Commit 70d6d9db authored by Rob Landley's avatar Rob Landley Committed by Linus Torvalds

Add section IDs to mtdnand.tmpl

Add section IDs to mtdnand.tmpl
Signed-off-by: default avatarRob Landley <rob@landley.net>
Cc: "Randy.Dunlap" <rdunlap@xenotime.net>
Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
parent 90ad38b7
......@@ -80,7 +80,7 @@
struct member has a short description which is marked with an [XXX] identifier.
The following chapters explain the meaning of those identifiers.
</para>
<sect1>
<sect1 id="Function_identifiers_XXX">
<title>Function identifiers [XXX]</title>
<para>
The functions are marked with [XXX] identifiers in the short
......@@ -115,7 +115,7 @@
</para></listitem>
</itemizedlist>
</sect1>
<sect1>
<sect1 id="Struct_member_identifiers_XXX">
<title>Struct member identifiers [XXX]</title>
<para>
The struct members are marked with [XXX] identifiers in the
......@@ -159,7 +159,7 @@
basic functions and fill out some really board dependent
members in the nand chip description structure.
</para>
<sect1>
<sect1 id="Basic_defines">
<title>Basic defines</title>
<para>
At least you have to provide a mtd structure and
......@@ -185,7 +185,7 @@ static struct nand_chip board_chip;
static unsigned long baseaddr;
</programlisting>
</sect1>
<sect1>
<sect1 id="Partition_defines">
<title>Partition defines</title>
<para>
If you want to divide your device into partitions, then
......@@ -204,7 +204,7 @@ static struct mtd_partition partition_info[] = {
};
</programlisting>
</sect1>
<sect1>
<sect1 id="Hardware_control_functions">
<title>Hardware control function</title>
<para>
The hardware control function provides access to the
......@@ -246,7 +246,7 @@ static void board_hwcontrol(struct mtd_info *mtd, int cmd)
}
</programlisting>
</sect1>
<sect1>
<sect1 id="Device_ready_function">
<title>Device ready function</title>
<para>
If the hardware interface has the ready busy pin of the NAND chip connected to a
......@@ -257,7 +257,7 @@ static void board_hwcontrol(struct mtd_info *mtd, int cmd)
the function must not be defined and the function pointer this->dev_ready is set to NULL.
</para>
</sect1>
<sect1>
<sect1 id="Init_function">
<title>Init function</title>
<para>
The init function allocates memory and sets up all the board
......@@ -325,7 +325,7 @@ out:
module_init(board_init);
</programlisting>
</sect1>
<sect1>
<sect1 id="Exit_function">
<title>Exit function</title>
<para>
The exit function is only neccecary if the driver is
......@@ -359,7 +359,7 @@ module_exit(board_cleanup);
driver. For a list of functions which can be overridden by the board
driver see the documentation of the nand_chip structure.
</para>
<sect1>
<sect1 id="Multiple_chip_control">
<title>Multiple chip control</title>
<para>
The nand driver can control chip arrays. Therefor the
......@@ -419,9 +419,9 @@ static void board_select_chip (struct mtd_info *mtd, int chip)
}
</programlisting>
</sect1>
<sect1>
<sect1 id="Hardware_ECC_support">
<title>Hardware ECC support</title>
<sect2>
<sect2 id="Functions_and_constants">
<title>Functions and constants</title>
<para>
The nand driver supports three different types of
......@@ -475,7 +475,7 @@ static void board_select_chip (struct mtd_info *mtd, int chip)
</itemizedlist>
</para>
</sect2>
<sect2>
<sect2 id="Hardware_ECC_with_syndrome_calculation">
<title>Hardware ECC with syndrome calculation</title>
<para>
Many hardware ECC implementations provide Reed-Solomon
......@@ -500,7 +500,7 @@ static void board_select_chip (struct mtd_info *mtd, int chip)
</para>
</sect2>
</sect1>
<sect1>
<sect1 id="Bad_Block_table_support">
<title>Bad block table support</title>
<para>
Most NAND chips mark the bad blocks at a defined
......@@ -552,7 +552,7 @@ static void board_select_chip (struct mtd_info *mtd, int chip)
allows faster access than always checking the
bad block information on the flash chip itself.
</para>
<sect2>
<sect2 id="Flash_based_tables">
<title>Flash based tables</title>
<para>
It may be desired or neccecary to keep a bad block table in FLASH.
......@@ -587,7 +587,7 @@ static void board_select_chip (struct mtd_info *mtd, int chip)
</itemizedlist>
</para>
</sect2>
<sect2>
<sect2 id="User_defined_tables">
<title>User defined tables</title>
<para>
User defined tables are created by filling out a
......@@ -676,7 +676,7 @@ static void board_select_chip (struct mtd_info *mtd, int chip)
</para>
</sect2>
</sect1>
<sect1>
<sect1 id="Spare_area_placement">
<title>Spare area (auto)placement</title>
<para>
The nand driver implements different possibilities for
......@@ -730,7 +730,7 @@ struct nand_oobinfo {
</para></listitem>
</itemizedlist>
</para>
<sect2>
<sect2 id="Placement_defined_by_fs_driver">
<title>Placement defined by fs driver</title>
<para>
The calling function provides a pointer to a nand_oobinfo
......@@ -760,7 +760,7 @@ struct nand_oobinfo {
done according to the given scheme in the nand_oobinfo structure.
</para>
</sect2>
<sect2>
<sect2 id="Automatic_placement">
<title>Automatic placement</title>
<para>
Automatic placement uses the built in defaults to place the
......@@ -774,7 +774,7 @@ struct nand_oobinfo {
done according to the default builtin scheme.
</para>
</sect2>
<sect2>
<sect2 id="User_space_placement_selection">
<title>User space placement selection</title>
<para>
All non ecc functions like mtd->read and mtd->write use an internal
......@@ -789,9 +789,9 @@ struct nand_oobinfo {
</para>
</sect2>
</sect1>
<sect1>
<sect1 id="Spare_area_autoplacement_default">
<title>Spare area autoplacement default schemes</title>
<sect2>
<sect2 id="pagesize_256">
<title>256 byte pagesize</title>
<informaltable><tgroup cols="3"><tbody>
<row>
......@@ -843,7 +843,7 @@ pages this byte is reserved</entry>
</row>
</tbody></tgroup></informaltable>
</sect2>
<sect2>
<sect2 id="pagesize_512">
<title>512 byte pagesize</title>
<informaltable><tgroup cols="3"><tbody>
<row>
......@@ -906,7 +906,7 @@ in this page</entry>
</row>
</tbody></tgroup></informaltable>
</sect2>
<sect2>
<sect2 id="pagesize_2048">
<title>2048 byte pagesize</title>
<informaltable><tgroup cols="3"><tbody>
<row>
......@@ -1126,9 +1126,9 @@ in this page</entry>
<para>
This chapter describes the constants which might be relevant for a driver developer.
</para>
<sect1>
<sect1 id="Chip_option_constants">
<title>Chip option constants</title>
<sect2>
<sect2 id="Constants_for_chip_id_table">
<title>Constants for chip id table</title>
<para>
These constants are defined in nand.h. They are ored together to describe
......@@ -1153,7 +1153,7 @@ in this page</entry>
</programlisting>
</para>
</sect2>
<sect2>
<sect2 id="Constants_for_runtime_options">
<title>Constants for runtime options</title>
<para>
These constants are defined in nand.h. They are ored together to describe
......@@ -1171,7 +1171,7 @@ in this page</entry>
</sect2>
</sect1>
<sect1>
<sect1 id="EEC_selection_constants">
<title>ECC selection constants</title>
<para>
Use these constants to select the ECC algorithm.
......@@ -1192,7 +1192,7 @@ in this page</entry>
</para>
</sect1>
<sect1>
<sect1 id="Hardware_control_related_constants">
<title>Hardware control related constants</title>
<para>
These constants describe the requested hardware access function when
......@@ -1218,7 +1218,7 @@ in this page</entry>
</para>
</sect1>
<sect1>
<sect1 id="Bad_block_table_constants">
<title>Bad block table related constants</title>
<para>
These constants describe the options used for bad block
......
Markdown is supported
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment