Commit 87450bd5 authored by Linus Torvalds's avatar Linus Torvalds
Browse files

Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  Input: matrix_keypad - increase the limit of rows and columns
  Input: wacom - fix error path in wacom_probe()
  Input: ads7846 - check proper condition when freeing gpio
  Revert "Input: do not pass injected events back to the originating handler"
  Input: sysrq - rework re-inject logic
  Input: serio - clear pending rescans after sysfs driver rebind
  Input: rotary_encoder - use proper irqflags
  Input: wacom_w8001 - report resolution to userland
parents 055d2194 cfaea567
......@@ -75,7 +75,6 @@ static int input_defuzz_abs_event(int value, int old_val, int fuzz)
* dev->event_lock held and interrupts disabled.
*/
static void input_pass_event(struct input_dev *dev,
struct input_handler *src_handler,
unsigned int type, unsigned int code, int value)
{
struct input_handler *handler;
......@@ -94,15 +93,6 @@ static void input_pass_event(struct input_dev *dev,
continue;
handler = handle->handler;
/*
* If this is the handler that injected this
* particular event we want to skip it to avoid
* filters firing again and again.
*/
if (handler == src_handler)
continue;
if (!handler->filter) {
if (filtered)
break;
......@@ -132,7 +122,7 @@ static void input_repeat_key(unsigned long data)
if (test_bit(dev->repeat_key, dev->key) &&
is_event_supported(dev->repeat_key, dev->keybit, KEY_MAX)) {
input_pass_event(dev, NULL, EV_KEY, dev->repeat_key, 2);
input_pass_event(dev, EV_KEY, dev->repeat_key, 2);
if (dev->sync) {
/*
......@@ -141,7 +131,7 @@ static void input_repeat_key(unsigned long data)
* Otherwise assume that the driver will send
* SYN_REPORT once it's done.
*/
input_pass_event(dev, NULL, EV_SYN, SYN_REPORT, 1);
input_pass_event(dev, EV_SYN, SYN_REPORT, 1);
}
if (dev->rep[REP_PERIOD])
......@@ -174,7 +164,6 @@ static void input_stop_autorepeat(struct input_dev *dev)
#define INPUT_PASS_TO_ALL (INPUT_PASS_TO_HANDLERS | INPUT_PASS_TO_DEVICE)
static int input_handle_abs_event(struct input_dev *dev,
struct input_handler *src_handler,
unsigned int code, int *pval)
{
bool is_mt_event;
......@@ -218,15 +207,13 @@ static int input_handle_abs_event(struct input_dev *dev,
/* Flush pending "slot" event */
if (is_mt_event && dev->slot != input_abs_get_val(dev, ABS_MT_SLOT)) {
input_abs_set_val(dev, ABS_MT_SLOT, dev->slot);
input_pass_event(dev, src_handler,
EV_ABS, ABS_MT_SLOT, dev->slot);
input_pass_event(dev, EV_ABS, ABS_MT_SLOT, dev->slot);
}
return INPUT_PASS_TO_HANDLERS;
}
static void input_handle_event(struct input_dev *dev,
struct input_handler *src_handler,
unsigned int type, unsigned int code, int value)
{
int disposition = INPUT_IGNORE_EVENT;
......@@ -279,8 +266,7 @@ static void input_handle_event(struct input_dev *dev,
case EV_ABS:
if (is_event_supported(code, dev->absbit, ABS_MAX))
disposition = input_handle_abs_event(dev, src_handler,
code, &value);
disposition = input_handle_abs_event(dev, code, &value);
break;
......@@ -338,7 +324,7 @@ static void input_handle_event(struct input_dev *dev,
dev->event(dev, type, code, value);
if (disposition & INPUT_PASS_TO_HANDLERS)
input_pass_event(dev, src_handler, type, code, value);
input_pass_event(dev, type, code, value);
}
/**
......@@ -367,7 +353,7 @@ void input_event(struct input_dev *dev,
spin_lock_irqsave(&dev->event_lock, flags);
add_input_randomness(type, code, value);
input_handle_event(dev, NULL, type, code, value);
input_handle_event(dev, type, code, value);
spin_unlock_irqrestore(&dev->event_lock, flags);
}
}
......@@ -397,8 +383,7 @@ void input_inject_event(struct input_handle *handle,
rcu_read_lock();
grab = rcu_dereference(dev->grab);
if (!grab || grab == handle)
input_handle_event(dev, handle->handler,
type, code, value);
input_handle_event(dev, type, code, value);
rcu_read_unlock();
spin_unlock_irqrestore(&dev->event_lock, flags);
......@@ -611,10 +596,10 @@ static void input_dev_release_keys(struct input_dev *dev)
for (code = 0; code <= KEY_MAX; code++) {
if (is_event_supported(code, dev->keybit, KEY_MAX) &&
__test_and_clear_bit(code, dev->key)) {
input_pass_event(dev, NULL, EV_KEY, code, 0);
input_pass_event(dev, EV_KEY, code, 0);
}
}
input_pass_event(dev, NULL, EV_SYN, SYN_REPORT, 1);
input_pass_event(dev, EV_SYN, SYN_REPORT, 1);
}
}
......@@ -889,9 +874,9 @@ int input_set_keycode(struct input_dev *dev,
!is_event_supported(old_keycode, dev->keybit, KEY_MAX) &&
__test_and_clear_bit(old_keycode, dev->key)) {
input_pass_event(dev, NULL, EV_KEY, old_keycode, 0);
input_pass_event(dev, EV_KEY, old_keycode, 0);
if (dev->sync)
input_pass_event(dev, NULL, EV_SYN, SYN_REPORT, 1);
input_pass_event(dev, EV_SYN, SYN_REPORT, 1);
}
out:
......
......@@ -176,7 +176,7 @@ static int __devinit rotary_encoder_probe(struct platform_device *pdev)
/* request the IRQs */
err = request_irq(encoder->irq_a, &rotary_encoder_irq,
IORESOURCE_IRQ_HIGHEDGE | IORESOURCE_IRQ_LOWEDGE,
IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
DRV_NAME, encoder);
if (err) {
dev_err(&pdev->dev, "unable to request IRQ %d\n",
......@@ -185,7 +185,7 @@ static int __devinit rotary_encoder_probe(struct platform_device *pdev)
}
err = request_irq(encoder->irq_b, &rotary_encoder_irq,
IORESOURCE_IRQ_HIGHEDGE | IORESOURCE_IRQ_LOWEDGE,
IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
DRV_NAME, encoder);
if (err) {
dev_err(&pdev->dev, "unable to request IRQ %d\n",
......
......@@ -188,7 +188,8 @@ static void serio_free_event(struct serio_event *event)
kfree(event);
}
static void serio_remove_duplicate_events(struct serio_event *event)
static void serio_remove_duplicate_events(void *object,
enum serio_event_type type)
{
struct serio_event *e, *next;
unsigned long flags;
......@@ -196,13 +197,13 @@ static void serio_remove_duplicate_events(struct serio_event *event)
spin_lock_irqsave(&serio_event_lock, flags);
list_for_each_entry_safe(e, next, &serio_event_list, node) {
if (event->object == e->object) {
if (object == e->object) {
/*
* If this event is of different type we should not
* look further - we only suppress duplicate events
* that were sent back-to-back.
*/
if (event->type != e->type)
if (type != e->type)
break;
list_del_init(&e->node);
......@@ -245,7 +246,7 @@ static void serio_handle_event(struct work_struct *work)
break;
}
serio_remove_duplicate_events(event);
serio_remove_duplicate_events(event->object, event->type);
serio_free_event(event);
}
......@@ -436,10 +437,12 @@ static ssize_t serio_rebind_driver(struct device *dev, struct device_attribute *
} else if (!strncmp(buf, "rescan", count)) {
serio_disconnect_port(serio);
serio_find_driver(serio);
serio_remove_duplicate_events(serio, SERIO_RESCAN_PORT);
} else if ((drv = driver_find(buf, &serio_bus)) != NULL) {
serio_disconnect_port(serio);
error = serio_bind_driver(serio, to_serio_driver(drv));
put_driver(drv);
serio_remove_duplicate_events(serio, SERIO_RESCAN_PORT);
} else {
error = -EINVAL;
}
......
......@@ -519,7 +519,7 @@ static int wacom_probe(struct usb_interface *intf, const struct usb_device_id *i
/* Retrieve the physical and logical size for OEM devices */
error = wacom_retrieve_hid_descriptor(intf, features);
if (error)
goto fail2;
goto fail3;
wacom_setup_device_quirks(features);
......
......@@ -941,28 +941,29 @@ static int __devinit ads7846_setup_pendown(struct spi_device *spi, struct ads784
struct ads7846_platform_data *pdata = spi->dev.platform_data;
int err;
/* REVISIT when the irq can be triggered active-low, or if for some
/*
* REVISIT when the irq can be triggered active-low, or if for some
* reason the touchscreen isn't hooked up, we don't need to access
* the pendown state.
*/
if (!pdata->get_pendown_state && !gpio_is_valid(pdata->gpio_pendown)) {
dev_err(&spi->dev, "no get_pendown_state nor gpio_pendown?\n");
return -EINVAL;
}
if (pdata->get_pendown_state) {
ts->get_pendown_state = pdata->get_pendown_state;
return 0;
}
} else if (gpio_is_valid(pdata->gpio_pendown)) {
err = gpio_request(pdata->gpio_pendown, "ads7846_pendown");
if (err) {
dev_err(&spi->dev, "failed to request pendown GPIO%d\n",
pdata->gpio_pendown);
return err;
}
err = gpio_request(pdata->gpio_pendown, "ads7846_pendown");
if (err) {
dev_err(&spi->dev, "failed to request pendown GPIO%d\n",
pdata->gpio_pendown);
return err;
}
ts->gpio_pendown = pdata->gpio_pendown;
ts->gpio_pendown = pdata->gpio_pendown;
} else {
dev_err(&spi->dev, "no get_pendown_state nor gpio_pendown?\n");
return -EINVAL;
}
return 0;
}
......@@ -1353,7 +1354,7 @@ static int __devinit ads7846_probe(struct spi_device *spi)
err_put_regulator:
regulator_put(ts->reg);
err_free_gpio:
if (ts->gpio_pendown != -1)
if (!ts->get_pendown_state)
gpio_free(ts->gpio_pendown);
err_cleanup_filter:
if (ts->filter_cleanup)
......@@ -1383,8 +1384,13 @@ static int __devexit ads7846_remove(struct spi_device *spi)
regulator_disable(ts->reg);
regulator_put(ts->reg);
if (ts->gpio_pendown != -1)
if (!ts->get_pendown_state) {
/*
* If we are not using specialized pendown method we must
* have been relying on gpio we set up ourselves.
*/
gpio_free(ts->gpio_pendown);
}
if (ts->filter_cleanup)
ts->filter_cleanup(ts->filter_data);
......
......@@ -51,6 +51,10 @@ MODULE_LICENSE("GPL");
#define W8001_PKTLEN_TPCCTL 11 /* control packet */
#define W8001_PKTLEN_TOUCH2FG 13
/* resolution in points/mm */
#define W8001_PEN_RESOLUTION 100
#define W8001_TOUCH_RESOLUTION 10
struct w8001_coord {
u8 rdy;
u8 tsw;
......@@ -198,7 +202,7 @@ static void parse_touchquery(u8 *data, struct w8001_touch_query *query)
query->y = 1024;
if (query->panel_res)
query->x = query->y = (1 << query->panel_res);
query->panel_res = 10;
query->panel_res = W8001_TOUCH_RESOLUTION;
}
}
......@@ -394,6 +398,8 @@ static int w8001_setup(struct w8001 *w8001)
input_set_abs_params(dev, ABS_X, 0, coord.x, 0, 0);
input_set_abs_params(dev, ABS_Y, 0, coord.y, 0, 0);
input_abs_set_res(dev, ABS_X, W8001_PEN_RESOLUTION);
input_abs_set_res(dev, ABS_Y, W8001_PEN_RESOLUTION);
input_set_abs_params(dev, ABS_PRESSURE, 0, coord.pen_pressure, 0, 0);
if (coord.tilt_x && coord.tilt_y) {
input_set_abs_params(dev, ABS_TILT_X, 0, coord.tilt_x, 0, 0);
......@@ -418,14 +424,17 @@ static int w8001_setup(struct w8001 *w8001)
w8001->max_touch_x = touch.x;
w8001->max_touch_y = touch.y;
/* scale to pen maximum */
if (w8001->max_pen_x && w8001->max_pen_y) {
/* if pen is supported scale to pen maximum */
touch.x = w8001->max_pen_x;
touch.y = w8001->max_pen_y;
touch.panel_res = W8001_PEN_RESOLUTION;
}
input_set_abs_params(dev, ABS_X, 0, touch.x, 0, 0);
input_set_abs_params(dev, ABS_Y, 0, touch.y, 0, 0);
input_abs_set_res(dev, ABS_X, touch.panel_res);
input_abs_set_res(dev, ABS_Y, touch.panel_res);
switch (touch.sensor_id) {
case 0:
......
......@@ -571,6 +571,7 @@ struct sysrq_state {
unsigned int alt_use;
bool active;
bool need_reinject;
bool reinjecting;
};
static void sysrq_reinject_alt_sysrq(struct work_struct *work)
......@@ -581,6 +582,10 @@ static void sysrq_reinject_alt_sysrq(struct work_struct *work)
unsigned int alt_code = sysrq->alt_use;
if (sysrq->need_reinject) {
/* we do not want the assignment to be reordered */
sysrq->reinjecting = true;
mb();
/* Simulate press and release of Alt + SysRq */
input_inject_event(handle, EV_KEY, alt_code, 1);
input_inject_event(handle, EV_KEY, KEY_SYSRQ, 1);
......@@ -589,6 +594,9 @@ static void sysrq_reinject_alt_sysrq(struct work_struct *work)
input_inject_event(handle, EV_KEY, KEY_SYSRQ, 0);
input_inject_event(handle, EV_KEY, alt_code, 0);
input_inject_event(handle, EV_SYN, SYN_REPORT, 1);
mb();
sysrq->reinjecting = false;
}
}
......@@ -599,6 +607,13 @@ static bool sysrq_filter(struct input_handle *handle,
bool was_active = sysrq->active;
bool suppress;
/*
* Do not filter anything if we are in the process of re-injecting
* Alt+SysRq combination.
*/
if (sysrq->reinjecting)
return false;
switch (type) {
case EV_SYN:
......@@ -629,7 +644,7 @@ static bool sysrq_filter(struct input_handle *handle,
sysrq->alt_use = sysrq->alt;
/*
* If nothing else will be pressed we'll need
* to * re-inject Alt-SysRq keysroke.
* to re-inject Alt-SysRq keysroke.
*/
sysrq->need_reinject = true;
}
......
......@@ -4,8 +4,8 @@
#include <linux/types.h>
#include <linux/input.h>
#define MATRIX_MAX_ROWS 16
#define MATRIX_MAX_COLS 16
#define MATRIX_MAX_ROWS 32
#define MATRIX_MAX_COLS 32
#define KEY(row, col, val) ((((row) & (MATRIX_MAX_ROWS - 1)) << 24) |\
(((col) & (MATRIX_MAX_COLS - 1)) << 16) |\
......
Supports Markdown
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment