Commit 6752ee90 authored by Bob Copeland's avatar Bob Copeland Committed by John W. Linville
Browse files

ath5k: use ctl settings based on current regdomain



Update ath5k to use the ctl settings for tx power based on current
regulatory domain.
Signed-off-by: default avatarBob Copeland <me@bobcopeland.com>
Acked-by: default avatarNick Kossifidis <mickflemm@gmail.com>
Signed-off-by: default avatarJohn W. Linville <linville@tuxdriver.com>
parent 57e6c56d
......@@ -2158,8 +2158,6 @@ done:
* Get the max edge power for this channel if
* we have such data from EEPROM's Conformance Test
* Limits (CTL), and limit max power if needed.
*
* FIXME: Only works for world regulatory domains
*/
static void
ath5k_get_max_ctl_power(struct ath5k_hw *ah,
......@@ -2175,26 +2173,23 @@ ath5k_get_max_ctl_power(struct ath5k_hw *ah,
u8 ctl_idx = 0xFF;
u32 target = channel->center_freq;
/* Find out a CTL for our mode that's not mapped
* on a specific reg domain.
*
* TODO: Map our current reg domain to one of the 3 available
* reg domain ids so that we can support more CTLs. */
ctl_mode = ath_regd_get_band_ctl(&ah->ah_regulatory, channel->band);
switch (channel->hw_value & CHANNEL_MODES) {
case CHANNEL_A:
ctl_mode = AR5K_CTL_11A | AR5K_CTL_NO_REGDOMAIN;
ctl_mode |= AR5K_CTL_11A;
break;
case CHANNEL_G:
ctl_mode = AR5K_CTL_11G | AR5K_CTL_NO_REGDOMAIN;
ctl_mode |= AR5K_CTL_11G;
break;
case CHANNEL_B:
ctl_mode = AR5K_CTL_11B | AR5K_CTL_NO_REGDOMAIN;
ctl_mode |= AR5K_CTL_11B;
break;
case CHANNEL_T:
ctl_mode = AR5K_CTL_TURBO | AR5K_CTL_NO_REGDOMAIN;
ctl_mode |= AR5K_CTL_TURBO;
break;
case CHANNEL_TG:
ctl_mode = AR5K_CTL_TURBOG | AR5K_CTL_NO_REGDOMAIN;
ctl_mode |= AR5K_CTL_TURBOG;
break;
case CHANNEL_XR:
/* Fall through */
......
Markdown is supported
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment