Commit 70c3967d authored by Johannes Berg's avatar Johannes Berg Committed by Paul Mackerras

[POWERPC] Convert powermac ide blink to new led infrastructure

This patch removes the old pmac ide led blink code and
adds generic LED subsystem support for the LED.

It maintains backward compatibility with the old
BLK_DEV_IDE_PMAC_BLINK Kconfig option which now
simply selects the new code and influences the
default trigger.
Signed-off-by: default avatarJohannes Berg <johannes@sipsolutions.net>
Acked-by: default avatarBenjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: default avatarPaul Mackerras <paulus@samba.org>
parent 266bee88
......@@ -774,11 +774,18 @@ config BLK_DEV_IDEDMA_PMAC
performance.
config BLK_DEV_IDE_PMAC_BLINK
bool "Blink laptop LED on drive activity"
bool "Blink laptop LED on drive activity (DEPRECATED)"
depends on BLK_DEV_IDE_PMAC && ADB_PMU
select ADB_PMU_LED
select LEDS_TRIGGERS
select LEDS_TRIGGER_IDE_DISK
help
This option enables the use of the sleep LED as a hard drive
activity LED.
This option is deprecated, it only selects ADB_PMU_LED and
LEDS_TRIGGER_IDE_DISK and changes the code in the new led class
device to default to the ide-disk trigger (which should be set
from userspace via sysfs).
config BLK_DEV_IDE_SWARM
tristate "IDE for Sibyte evaluation boards"
......
......@@ -420,107 +420,6 @@ static void pmac_ide_kauai_selectproc(ide_drive_t *drive);
#endif /* CONFIG_BLK_DEV_IDEDMA_PMAC */
/*
* Below is the code for blinking the laptop LED along with hard
* disk activity.
*/
#ifdef CONFIG_BLK_DEV_IDE_PMAC_BLINK
/* Set to 50ms minimum led-on time (also used to limit frequency
* of requests sent to the PMU
*/
#define PMU_HD_BLINK_TIME (HZ/50)
static struct adb_request pmu_blink_on, pmu_blink_off;
static spinlock_t pmu_blink_lock;
static unsigned long pmu_blink_stoptime;
static int pmu_blink_ledstate;
static struct timer_list pmu_blink_timer;
static int pmu_ide_blink_enabled;
static void
pmu_hd_blink_timeout(unsigned long data)
{
unsigned long flags;
spin_lock_irqsave(&pmu_blink_lock, flags);
/* We may have been triggered again in a racy way, check
* that we really want to switch it off
*/
if (time_after(pmu_blink_stoptime, jiffies))
goto done;
/* Previous req. not complete, try 100ms more */
if (pmu_blink_off.complete == 0)
mod_timer(&pmu_blink_timer, jiffies + PMU_HD_BLINK_TIME);
else if (pmu_blink_ledstate) {
pmu_request(&pmu_blink_off, NULL, 4, 0xee, 4, 0, 0);
pmu_blink_ledstate = 0;
}
done:
spin_unlock_irqrestore(&pmu_blink_lock, flags);
}
static void
pmu_hd_kick_blink(void *data, int rw)
{
unsigned long flags;
pmu_blink_stoptime = jiffies + PMU_HD_BLINK_TIME;
wmb();
mod_timer(&pmu_blink_timer, pmu_blink_stoptime);
/* Fast path when LED is already ON */
if (pmu_blink_ledstate == 1)
return;
spin_lock_irqsave(&pmu_blink_lock, flags);
if (pmu_blink_on.complete && !pmu_blink_ledstate) {
pmu_request(&pmu_blink_on, NULL, 4, 0xee, 4, 0, 1);
pmu_blink_ledstate = 1;
}
spin_unlock_irqrestore(&pmu_blink_lock, flags);
}
static int
pmu_hd_blink_init(void)
{
struct device_node *dt;
const char *model;
/* Currently, I only enable this feature on KeyLargo based laptops,
* older laptops may support it (at least heathrow/paddington) but
* I don't feel like loading those venerable old machines with so
* much additional interrupt & PMU activity...
*/
if (pmu_get_model() != PMU_KEYLARGO_BASED)
return 0;
dt = of_find_node_by_path("/");
if (dt == NULL)
return 0;
model = (const char *)get_property(dt, "model", NULL);
if (model == NULL)
return 0;
if (strncmp(model, "PowerBook", strlen("PowerBook")) != 0 &&
strncmp(model, "iBook", strlen("iBook")) != 0) {
of_node_put(dt);
return 0;
}
of_node_put(dt);
pmu_blink_on.complete = 1;
pmu_blink_off.complete = 1;
spin_lock_init(&pmu_blink_lock);
init_timer(&pmu_blink_timer);
pmu_blink_timer.function = pmu_hd_blink_timeout;
return 1;
}
#endif /* CONFIG_BLK_DEV_IDE_PMAC_BLINK */
/*
* N.B. this can't be an initfunc, because the media-bay task can
* call ide_[un]register at any time.
......@@ -1192,23 +1091,6 @@ pmac_ide_do_suspend(ide_hwif_t *hwif)
pmif->timings[0] = 0;
pmif->timings[1] = 0;
#ifdef CONFIG_BLK_DEV_IDE_PMAC_BLINK
/* Note: This code will be called for every hwif, thus we'll
* try several time to stop the LED blinker timer, but that
* should be harmless
*/
if (pmu_ide_blink_enabled) {
unsigned long flags;
/* Make sure we don't hit the PMU blink */
spin_lock_irqsave(&pmu_blink_lock, flags);
if (pmu_blink_ledstate)
del_timer(&pmu_blink_timer);
pmu_blink_ledstate = 0;
spin_unlock_irqrestore(&pmu_blink_lock, flags);
}
#endif /* CONFIG_BLK_DEV_IDE_PMAC_BLINK */
disable_irq(pmif->irq);
/* The media bay will handle itself just fine */
......@@ -1376,13 +1258,6 @@ pmac_ide_setup_device(pmac_ide_hwif_t *pmif, ide_hwif_t *hwif)
hwif->selectproc = pmac_ide_selectproc;
hwif->speedproc = pmac_ide_tune_chipset;
#ifdef CONFIG_BLK_DEV_IDE_PMAC_BLINK
pmu_ide_blink_enabled = pmu_hd_blink_init();
if (pmu_ide_blink_enabled)
hwif->led_act = pmu_hd_kick_blink;
#endif
printk(KERN_INFO "ide%d: Found Apple %s controller, bus ID %d%s, irq %d\n",
hwif->index, model_name[pmif->kind], pmif->aapl_bus_id,
pmif->mediabay ? " (mediabay)" : "", hwif->irq);
......
......@@ -78,6 +78,17 @@ config ADB_PMU
this device; you should do so if your machine is one of those
mentioned above.
config ADB_PMU_LED
bool "Support for the Power/iBook front LED"
depends on ADB_PMU
select LEDS_CLASS
help
Support the front LED on Power/iBooks as a generic LED that can
be triggered by any of the supported triggers. To get the
behaviour of the old CONFIG_BLK_DEV_IDE_PMAC_BLINK, select this
and the ide-disk LED trigger and configure appropriately through
sysfs.
config PMAC_SMU
bool "Support for SMU based PowerMacs"
depends on PPC_PMAC64
......
......@@ -12,6 +12,7 @@ obj-$(CONFIG_INPUT_ADBHID) += adbhid.o
obj-$(CONFIG_ANSLCD) += ans-lcd.o
obj-$(CONFIG_ADB_PMU) += via-pmu.o via-pmu-event.o
obj-$(CONFIG_ADB_PMU_LED) += via-pmu-led.o
obj-$(CONFIG_PMAC_BACKLIGHT) += via-pmu-backlight.o
obj-$(CONFIG_ADB_CUDA) += via-cuda.o
obj-$(CONFIG_PMAC_APM_EMU) += apm_emu.o
......
/*
* via-pmu LED class device
*
* Copyright 2006 Johannes Berg <johannes@sipsolutions.net>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful, but
* WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
* NON INFRINGEMENT. See the GNU General Public License for more
* details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*
*/
#include <linux/types.h>
#include <linux/kernel.h>
#include <linux/device.h>
#include <linux/leds.h>
#include <linux/adb.h>
#include <linux/pmu.h>
#include <asm/prom.h>
static spinlock_t pmu_blink_lock;
static struct adb_request pmu_blink_req;
/* -1: no change, 0: request off, 1: request on */
static int requested_change;
static int sleeping;
static void pmu_req_done(struct adb_request * req)
{
unsigned long flags;
spin_lock_irqsave(&pmu_blink_lock, flags);
/* if someone requested a change in the meantime
* (we only see the last one which is fine)
* then apply it now */
if (requested_change != -1 && !sleeping)
pmu_request(&pmu_blink_req, NULL, 4, 0xee, 4, 0, requested_change);
/* reset requested change */
requested_change = -1;
spin_unlock_irqrestore(&pmu_blink_lock, flags);
}
static void pmu_led_set(struct led_classdev *led_cdev,
enum led_brightness brightness)
{
unsigned long flags;
spin_lock_irqsave(&pmu_blink_lock, flags);
switch (brightness) {
case LED_OFF:
requested_change = 0;
break;
case LED_FULL:
requested_change = 1;
break;
default:
goto out;
break;
}
/* if request isn't done, then don't do anything */
if (pmu_blink_req.complete && !sleeping)
pmu_request(&pmu_blink_req, NULL, 4, 0xee, 4, 0, requested_change);
out:
spin_unlock_irqrestore(&pmu_blink_lock, flags);
}
static struct led_classdev pmu_led = {
.name = "pmu-front-led",
#ifdef CONFIG_BLK_DEV_IDE_PMAC_BLINK
.default_trigger = "ide-disk",
#endif
.brightness_set = pmu_led_set,
};
#ifdef CONFIG_PM
static int pmu_led_sleep_call(struct pmu_sleep_notifier *self, int when)
{
unsigned long flags;
spin_lock_irqsave(&pmu_blink_lock, flags);
switch (when) {
case PBOOK_SLEEP_REQUEST:
sleeping = 1;
break;
case PBOOK_WAKE:
sleeping = 0;
break;
default:
/* do nothing */
break;
}
spin_unlock_irqrestore(&pmu_blink_lock, flags);
return PBOOK_SLEEP_OK;
}
static struct pmu_sleep_notifier via_pmu_led_sleep_notif = {
.notifier_call = pmu_led_sleep_call,
};
#endif
static int __init via_pmu_led_init(void)
{
struct device_node *dt;
const char *model;
/* only do this on keylargo based models */
if (pmu_get_model() != PMU_KEYLARGO_BASED)
return -ENODEV;
dt = of_find_node_by_path("/");
if (dt == NULL)
return -ENODEV;
model = (const char *)get_property(dt, "model", NULL);
if (model == NULL)
return -ENODEV;
if (strncmp(model, "PowerBook", strlen("PowerBook")) != 0 &&
strncmp(model, "iBook", strlen("iBook")) != 0) {
of_node_put(dt);
/* ignore */
return -ENODEV;
}
of_node_put(dt);
spin_lock_init(&pmu_blink_lock);
/* no outstanding req */
pmu_blink_req.complete = 1;
pmu_blink_req.done = pmu_req_done;
#ifdef CONFIG_PM
pmu_register_sleep_notifier(&via_pmu_led_sleep_notif);
#endif
return led_classdev_register(NULL, &pmu_led);
}
late_initcall(via_pmu_led_init);
Markdown is supported
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment