Commit 674c6479 authored by Colin Ngam's avatar Colin Ngam Committed by Tony Luck
Browse files

[IA64-SGI] Altix only: Add PCI Domain number support.



This patch enables PCI Domain numbering on Altix.
Signed-off-by: default avatarColin Ngam <cngam@sgi.com>
Signed-off-by: default avatarTony Luck <tony.luck@intel.com>
parent b5da623a
......@@ -34,7 +34,8 @@ struct sn_flush_device_list {
unsigned long sfdl_force_int_addr;
unsigned long sfdl_flush_value;
volatile unsigned long *sfdl_flush_addr;
uint64_t sfdl_persistent_busnum;
uint32_t sfdl_persistent_busnum;
uint32_t sfdl_persistent_segment;
struct pcibus_info *sfdl_pcibus_info;
spinlock_t sfdl_flush_lock;
};
......@@ -58,7 +59,8 @@ struct hubdev_info {
void *hdi_nodepda;
void *hdi_node_vertex;
void *hdi_xtalk_vertex;
uint32_t max_segment_number;
uint32_t max_pcibus_number;
};
extern void hubdev_init_node(nodepda_t *, cnodeid_t);
......
......@@ -44,6 +44,9 @@ int sn_ioif_inited = 0; /* SN I/O infrastructure initialized? */
struct sn_pcibus_provider *sn_pci_provider[PCIIO_ASIC_MAX_TYPES]; /* indexed by asic type */
static int max_segment_number = 0; /* Default highest segment number */
static int max_pcibus_number = 255; /* Default highest pci bus number */
/*
* Hooks and struct for unsupported pci providers
*/
......@@ -157,13 +160,28 @@ static void sn_fixup_ionodes(void)
uint64_t nasid;
int i, widget;
/*
* Get SGI Specific HUB chipset information.
* Inform Prom that this kernel can support domain bus numbering.
*/
for (i = 0; i < numionodes; i++) {
hubdev = (struct hubdev_info *)(NODEPDA(i)->pdinfo);
nasid = cnodeid_to_nasid(i);
hubdev->max_segment_number = 0xffffffff;
hubdev->max_pcibus_number = 0xff;
status = sal_get_hubdev_info(nasid, (uint64_t) __pa(hubdev));
if (status)
continue;
/* Save the largest Domain and pcibus numbers found. */
if (hubdev->max_segment_number) {
/*
* Dealing with a Prom that supports segments.
*/
max_segment_number = hubdev->max_segment_number;
max_pcibus_number = hubdev->max_pcibus_number;
}
/* Attach the error interrupt handlers */
if (nasid & 1)
ice_error_init(hubdev);
......@@ -229,7 +247,7 @@ void sn_pci_unfixup_slot(struct pci_dev *dev)
void sn_pci_fixup_slot(struct pci_dev *dev)
{
int idx;
int segment = 0;
int segment = pci_domain_nr(dev->bus);
int status = 0;
struct pcibus_bussoft *bs;
struct pci_bus *host_pci_bus;
......@@ -282,9 +300,9 @@ void sn_pci_fixup_slot(struct pci_dev *dev)
* PCI host_pci_dev struct and set up host bus linkages
*/
bus_no = SN_PCIDEV_INFO(dev)->pdi_slot_host_handle >> 32;
bus_no = (SN_PCIDEV_INFO(dev)->pdi_slot_host_handle >> 32) & 0xff;
devfn = SN_PCIDEV_INFO(dev)->pdi_slot_host_handle & 0xffffffff;
host_pci_bus = pci_find_bus(pci_domain_nr(dev->bus), bus_no);
host_pci_bus = pci_find_bus(segment, bus_no);
host_pci_dev = pci_get_slot(host_pci_bus, devfn);
SN_PCIDEV_INFO(dev)->host_pci_dev = host_pci_dev;
......@@ -332,6 +350,7 @@ void sn_pci_controller_fixup(int segment, int busnum, struct pci_bus *bus)
prom_bussoft_ptr = __va(prom_bussoft_ptr);
controller = kcalloc(1,sizeof(struct pci_controller), GFP_KERNEL);
controller->segment = segment;
if (!controller)
BUG();
......@@ -387,7 +406,7 @@ void sn_pci_controller_fixup(int segment, int busnum, struct pci_bus *bus)
if (controller->node >= num_online_nodes()) {
struct pcibus_bussoft *b = SN_PCIBUS_BUSSOFT(bus);
printk(KERN_WARNING "Device ASIC=%u XID=%u PBUSNUM=%lu"
printk(KERN_WARNING "Device ASIC=%u XID=%u PBUSNUM=%u"
"L_IO=%lx L_MEM=%lx BASE=%lx\n",
b->bs_asic_type, b->bs_xid, b->bs_persist_busnum,
b->bs_legacy_io, b->bs_legacy_mem, b->bs_base);
......@@ -442,6 +461,7 @@ sn_sysdata_free_start:
static int __init sn_pci_init(void)
{
int i = 0;
int j = 0;
struct pci_dev *pci_dev = NULL;
extern void sn_init_cpei_timer(void);
#ifdef CONFIG_PROC_FS
......@@ -476,8 +496,9 @@ static int __init sn_pci_init(void)
#endif
/* busses are not known yet ... */
for (i = 0; i < PCI_BUSES_TO_SCAN; i++)
sn_pci_controller_fixup(0, i, NULL);
for (i = 0; i <= max_segment_number; i++)
for (j = 0; j <= max_pcibus_number; j++)
sn_pci_controller_fixup(i, j, NULL);
/*
* Generic Linux PCI Layer has created the pci_bus and pci_dev
......
......@@ -60,7 +60,7 @@ static int sal_pcibr_error_interrupt(struct pcibus_info *soft)
ret_stuff.status = 0;
ret_stuff.v0 = 0;
segment = 0;
segment = soft->pbi_buscommon.bs_persist_segment;
busnum = soft->pbi_buscommon.bs_persist_busnum;
SAL_CALL_NOLOCK(ret_stuff,
(u64) SN_SAL_IOIF_ERROR_INTERRUPT,
......@@ -142,9 +142,12 @@ pcibr_bus_fixup(struct pcibus_bussoft *prom_bussoft, struct pci_controller *cont
j++, sn_flush_device_list++) {
if (sn_flush_device_list->sfdl_slot == -1)
continue;
if (sn_flush_device_list->
sfdl_persistent_busnum ==
soft->pbi_buscommon.bs_persist_busnum)
if ((sn_flush_device_list->
sfdl_persistent_segment ==
soft->pbi_buscommon.bs_persist_segment) &&
(sn_flush_device_list->
sfdl_persistent_busnum ==
soft->pbi_buscommon.bs_persist_busnum))
sn_flush_device_list->sfdl_pcibus_info =
soft;
}
......
......@@ -559,7 +559,7 @@ tioca_error_intr_handler(int irq, void *arg, struct pt_regs *pt)
ret_stuff.status = 0;
ret_stuff.v0 = 0;
segment = 0;
segment = soft->ca_common.bs_persist_segment;
busnum = soft->ca_common.bs_persist_busnum;
SAL_CALL_NOLOCK(ret_stuff,
......@@ -622,7 +622,8 @@ tioca_bus_fixup(struct pcibus_bussoft *prom_bussoft, struct pci_controller *cont
nasid_to_cnodeid(tioca_common->ca_closest_nasid);
tioca_common->ca_kernel_private = (uint64_t) tioca_kern;
bus = pci_find_bus(0, tioca_common->ca_common.bs_persist_busnum);
bus = pci_find_bus(tioca_common->ca_common.bs_persist_segment,
tioca_common->ca_common.bs_persist_busnum);
BUG_ON(!bus);
tioca_kern->ca_devices = &bus->devices;
......
......@@ -30,7 +30,8 @@
struct pcibus_bussoft {
uint32_t bs_asic_type; /* chipset type */
uint32_t bs_xid; /* xwidget id */
uint64_t bs_persist_busnum; /* Persistent Bus Number */
uint32_t bs_persist_busnum; /* Persistent Bus Number */
uint32_t bs_persist_segment; /* Segment Number */
uint64_t bs_legacy_io; /* legacy io pio addr */
uint64_t bs_legacy_mem; /* legacy mem pio addr */
uint64_t bs_base; /* widget base */
......
Supports Markdown
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment