
controller in PCI-D3 for system sleep */
unsigned int irq; /* irq allocated */
void __iomem *regs; /* device memory/io */
......
Markdown is supported
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment