Commit 6f584cfa authored by Eric Miao's avatar Eric Miao
Browse files

[ARM] pxa: move I2C pin configurations out into board specific files


Signed-off-by: default avatarEric Miao <eric.miao@marvell.com>
parent 14758220
......@@ -136,6 +136,10 @@ static mfp_cfg_t cm_x300_mfp_cfg[] __initdata = {
GPIO82_GPIO | MFP_PULL_HIGH, /* MMC CD */
GPIO85_GPIO, /* MMC WP */
GPIO99_GPIO, /* Ethernet IRQ */
/* Standard I2C */
GPIO21_I2C_SCL,
GPIO22_I2C_SDA,
};
#if defined(CONFIG_DM9000) || defined(CONFIG_DM9000_MODULE)
......
......@@ -10,7 +10,6 @@
#include <mach/mmc.h>
#include <mach/irda.h>
#include <mach/i2c.h>
#include <mach/mfp-pxa27x.h>
#include <mach/ohci.h>
#include <mach/pxa27x_keypad.h>
#include <mach/pxa2xx_spi.h>
......@@ -249,15 +248,8 @@ struct platform_device pxa_device_i2c = {
.num_resources = ARRAY_SIZE(pxai2c_resources),
};
static unsigned long pxa27x_i2c_mfp_cfg[] = {
GPIO117_I2C_SCL,
GPIO118_I2C_SDA,
};
void __init pxa_set_i2c_info(struct i2c_pxa_platform_data *info)
{
if (cpu_is_pxa27x())
pxa2xx_mfp_config(ARRAY_AND_SIZE(pxa27x_i2c_mfp_cfg));
pxa_register_device(&pxa_device_i2c, info);
}
......
......@@ -112,6 +112,10 @@ static unsigned long ezx_pin_config[] __initdata = {
GPIO91_USB_P3_1, /* ICL_XRXD */
GPIO56_USB_P3_4, /* ICL_VMOUT */
GPIO113_USB_P3_3, /* /ICL_VMIN */
/* I2C */
GPIO117_I2C_SCL,
GPIO118_I2C_SDA,
};
static void __init ezx_init(void)
......
......@@ -123,6 +123,10 @@ static unsigned long magician_pin_config[] __initdata = {
GPIO107_GPIO, /* DS1WM_IRQ */
GPIO108_GPIO, /* GSM_READY */
GPIO115_GPIO, /* nPEN_IRQ */
/* I2C */
GPIO117_I2C_SCL,
GPIO118_I2C_SDA,
};
/*
......
......@@ -128,6 +128,10 @@ static unsigned long mainstone_pin_config[] = {
GPIO108_KP_MKOUT_5,
GPIO96_KP_MKOUT_6,
/* I2C */
GPIO117_I2C_SCL,
GPIO118_I2C_SDA,
/* GPIO */
GPIO1_GPIO | WAKEUP_ON_EDGE_BOTH,
};
......
......@@ -55,6 +55,10 @@ static unsigned long pcm990_pin_config[] __initdata = {
GPIO89_USBH1_PEN,
/* PWM0 */
GPIO16_PWM0_OUT,
/* I2C */
GPIO117_I2C_SCL,
GPIO118_I2C_SDA,
};
/*
......
......@@ -122,6 +122,10 @@ static unsigned long spitz_pin_config[] __initdata = {
GPIO105_GPIO, /* SPITZ_GPIO_CF_IRQ */
GPIO106_GPIO, /* SPITZ_GPIO_CF2_IRQ */
/* I2C */
GPIO117_I2C_SCL,
GPIO118_I2C_SDA,
GPIO1_GPIO | WAKEUP_ON_EDGE_RISE,
};
......
Markdown is supported
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment