Commit 70b5d737 authored by Mathias Nyman's avatar Mathias Nyman Committed by Tony Lindgren
Browse files

omap: tsl2563 ALS support for Nokia N900



This commit will enable usage of tsl2563 ambient light sensor on Nokia N900.
Signed-off-by: default avatarAmeya Palande <ameya.palande@nokia.com>
Signed-off-by: default avatarMathias Nyman <mathias.nyman@nokia.com>
Signed-off-by: default avatarTony Lindgren <tony@atomide.com>
parent 64d06691
...@@ -35,6 +35,8 @@ ...@@ -35,6 +35,8 @@
#include <sound/tlv320aic3x.h> #include <sound/tlv320aic3x.h>
#include <sound/tpa6130a2-plat.h> #include <sound/tpa6130a2-plat.h>
#include <../drivers/staging/iio/light/tsl2563.h>
#include "mux.h" #include "mux.h"
#include "hsmmc.h" #include "hsmmc.h"
...@@ -53,6 +55,12 @@ enum { ...@@ -53,6 +55,12 @@ enum {
static struct wl12xx_platform_data wl1251_pdata; static struct wl12xx_platform_data wl1251_pdata;
#if defined(CONFIG_SENSORS_TSL2563) || defined(CONFIG_SENSORS_TSL2563_MODULE)
static struct tsl2563_platform_data rx51_tsl2563_platform_data = {
.cover_comp_gain = 16,
};
#endif
static struct omap2_mcspi_device_config wl1251_mcspi_config = { static struct omap2_mcspi_device_config wl1251_mcspi_config = {
.turbo_mode = 0, .turbo_mode = 0,
.single_channel = 1, .single_channel = 1,
...@@ -714,6 +722,12 @@ static struct i2c_board_info __initdata rx51_peripherals_i2c_board_info_2[] = { ...@@ -714,6 +722,12 @@ static struct i2c_board_info __initdata rx51_peripherals_i2c_board_info_2[] = {
I2C_BOARD_INFO("tlv320aic3x", 0x18), I2C_BOARD_INFO("tlv320aic3x", 0x18),
.platform_data = &rx51_aic3x_data, .platform_data = &rx51_aic3x_data,
}, },
#if defined(CONFIG_SENSORS_TSL2563) || defined(CONFIG_SENSORS_TSL2563_MODULE)
{
I2C_BOARD_INFO("tsl2563", 0x29),
.platform_data = &rx51_tsl2563_platform_data,
},
#endif
{ {
I2C_BOARD_INFO("tpa6130a2", 0x60), I2C_BOARD_INFO("tpa6130a2", 0x60),
.platform_data = &rx51_tpa6130a2_data, .platform_data = &rx51_tpa6130a2_data,
......
Markdown is supported
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment