Commit 859171ca authored by Joe Perches's avatar Joe Perches Committed by Greg Kroah-Hartman
Browse files

drivers/staging: Remove unnecessary semicolons


Signed-off-by: default avatarJoe Perches <joe@perches.com>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@suse.de>
parent ae0d9eba
......@@ -876,7 +876,7 @@ HIFAckInterrupt(HIF_DEVICE *device)
void
HIFUnMaskInterrupt(HIF_DEVICE *device)
{
int ret;;
int ret;
AR_DEBUG_ASSERT(device != NULL);
AR_DEBUG_ASSERT(device->func != NULL);
......
......@@ -4439,7 +4439,7 @@ skip_key:
for (i = assoc_req_ie_pos; i < assoc_req_ie_pos + assocReqLen - 4; i++) {
AR_DEBUG_PRINTF(ATH_DEBUG_WLAN_CONNECT,("%2.2x ", assocInfo[i]));
sprintf(pos, "%2.2x", assocInfo[i]);
pos += 2;;
pos += 2;
}
AR_DEBUG_PRINTF(ATH_DEBUG_WLAN_CONNECT,("\n"));
......
......@@ -236,7 +236,7 @@ usbbcm_device_probe(struct usb_interface *intf, const struct usb_device_id *id)
uint32_t uiNackZeroLengthInt=4;
if(wrmalt(psAdapter, DISABLE_USB_ZERO_LEN_INT, &uiNackZeroLengthInt, sizeof(uiNackZeroLengthInt)))
{
return -EIO;;
return -EIO;
}
}
......
......@@ -90,7 +90,7 @@ static void read_int_callback(struct urb *urb/*, struct pt_regs *regs*/)
BCM_DEBUG_PRINT(Adapter,DBG_TYPE_OTHERS, INTF_INIT, DBG_LVL_ALL,"Interrupt IN endPoint has got halted/stalled...need to clear this");
Adapter->bEndPointHalted = TRUE ;
wake_up(&Adapter->tx_packet_wait_queue);
urb->status = STATUS_SUCCESS ;;
urb->status = STATUS_SUCCESS ;
return;
}
/* software-driven interface shutdown */
......
......@@ -706,7 +706,7 @@ void SendIdleModeResponse(PMINI_ADAPTER Adapter)
/* Wake the LED Thread with IDLEMODE_ENTER State */
Adapter->DriverState = LOWPOWER_MODE_ENTER;
BCM_DEBUG_PRINT(Adapter,DBG_TYPE_RX, RX_DPC, DBG_LVL_ALL,"LED Thread is Running..Hence Setting LED Event as IDLEMODE_ENTER jiffies:%ld",jiffies);;
BCM_DEBUG_PRINT(Adapter,DBG_TYPE_RX, RX_DPC, DBG_LVL_ALL,"LED Thread is Running..Hence Setting LED Event as IDLEMODE_ENTER jiffies:%ld",jiffies);
wake_up(&Adapter->LEDInfo.notify_led_event);
/* Wait for 1 SEC for LED to OFF */
......@@ -1277,7 +1277,7 @@ static int bcm_parse_target_params(PMINI_ADAPTER Adapter)
void beceem_parse_target_struct(PMINI_ADAPTER Adapter)
{
UINT uiHostDrvrCfg6 =0, uiEEPROMFlag = 0;;
UINT uiHostDrvrCfg6 =0, uiEEPROMFlag = 0;
if(ntohl(Adapter->pstargetparams->m_u32PhyParameter2) & AUTO_SYNC_DISABLE)
{
......
......@@ -1008,7 +1008,7 @@ int i_APCI1710_InsnWriteEnableDisableTorCounter(struct comedi_device *dev,
b_ExternGate = (unsigned char) data[3];
b_CycleMode = (unsigned char) data[4];
b_InterruptEnable = (unsigned char) data[5];
i_ReturnValue = insn->n;;
i_ReturnValue = insn->n;
devpriv->tsk_Current = current; /* Save the current process task structure */
/**************************/
/* Test the module number */
......
......@@ -2850,7 +2850,7 @@ static int i_APCI1500_Reset(struct comedi_device *dev)
i_Logic = 0;
i_CounterLogic = 0;
i_InterruptMask = 0;
i_InputChannel = 0;;
i_InputChannel = 0;
i_TimerCounter1Enabled = 0;
i_TimerCounter2Enabled = 0;
i_WatchdogCounter3Enabled = 0;
......
......@@ -335,7 +335,7 @@ int i_APCI1516_WriteDigitalOutput(struct comedi_device *dev, struct comedi_subde
return -EINVAL;
} /* if else data[3]==1) */
} /* if else data[3]==0) */
return (insn->n);;
return (insn->n);
}
/*
......
......@@ -339,7 +339,7 @@ int i_APCI3501_ConfigAnalogOutput(struct comedi_device *dev, struct comedi_subde
int i_APCI3501_WriteAnalogOutput(struct comedi_device *dev, struct comedi_subdevice *s,
struct comedi_insn *insn, unsigned int *data)
{
unsigned int ul_Command1 = 0, ul_Channel_no, ul_Polarity, ul_DAC_Ready = 0;;
unsigned int ul_Command1 = 0, ul_Channel_no, ul_Polarity, ul_DAC_Ready = 0;
ul_Channel_no = CR_CHAN(insn->chanspec);
......
......@@ -971,7 +971,7 @@ static int pci230_attach(struct comedi_device *dev, struct comedi_devconfig *it)
if (thisboard->ao_chans > 0) {
s->type = COMEDI_SUBD_AO;
s->subdev_flags = SDF_WRITABLE | SDF_GROUND;
s->n_chan = thisboard->ao_chans;;
s->n_chan = thisboard->ao_chans;
s->maxdata = (1 << thisboard->ao_bits) - 1;
s->range_table = &pci230_ao_range;
s->insn_write = &pci230_ao_winsn;
......
......@@ -169,7 +169,7 @@ static int das16cs_attach(struct comedi_device *dev,
if (!link)
return -EIO;
dev->iobase = link->resource[0]->start;;
dev->iobase = link->resource[0]->start;
printk("I/O base=0x%04lx ", dev->iobase);
printk("fingerprint:\n");
......
......@@ -370,7 +370,7 @@ static int doDevConfig(struct comedi_device *dev, struct comedi_devconfig *it)
struct comedi_device *devs_opened[COMEDI_NUM_BOARD_MINORS];
memset(devs_opened, 0, sizeof(devs_opened));
devpriv->name[0] = 0;;
devpriv->name[0] = 0;
/* Loop through all comedi devices specified on the command-line,
building our device list */
for (i = 0; i < COMEDI_NDEVCONFOPTS && (!i || it->options[i]); ++i) {
......
......@@ -1711,7 +1711,7 @@ enum BC_STATUS crystalhd_download_fw(struct crystalhd_adp *adp, void *buffer, ui
}
BCMLOG(BCMLOG_INFO, "Firmware Downloaded Successfully\n");
return BC_STS_SUCCESS;;
return BC_STS_SUCCESS;
}
enum BC_STATUS crystalhd_do_fw_cmd(struct crystalhd_hw *hw,
......
......@@ -624,7 +624,7 @@ struct go7007 *go7007_alloc(struct go7007_board_info *board, struct device *dev)
go->dvd_mode = 0;
go->interlace_coding = 0;
for (i = 0; i < 4; ++i)
go->modet[i].enable = 0;;
go->modet[i].enable = 0;
for (i = 0; i < 1624; ++i)
go->modet_map[i] = 0;
go->audio_deliver = NULL;
......
......@@ -517,7 +517,7 @@ int lis3l02dq_configure_ring(struct iio_dev *indio_dev)
ret = iio_alloc_pollfunc(indio_dev, NULL, &lis3l02dq_poll_func_th);
if (ret)
goto error_iio_sw_rb_free;;
goto error_iio_sw_rb_free;
indio_dev->modes |= INDIO_RING_TRIGGERED;
return 0;
......
......@@ -173,9 +173,9 @@ static int sst_get_sfreq(struct snd_sst_params *str_param)
case SST_CODEC_TYPE_MP3:
return str_param->sparams.uc.mp3_params.sfreq;
case SST_CODEC_TYPE_AAC:
return str_param->sparams.uc.aac_params.sfreq;;
return str_param->sparams.uc.aac_params.sfreq;
case SST_CODEC_TYPE_WMA9:
return str_param->sparams.uc.wma_params.sfreq;;
return str_param->sparams.uc.wma_params.sfreq;
default:
return 0;
}
......
......@@ -153,9 +153,9 @@ int Media_D_ReadSector(struct us_data *us, DWORD start,WORD count,BYTE *buf)
WORD len, bn;
//if (Check_D_MediaPower()) ; b 6250 don't care
// return(ErrCode); ;
// return(ErrCode);
//if (Check_D_MediaFmt(fdoExt)) ;
// return(ErrCode); ;
// return(ErrCode);
if (Conv_D_MediaAddr(us, start))
return(ErrCode);
......
......@@ -763,8 +763,8 @@ int Ssfdc_D_WriteSectForCopy(struct us_data *us, BYTE *buf, BYTE *redundant)
bcb->CDB[7] = (BYTE)addr;
bcb->CDB[6] = (BYTE)(addr/0x0100);
bcb->CDB[5] = Media.Zone/2;
bcb->CDB[8] = *(redundant+REDT_ADDR1H);;
bcb->CDB[9] = *(redundant+REDT_ADDR1L);;
bcb->CDB[8] = *(redundant+REDT_ADDR1H);
bcb->CDB[9] = *(redundant+REDT_ADDR1L);
result = ENE_SendScsiCmd(us, FDIR_WRITE, buf, 0);
if (result != USB_STOR_XFER_GOOD)
......
......@@ -77,7 +77,7 @@ static void toshiba_spi_write(char cmd, uint32 data, int num)
/* followed by parameter bytes */
if (num) {
bp = (char *)&data;;
bp = (char *)&data;
bp += (num - 1);
while (num) {
toshiba_spi_write_byte(1, *bp);
......
......@@ -137,7 +137,7 @@ u16 RtmpPCI_WriteSingleTxResource(struct rt_rtmp_adapter *pAd,
pTxD->SDPtr0 = BufBasePaLow;
pTxD->SDLen0 = TXINFO_SIZE + TXWI_SIZE + hwHeaderLen; /* include padding */
pTxD->SDPtr1 = PCI_MAP_SINGLE(pAd, pTxBlk, 0, 1, PCI_DMA_TODEVICE);;
pTxD->SDPtr1 = PCI_MAP_SINGLE(pAd, pTxBlk, 0, 1, PCI_DMA_TODEVICE);
pTxD->SDLen1 = pTxBlk->SrcBufLen;
pTxD->LastSec0 = 0;
pTxD->LastSec1 = (bIsLast) ? 1 : 0;
......@@ -215,7 +215,7 @@ u16 RtmpPCI_WriteMultiTxResource(struct rt_rtmp_adapter *pAd,
pTxD->SDPtr0 = BufBasePaLow;
pTxD->SDLen0 = firstDMALen; /* include padding */
pTxD->SDPtr1 = PCI_MAP_SINGLE(pAd, pTxBlk, 0, 1, PCI_DMA_TODEVICE);;
pTxD->SDPtr1 = PCI_MAP_SINGLE(pAd, pTxBlk, 0, 1, PCI_DMA_TODEVICE);
pTxD->SDLen1 = pTxBlk->SrcBufLen;
pTxD->LastSec0 = 0;
pTxD->LastSec1 = (bIsLast) ? 1 : 0;
......
Markdown is supported
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment