Commit 686314cf authored by Alan Stern's avatar Alan Stern Committed by Greg Kroah-Hartman
Browse files

USB: separate root and non-root suspend/resume



This patch (as916) completes the separation of code paths for suspend
and resume of root hubs as opposed to non-root devices.  Root hubs
will be power-managed through their bus_suspend and bus_resume
methods, whereas normal devices will use usb_port_suspend() and
usb_port_resume().

Changes to the hcd_bus_{suspend,resume} routines mostly represent
motion of code that was already present elsewhere.  They include:

	Adding debugging log messages,

	Setting the device state appropriately, and

	Adding a resume recovery time delay.

Changes to the port-suspend and port-resume routines in hub.c include:

	Removal of checks for root devices (since they will never
	be triggered), and

	Removal of checks for NULL or invalid device pointers (these
	were left over from earlier kernel versions and aren't needed
	at all).
Signed-off-by: default avatarAlan Stern <stern@rowland.harvard.edu>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@suse.de>
parent 4956eccd
......@@ -196,20 +196,15 @@ static int generic_suspend(struct usb_device *udev, pm_message_t msg)
{
int rc;
rc = usb_port_suspend(udev);
/* Root hubs don't have upstream ports to suspend,
* so the line above won't do much for them. We have to
* shut down their downstream HC-to-USB interfaces manually,
* by doing a bus (or "global") suspend.
/* Normal USB devices suspend through their upstream port.
* Root hubs don't have upstream ports to suspend,
* so we have to shut down their downstream HC-to-USB
* interfaces manually by doing a bus (or "global") suspend.
*/
if (rc == 0 && !udev->parent) {
rc = hcd_bus_suspend(udev->bus);
if (rc) {
dev_dbg(&udev->dev, "'global' suspend %d\n", rc);
usb_port_resume(udev);
}
}
if (!udev->parent)
rc = hcd_bus_suspend(udev);
else
rc = usb_port_suspend(udev);
return rc;
}
......@@ -217,25 +212,17 @@ static int generic_resume(struct usb_device *udev)
{
int rc;
if (udev->reset_resume)
/* Normal USB devices resume/reset through their upstream port.
* Root hubs don't have upstream ports to resume or reset,
* so we have to start up their downstream HC-to-USB
* interfaces manually by doing a bus (or "global") resume.
*/
if (!udev->parent)
rc = hcd_bus_resume(udev);
else if (udev->reset_resume)
rc = usb_reset_suspended_device(udev);
else
rc = usb_port_resume(udev);
/* Root hubs don't have upstream ports to resume or reset,
* so the line above won't do much for them. We have to
* start up their downstream HC-to-USB interfaces manually,
* by doing a bus (or "global") resume.
*/
if (rc == 0 && !udev->parent) {
rc = hcd_bus_resume(udev->bus);
if (rc)
dev_dbg(&udev->dev, "'global' resume %d\n", rc);
else {
/* TRSMRCY = 10 msec */
msleep(10);
}
}
return rc;
}
......
......@@ -1257,40 +1257,54 @@ rescan:
#ifdef CONFIG_PM
int hcd_bus_suspend (struct usb_bus *bus)
int hcd_bus_suspend(struct usb_device *rhdev)
{
struct usb_hcd *hcd;
int status;
struct usb_hcd *hcd = container_of(rhdev->bus, struct usb_hcd, self);
int status;
int old_state = hcd->state;
hcd = container_of (bus, struct usb_hcd, self);
if (!hcd->driver->bus_suspend)
return -ENOENT;
hcd->state = HC_STATE_QUIESCING;
status = hcd->driver->bus_suspend (hcd);
if (status == 0)
dev_dbg(&rhdev->dev, "bus %s%s\n",
rhdev->auto_pm ? "auto-" : "", "suspend");
if (!hcd->driver->bus_suspend) {
status = -ENOENT;
} else {
hcd->state = HC_STATE_QUIESCING;
status = hcd->driver->bus_suspend(hcd);
}
if (status == 0) {
usb_set_device_state(rhdev, USB_STATE_SUSPENDED);
hcd->state = HC_STATE_SUSPENDED;
else
dev_dbg(&bus->root_hub->dev, "%s fail, err %d\n",
} else {
hcd->state = old_state;
dev_dbg(&rhdev->dev, "bus %s fail, err %d\n",
"suspend", status);
}
return status;
}
int hcd_bus_resume (struct usb_bus *bus)
int hcd_bus_resume(struct usb_device *rhdev)
{
struct usb_hcd *hcd;
int status;
struct usb_hcd *hcd = container_of(rhdev->bus, struct usb_hcd, self);
int status;
hcd = container_of (bus, struct usb_hcd, self);
dev_dbg(&rhdev->dev, "usb %s%s\n",
rhdev->auto_pm ? "auto-" : "", "resume");
if (!hcd->driver->bus_resume)
return -ENOENT;
if (hcd->state == HC_STATE_RUNNING)
return 0;
hcd->state = HC_STATE_RESUMING;
status = hcd->driver->bus_resume (hcd);
if (status == 0)
status = hcd->driver->bus_resume(hcd);
if (status == 0) {
/* TRSMRCY = 10 msec */
msleep(10);
usb_set_device_state(rhdev, rhdev->actconfig
? USB_STATE_CONFIGURED
: USB_STATE_ADDRESS);
hcd->state = HC_STATE_RUNNING;
else {
dev_dbg(&bus->root_hub->dev, "%s fail, err %d\n",
} else {
dev_dbg(&rhdev->dev, "bus %s fail, err %d\n",
"resume", status);
usb_hc_died(hcd);
}
......
......@@ -364,23 +364,13 @@ extern int usb_find_interface_driver (struct usb_device *dev,
#ifdef CONFIG_PM
extern void usb_hcd_resume_root_hub (struct usb_hcd *hcd);
extern void usb_root_hub_lost_power (struct usb_device *rhdev);
extern int hcd_bus_suspend (struct usb_bus *bus);
extern int hcd_bus_resume (struct usb_bus *bus);
extern int hcd_bus_suspend(struct usb_device *rhdev);
extern int hcd_bus_resume(struct usb_device *rhdev);
#else
static inline void usb_hcd_resume_root_hub(struct usb_hcd *hcd)
{
return;
}
static inline int hcd_bus_suspend(struct usb_bus *bus)
{
return 0;
}
static inline int hcd_bus_resume (struct usb_bus *bus)
{
return 0;
}
#endif /* CONFIG_PM */
/*
......
......@@ -1722,17 +1722,8 @@ int usb_port_suspend(struct usb_device *udev)
{
int status = 0;
/* we change the device's upstream USB link,
* but root hubs have no upstream USB link.
*/
if (udev->parent)
status = hub_port_suspend(hdev_to_hub(udev->parent),
udev->portnum, udev);
else {
dev_dbg(&udev->dev, "usb %ssuspend\n",
udev->auto_pm ? "auto-" : "");
usb_set_device_state(udev, USB_STATE_SUSPENDED);
}
status = hub_port_suspend(hdev_to_hub(udev->parent),
udev->portnum, udev);
return status;
}
......@@ -1775,8 +1766,7 @@ static int finish_port_resume(struct usb_device *udev)
status);
else if (udev->actconfig) {
le16_to_cpus(&devstatus);
if ((devstatus & (1 << USB_DEVICE_REMOTE_WAKEUP))
&& udev->parent) {
if (devstatus & (1 << USB_DEVICE_REMOTE_WAKEUP)) {
status = usb_control_msg(udev,
usb_sndctrlpipe(udev, 0),
USB_REQ_CLEAR_FEATURE,
......@@ -1789,10 +1779,6 @@ static int finish_port_resume(struct usb_device *udev)
"wakeup, status %d\n", status);
}
status = 0;
} else if (udev->devnum <= 0) {
dev_dbg(&udev->dev, "bogus resume!\n");
status = -EINVAL;
}
return status;
}
......@@ -1821,9 +1807,8 @@ hub_port_resume(struct usb_hub *hub, int port1, struct usb_device *udev)
port1, status);
} else {
/* drive resume for at least 20 msec */
if (udev)
dev_dbg(&udev->dev, "usb %sresume\n",
udev->auto_pm ? "auto-" : "");
dev_dbg(&udev->dev, "usb %sresume\n",
udev->auto_pm ? "auto-" : "");
msleep(25);
#define LIVE_FLAGS ( USB_PORT_STAT_POWER \
......@@ -1851,8 +1836,7 @@ SuspendCleared:
USB_PORT_FEAT_C_SUSPEND);
/* TRSMRCY = 10 msec */
msleep(10);
if (udev)
status = finish_port_resume(udev);
status = finish_port_resume(udev);
}
}
if (status < 0)
......@@ -1882,18 +1866,8 @@ int usb_port_resume(struct usb_device *udev)
{
int status;
/* we change the device's upstream USB link,
* but root hubs have no upstream USB link.
*/
if (udev->parent) {
// NOTE this fails if parent is also suspended...
status = hub_port_resume(hdev_to_hub(udev->parent),
udev->portnum, udev);
} else {
dev_dbg(&udev->dev, "usb %sresume\n",
udev->auto_pm ? "auto-" : "");
status = finish_port_resume(udev);
}
status = hub_port_resume(hdev_to_hub(udev->parent),
udev->portnum, udev);
if (status < 0)
dev_dbg(&udev->dev, "can't resume, status %d\n", status);
return status;
......
Markdown is supported
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment