Commit 828621dd authored by R.Marek@sh.cvut.cz's avatar R.Marek@sh.cvut.cz Committed by Greg Kroah-Hartman
Browse files

[PATCH] I2C: documentation update 3/3



This patch adds information about available userspace utillities
for system health monitoring drivers.
Signed-off-by: default avatarRudolf Marek <r.marek@sh.cvut.cz>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@suse.de>
parent 7f15b664
Introduction
------------
Most mainboards have sensor chips to monitor system health (like temperatures,
voltages, fans speed). They are often connected through an I2C bus, but some
are also connected directly through the ISA bus.
The kernel drivers make the data from the sensor chips available in the /sys
virtual filesystem. Userspace tools are then used to display or set or the
data in a more friendly manner.
Lm-sensors
----------
Core set of utilites that will allow you to obtain health information,
setup monitoring limits etc. You can get them on their homepage
http://www.lm-sensors.nu/ or as a package from your Linux distribution.
If from website:
Get lmsensors from project web site. Please note, you need only userspace
part, so compile with "make user_install" target.
General hints to get things working:
0) get lm-sensors userspace utils
1) compile all drivers in I2C section as modules in your kernel
2) run sensors-detect script, it will tell you what modules you need to load.
3) load them and run "sensors" command, you should see some results.
4) fix sensors.conf, labels, limits, fan divisors
5) if any more problems consult FAQ, or documentation
Other utilites
--------------
If you want some graphical indicators of system health look for applications
like: gkrellm, ksensors, xsensors, wmtemp, wmsensors, wmgtemp, ksysguardd,
hardware-monitor
If you are server administrator you can try snmpd or mrtgutils.
Supports Markdown
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment