Commit 823e1d90 authored by Yuval Mintz's avatar Yuval Mintz Committed by David S. Miller
Browse files

bnx2x: improve stop-on-error



Get better control over interrupts during panic, and allow FW to
test outgoing Tx packets when stop-on-error is allowed.

Signed-off-by: default avatarYuval Mintz <yuvalmin@broadcom.com>
Signed-off-by: default avatarAriel Elior <ariele@broadcom.com>
Signed-off-by: default avatarEilon Greenstein <eilong@broadcom.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parent 07ba6af4
......@@ -123,20 +123,18 @@ do { \
} while (0)
#ifdef BNX2X_STOP_ON_ERROR
void bnx2x_int_disable(struct bnx2x *bp);
#define bnx2x_panic() \
do { \
bp->panic = 1; \
BNX2X_ERR("driver assert\n"); \
bnx2x_int_disable(bp); \
bnx2x_panic_dump(bp); \
bnx2x_panic_dump(bp, true); \
} while (0)
#else
#define bnx2x_panic() \
do { \
bp->panic = 1; \
BNX2X_ERR("driver assert\n"); \
bnx2x_panic_dump(bp); \
bnx2x_panic_dump(bp, false); \
} while (0)
#endif
......
......@@ -3535,13 +3535,17 @@ netdev_tx_t bnx2x_start_xmit(struct sk_buff *skb, struct net_device *dev)
/* when transmitting in a vf, start bd must hold the ethertype
* for fw to enforce it
*/
#ifndef BNX2X_STOP_ON_ERROR
if (IS_VF(bp)) {
#endif
tx_start_bd->vlan_or_ethertype =
cpu_to_le16(ntohs(eth->h_proto));
#ifndef BNX2X_STOP_ON_ERROR
} else {
/* used by FW for packet accounting */
tx_start_bd->vlan_or_ethertype = cpu_to_le16(pkt_prod);
}
#endif
}
/* turn on parsing and get a BD */
......
......@@ -479,7 +479,7 @@ int bnx2x_set_power_state(struct bnx2x *bp, pci_power_t state);
*/
void bnx2x_update_max_mf_config(struct bnx2x *bp, u32 value);
/* Error handling */
void bnx2x_panic_dump(struct bnx2x *bp);
void bnx2x_panic_dump(struct bnx2x *bp, bool disable_int);
void bnx2x_fw_dump_lvl(struct bnx2x *bp, const char *lvl);
......
......@@ -2720,10 +2720,6 @@ static void bnx2x_self_test(struct net_device *dev,
buf[2] = 1;
etest->flags |= ETH_TEST_FL_FAILED;
}
#ifdef BNX2X_EXTRA_DEBUG
bnx2x_panic_dump(bp);
#endif
}
#define IS_PORT_STAT(i) \
......
......@@ -802,7 +802,71 @@ static void bnx2x_fw_dump(struct bnx2x *bp)
bnx2x_fw_dump_lvl(bp, KERN_ERR);
}
void bnx2x_panic_dump(struct bnx2x *bp)
static void bnx2x_hc_int_disable(struct bnx2x *bp)
{
int port = BP_PORT(bp);
u32 addr = port ? HC_REG_CONFIG_1 : HC_REG_CONFIG_0;
u32 val = REG_RD(bp, addr);
/* in E1 we must use only PCI configuration space to disable
* MSI/MSIX capablility
* It's forbitten to disable IGU_PF_CONF_MSI_MSIX_EN in HC block
*/
if (CHIP_IS_E1(bp)) {
/* Since IGU_PF_CONF_MSI_MSIX_EN still always on
* Use mask register to prevent from HC sending interrupts
* after we exit the function
*/
REG_WR(bp, HC_REG_INT_MASK + port*4, 0);
val &= ~(HC_CONFIG_0_REG_SINGLE_ISR_EN_0 |
HC_CONFIG_0_REG_INT_LINE_EN_0 |
HC_CONFIG_0_REG_ATTN_BIT_EN_0);
} else
val &= ~(HC_CONFIG_0_REG_SINGLE_ISR_EN_0 |
HC_CONFIG_0_REG_MSI_MSIX_INT_EN_0 |
HC_CONFIG_0_REG_INT_LINE_EN_0 |
HC_CONFIG_0_REG_ATTN_BIT_EN_0);
DP(NETIF_MSG_IFDOWN,
"write %x to HC %d (addr 0x%x)\n",
val, port, addr);
/* flush all outstanding writes */
mmiowb();
REG_WR(bp, addr, val);
if (REG_RD(bp, addr) != val)
BNX2X_ERR("BUG! proper val not read from IGU!\n");
}
static void bnx2x_igu_int_disable(struct bnx2x *bp)
{
u32 val = REG_RD(bp, IGU_REG_PF_CONFIGURATION);
val &= ~(IGU_PF_CONF_MSI_MSIX_EN |
IGU_PF_CONF_INT_LINE_EN |
IGU_PF_CONF_ATTN_BIT_EN);
DP(NETIF_MSG_IFDOWN, "write %x to IGU\n", val);
/* flush all outstanding writes */
mmiowb();
REG_WR(bp, IGU_REG_PF_CONFIGURATION, val);
if (REG_RD(bp, IGU_REG_PF_CONFIGURATION) != val)
BNX2X_ERR("BUG! proper val not read from IGU!\n");
}
static void bnx2x_int_disable(struct bnx2x *bp)
{
if (bp->common.int_block == INT_BLOCK_HC)
bnx2x_hc_int_disable(bp);
else
bnx2x_igu_int_disable(bp);
}
void bnx2x_panic_dump(struct bnx2x *bp, bool disable_int)
{
int i;
u16 j;
......@@ -812,6 +876,8 @@ void bnx2x_panic_dump(struct bnx2x *bp)
u16 start = 0, end = 0;
u8 cos;
#endif
if (disable_int)
bnx2x_int_disable(bp);
bp->stats_state = STATS_STATE_DISABLED;
bp->eth_stats.unrecoverable_error++;
......@@ -1527,71 +1593,6 @@ void bnx2x_int_enable(struct bnx2x *bp)
bnx2x_igu_int_enable(bp);
}
static void bnx2x_hc_int_disable(struct bnx2x *bp)
{
int port = BP_PORT(bp);
u32 addr = port ? HC_REG_CONFIG_1 : HC_REG_CONFIG_0;
u32 val = REG_RD(bp, addr);
/*
* in E1 we must use only PCI configuration space to disable
* MSI/MSIX capablility
* It's forbitten to disable IGU_PF_CONF_MSI_MSIX_EN in HC block
*/
if (CHIP_IS_E1(bp)) {
/* Since IGU_PF_CONF_MSI_MSIX_EN still always on
* Use mask register to prevent from HC sending interrupts
* after we exit the function
*/
REG_WR(bp, HC_REG_INT_MASK + port*4, 0);
val &= ~(HC_CONFIG_0_REG_SINGLE_ISR_EN_0 |
HC_CONFIG_0_REG_INT_LINE_EN_0 |
HC_CONFIG_0_REG_ATTN_BIT_EN_0);
} else
val &= ~(HC_CONFIG_0_REG_SINGLE_ISR_EN_0 |
HC_CONFIG_0_REG_MSI_MSIX_INT_EN_0 |
HC_CONFIG_0_REG_INT_LINE_EN_0 |
HC_CONFIG_0_REG_ATTN_BIT_EN_0);
DP(NETIF_MSG_IFDOWN,
"write %x to HC %d (addr 0x%x)\n",
val, port, addr);
/* flush all outstanding writes */
mmiowb();
REG_WR(bp, addr, val);
if (REG_RD(bp, addr) != val)
BNX2X_ERR("BUG! proper val not read from IGU!\n");
}
static void bnx2x_igu_int_disable(struct bnx2x *bp)
{
u32 val = REG_RD(bp, IGU_REG_PF_CONFIGURATION);
val &= ~(IGU_PF_CONF_MSI_MSIX_EN |
IGU_PF_CONF_INT_LINE_EN |
IGU_PF_CONF_ATTN_BIT_EN);
DP(NETIF_MSG_IFDOWN, "write %x to IGU\n", val);
/* flush all outstanding writes */
mmiowb();
REG_WR(bp, IGU_REG_PF_CONFIGURATION, val);
if (REG_RD(bp, IGU_REG_PF_CONFIGURATION) != val)
BNX2X_ERR("BUG! proper val not read from IGU!\n");
}
static void bnx2x_int_disable(struct bnx2x *bp)
{
if (bp->common.int_block == INT_BLOCK_HC)
bnx2x_hc_int_disable(bp);
else
bnx2x_igu_int_disable(bp);
}
void bnx2x_int_disable_sync(struct bnx2x *bp, int disable_hw)
{
int msix = (bp->flags & USING_MSIX_FLAG) ? 1 : 0;
......@@ -2945,6 +2946,10 @@ static unsigned long bnx2x_get_common_flags(struct bnx2x *bp,
__set_bit(BNX2X_Q_FLG_ZERO_STATS, &flags);
#ifdef BNX2X_STOP_ON_ERROR
__set_bit(BNX2X_Q_FLG_TX_SEC, &flags);
#endif
return flags;
}
......@@ -4765,7 +4770,7 @@ static int bnx2x_cnic_handle_cfc_del(struct bnx2x *bp, u32 cid,
BNX2X_ERR("got delete ramrod for CNIC CID %d with error!\n",
cid);
bnx2x_panic_dump(bp);
bnx2x_panic_dump(bp, false);
}
bnx2x_cnic_cfc_comp(bp, cid, err);
return 0;
......
Supports Markdown
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment