Commit 7962024e authored by Sreenivasa Honnur's avatar Sreenivasa Honnur Committed by Jeff Garzik

S2io: Check for register initialization completion before accesing device registers

- Making sure register initialisation is complete before proceeding further.
  The driver must wait until initialization is complete before attempting to
  access any other device registers.
Signed-off-by: default avatarSurjit Reang <surjit.reang@neterion.com>
Signed-off-by: default avatarSreenivasa Honnur <sreenivasa.honnur@neterion.com>
Signed-off-by: default avatarJeff Garzik <jeff@garzik.org>
parent 17cf803a
......@@ -66,6 +66,7 @@ struct XENA_dev_config {
#define ADAPTER_STATUS_RC_PRC_QUIESCENT vBIT(0xFF,16,8)
#define ADAPTER_STATUS_MC_DRAM_READY s2BIT(24)
#define ADAPTER_STATUS_MC_QUEUES_READY s2BIT(25)
#define ADAPTER_STATUS_RIC_RUNNING s2BIT(26)
#define ADAPTER_STATUS_M_PLL_LOCK s2BIT(30)
#define ADAPTER_STATUS_P_PLL_LOCK s2BIT(31)
......
......@@ -84,7 +84,7 @@
#include "s2io.h"
#include "s2io-regs.h"
#define DRV_VERSION "2.0.26.6"
#define DRV_VERSION "2.0.26.10"
/* S2io Driver name & version. */
static char s2io_driver_name[] = "Neterion";
......@@ -1100,6 +1100,20 @@ static int init_nic(struct s2io_nic *nic)
msleep(500);
val64 = readq(&bar0->sw_reset);
/* Ensure that it's safe to access registers by checking
* RIC_RUNNING bit is reset. Check is valid only for XframeII.
*/
if (nic->device_type == XFRAME_II_DEVICE) {
for (i = 0; i < 50; i++) {
val64 = readq(&bar0->adapter_status);
if (!(val64 & ADAPTER_STATUS_RIC_RUNNING))
break;
msleep(10);
}
if (i == 50)
return -ENODEV;
}
/* Enable Receiving broadcasts */
add = &bar0->mac_cfg;
val64 = readq(&bar0->mac_cfg);
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment