Commit 63e30271 authored by Linus Torvalds's avatar Linus Torvalds
Browse files

Merge tag 'pci-v4.6-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci

Pull PCI updates from Bjorn Helgaas:
 "PCI changes for v4.6:

  Enumeration:
   - Disable IO/MEM decoding for devices with non-compliant BARs (Bjorn Helgaas)
   - Mark Broadwell-EP Home Agent & PCU as having non-compliant BARs (Bjorn Helgaas

  Resource management:
   - Mark shadow copy of VGA ROM as IORESOURCE_PCI_FIXED (Bjorn Helgaas)
   - Don't assign or reassign immutable resources (Bjorn Helgaas)
   - Don't enable/disable ROM BAR if we're using a RAM shadow copy (Bjorn Helgaas)
   - Set ROM shadow location in arch code, not in PCI core (Bjorn Helgaas)
   - Remove arch-specific IORESOURCE_ROM_SHADOW size from sysfs (Bjorn Helgaas)
   - ia64: Use ioremap() instead of open-coded equivalent (Bjorn Helgaas)
   - ia64: Keep CPU physical (not virtual) addresses in shadow ROM resource (Bjorn Helgaas)
   - MIPS: Keep CPU physical (not virtual) addresses in shadow ROM resource (Bjorn Helgaas)
   - Remove unused IORESOURCE_ROM_COPY and IORESOURCE_ROM_BIOS_COPY (Bjorn Helgaas)
   - Don't leak memory if sysfs_create_bin_file() fails (Bjorn Helgaas)
   - rcar: Remove PCI_PROBE_ONLY handling (Lorenzo Pieralisi)
   - designware: Remove PCI_PROBE_ONLY handling (Lorenzo Pieralisi)

  Virtualization:
   - Wait for up to 1000ms after FLR reset (Alex Williamson)
   - Support SR-IOV on any function type (Kelly Zytaruk)
   - Add ACS quirk for all Cavium devices (Manish Jaggi)

  AER:
   - Rename pci_ops_aer to aer_inj_pci_ops (Bjorn Helgaas)
   - Restore pci_ops pointer while calling original pci_ops (David Daney)
   - Fix aer_inject error codes (Jean Delvare)
   - Use dev_warn() in aer_inject (Jean Delvare)
   - Log actual error causes in aer_inject (Jean Delvare)
   - Log aer_inject error injections (Jean Delvare)

  VPD:
   - Prevent VPD access for buggy devices (Babu Moger)
   - Move pci_read_vpd() and pci_write_vpd() close to other VPD code (Bjorn Helgaas)
   - Move pci_vpd_release() from header file to pci/access.c (Bjorn Helgaas)
   - Remove struct pci_vpd_ops.release function pointer (Bjorn Helgaas)
   - Rename VPD symbols to remove unnecessary "pci22" (Bjorn Helgaas)
   - Fold struct pci_vpd_pci22 into struct pci_vpd (Bjorn Helgaas)
   - Sleep rather than busy-wait for VPD access completion (Bjorn Helgaas)
   - Update VPD definitions (Hannes Reinecke)
   - Allow access to VPD attributes with size 0 (Hannes Reinecke)
   - Determine actual VPD size on first access (Hannes Reinecke)

  Generic host bridge driver:
   - Move structure definitions to separate header file (David Daney)
   - Add pci_host_common_probe(), based on gen_pci_probe() (David Daney)
   - Expose pci_host_common_probe() for use by other drivers (David Daney)

  Altera host bridge driver:
   - Fix altera_pcie_link_is_up() (Ley Foon Tan)

  Cavium ThunderX host bridge driver:
   - Add PCIe host driver for ThunderX processors (David Daney)
   - Add driver for ThunderX-pass{1,2} on-chip devices (David Daney)

  Freescale i.MX6 host bridge driver:
   - Add DT bindings to configure PHY Tx driver settings (Justin Waters)
   - Move imx6_pcie_reset_phy() near other PHY handling functions (Lucas Stach)
   - Move PHY reset into imx6_pcie_establish_link() (Lucas Stach)
   - Remove broken Gen2 workaround (Lucas Stach)
   - Move link up check into imx6_pcie_wait_for_link() (Lucas Stach)

  Freescale Layerscape host bridge driver:
   - Add "fsl,ls2085a-pcie" compatible ID (Yang Shi)

  Intel VMD host bridge driver:
   - Attach VMD resources to parent domain's resource tree (Jon Derrick)
   - Set bus resource start to 0 (Keith Busch)

  Microsoft Hyper-V host bridge driver:
   - Add fwnode_handle to x86 pci_sysdata (Jake Oshins)
   - Look up IRQ domain by fwnode_handle (Jake Oshins)
   - Add paravirtual PCI front-end for Microsoft Hyper-V VMs (Jake Oshins)

  NVIDIA Tegra host bridge driver:
   - Add pci_ops.{add,remove}_bus() callbacks (Thierry Reding)
   - Implement ->{add,remove}_bus() callbacks (Thierry Reding)
   - Remove unused struct tegra_pcie.num_ports field (Thierry Reding)
   - Track bus -> CPU mapping (Thierry Reding)
   - Remove misleading PHYS_OFFSET (Thierry Reding)

  Renesas R-Car host bridge driver:
   - Depend on ARCH_RENESAS, not ARCH_SHMOBILE (Simon Horman)

  Synopsys DesignWare host bridge driver:
   - ARC: Add PCI support (Joao Pinto)
   - Add generic dw_pcie_wait_for_link() (Joao Pinto)
   - Add default link up check if sub-driver doesn't override (Joao Pinto)
   - Add driver for prototyping kits based on ARC SDP (Joao Pinto)

  TI Keystone host bridge driver:
   - Defer probing if devm_phy_get() returns -EPROBE_DEFER (Shawn Lin)

  Xilinx AXI host bridge driver:
   - Use of_pci_get_host_bridge_resources() to parse DT (Bharat Kumar Gogada)
   - Remove dependency on ARM-specific struct hw_pci (Bharat Kumar Gogada)
   - Don't call pci_fixup_irqs() on Microblaze (Bharat Kumar Gogada)
   - Update Zynq binding with Microblaze node (Bharat Kumar Gogada)
   - microblaze: Support generic Xilinx AXI PCIe Host Bridge IP driver (Bharat Kumar Gogada)

  Xilinx NWL host bridge driver:
   - Add support for Xilinx NWL PCIe Host Controller (Bharat Kumar Gogada)

  Miscellaneous:
   - Check device_attach() return value always (Bjorn Helgaas)
   - Move pci_set_flags() from asm-generic/pci-bridge.h to linux/pci.h (Bjorn Helgaas)
   - Remove includes of empty asm-generic/pci-bridge.h (Bjorn Helgaas)
   - ARM64: Remove generated include of asm-generic/pci-bridge.h (Bjorn Helgaas)
   - Remove empty asm-generic/pci-bridge.h (Bjorn Helgaas)
   - Remove includes of asm/pci-bridge.h (Bjorn Helgaas)
   - Consolidate PCI DMA constants and interfaces in linux/pci-dma-compat.h (Bjorn Helgaas)
   - unicore32: Remove unused HAVE_ARCH_PCI_SET_DMA_MASK definition (Bjorn Helgaas)
   - Cleanup pci/pcie/Kconfig whitespace (Andreas Ziegler)
   - Include pci/hotplug Kconfig directly from pci/Kconfig (Bjorn Helgaas)
   - Include pci/pcie/Kconfig directly from pci/Kconfig (Bogicevic Sasa)
   - frv: Remove stray pci_{alloc,free}_consistent() declaration (Christoph Hellwig)
   - Move pci_dma_* helpers to common code (Christoph Hellwig)
   - Add PCI_CLASS_SERIAL_USB_DEVICE definition (Heikki Krogerus)
   - Add QEMU top-level IDs for (sub)vendor & device (Robin H. Johnson)
   - Fix broken URL for Dell biosdevname (Naga Venkata Sai Indubhaskar Jupudi)"

* tag 'pci-v4.6-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (94 commits)
  PCI: Add PCI_CLASS_SERIAL_USB_DEVICE definition
  PCI: designware: Add driver for prototyping kits based on ARC SDP
  PCI: designware: Add default link up check if sub-driver doesn't override
  PCI: designware: Add generic dw_pcie_wait_for_link()
  PCI: Cleanup pci/pcie/Kconfig whitespace
  PCI: Simplify pci_create_attr() control flow
  PCI: Don't leak memory if sysfs_create_bin_file() fails
  PCI: Simplify sysfs ROM cleanup
  PCI: Remove unused IORESOURCE_ROM_COPY and IORESOURCE_ROM_BIOS_COPY
  MIPS: Loongson 3: Keep CPU physical (not virtual) addresses in shadow ROM resource
  MIPS: Loongson 3: Use temporary struct resource * to avoid repetition
  ia64/PCI: Keep CPU physical (not virtual) addresses in shadow ROM resource
  ia64/PCI: Use ioremap() instead of open-coded equivalent
  ia64/PCI: Use temporary struct resource * to avoid repetition
  PCI: Clean up pci_map_rom() whitespace
  PCI: Remove arch-specific IORESOURCE_ROM_SHADOW size from sysfs
  PCI: thunder: Add driver for ThunderX-pass{1,2} on-chip devices
  PCI: thunder: Add PCIe host driver for ThunderX processors
  PCI: generic: Expose pci_host_common_probe() for use by other drivers
  PCI: generic: Add pci_host_common_probe(), based on gen_pci_probe()
  ...
parents 277edbab 6e6f498b
......@@ -28,3 +28,20 @@ Optional properties:
- clock-names: Must include the following entries:
- "pcie"
- "pcie_bus"
Example configuration:
pcie: pcie@0xdffff000 {
compatible = "snps,dw-pcie";
reg = <0xdffff000 0x1000>, /* Controller registers */
<0xd0000000 0x2000>; /* PCI config space */
reg-names = "ctrlreg", "config";
#address-cells = <3>;
#size-cells = <2>;
device_type = "pci";
ranges = <0x81000000 0 0x00000000 0xde000000 0 0x00010000
0x82000000 0 0xd0400000 0xd0400000 0 0x0d000000>;
interrupts = <25>, <24>;
#interrupt-cells = <1>;
num-lanes = <1>;
};
......@@ -13,6 +13,13 @@ Required properties:
- clock-names: Must include the following additional entries:
- "pcie_phy"
Optional properties:
- fsl,tx-deemph-gen1: Gen1 De-emphasis value. Default: 0
- fsl,tx-deemph-gen2-3p5db: Gen2 (3.5db) De-emphasis value. Default: 0
- fsl,tx-deemph-gen2-6db: Gen2 (6db) De-emphasis value. Default: 20
- fsl,tx-swing-full: Gen2 TX SWING FULL value. Default: 127
- fsl,tx-swing-low: TX launch amplitude swing_low value. Default: 127
Example:
pcie@0x01000000 {
......
* ThunderX PCI host controller for pass-1.x silicon
Firmware-initialized PCI host controller to on-chip devices found on
some Cavium ThunderX processors. These devices have ECAM-based config
access, but the BARs are all at fixed addresses. We handle the fixed
addresses by synthesizing Enhanced Allocation (EA) capabilities for
these devices.
The properties and their meanings are identical to those described in
host-generic-pci.txt except as listed below.
Properties of the host controller node that differ from
host-generic-pci.txt:
- compatible : Must be "cavium,pci-host-thunder-ecam"
Example:
pcie@84b000000000 {
compatible = "cavium,pci-host-thunder-ecam";
device_type = "pci";
msi-parent = <&its>;
msi-map = <0 &its 0x30000 0x10000>;
bus-range = <0 31>;
#size-cells = <2>;
#address-cells = <3>;
#stream-id-cells = <1>;
reg = <0x84b0 0x00000000 0 0x02000000>; /* Configuration space */
ranges = <0x03000000 0x8180 0x00000000 0x8180 0x00000000 0x80 0x00000000>; /* mem ranges */
};
* ThunderX PEM PCIe host controller
Firmware-initialized PCI host controller found on some Cavium
ThunderX processors.
The properties and their meanings are identical to those described in
host-generic-pci.txt except as listed below.
Properties of the host controller node that differ from
host-generic-pci.txt:
- compatible : Must be "cavium,pci-host-thunder-pem"
- reg : Two entries: First the configuration space for down
stream devices base address and size, as accessed
from the parent bus. Second, the register bank of
the PEM device PCIe bridge.
Example:
pci@87e0,c2000000 {
compatible = "cavium,pci-host-thunder-pem";
device_type = "pci";
msi-parent = <&its>;
msi-map = <0 &its 0x10000 0x10000>;
bus-range = <0x8f 0xc7>;
#size-cells = <2>;
#address-cells = <3>;
reg = <0x8880 0x8f000000 0x0 0x39000000>, /* Configuration space */
<0x87e0 0xc2000000 0x0 0x00010000>; /* PEM space */
ranges = <0x01000000 0x00 0x00020000 0x88b0 0x00020000 0x00 0x00010000>, /* I/O */
<0x03000000 0x00 0x10000000 0x8890 0x10000000 0x0f 0xf0000000>, /* mem64 */
<0x43000000 0x10 0x00000000 0x88a0 0x00000000 0x10 0x00000000>, /* mem64-pref */
<0x03000000 0x87e0 0xc2f00000 0x87e0 0xc2000000 0x00 0x00100000>; /* mem64 PEM BAR4 */
#interrupt-cells = <1>;
interrupt-map-mask = <0 0 0 7>;
interrupt-map = <0 0 0 1 &gic0 0 0 0 24 4>, /* INTA */
<0 0 0 2 &gic0 0 0 0 25 4>, /* INTB */
<0 0 0 3 &gic0 0 0 0 26 4>, /* INTC */
<0 0 0 4 &gic0 0 0 0 27 4>; /* INTD */
};
* Xilinx NWL PCIe Root Port Bridge DT description
Required properties:
- compatible: Should contain "xlnx,nwl-pcie-2.11"
- #address-cells: Address representation for root ports, set to <3>
- #size-cells: Size representation for root ports, set to <2>
- #interrupt-cells: specifies the number of cells needed to encode an
interrupt source. The value must be 1.
- reg: Should contain Bridge, PCIe Controller registers location,
configuration space, and length
- reg-names: Must include the following entries:
"breg": bridge registers
"pcireg": PCIe controller registers
"cfg": configuration space region
- device_type: must be "pci"
- interrupts: Should contain NWL PCIe interrupt
- interrupt-names: Must include the following entries:
"msi1, msi0": interrupt asserted when MSI is received
"intx": interrupt asserted when a legacy interrupt is received
"misc": interrupt asserted when miscellaneous is received
- interrupt-map-mask and interrupt-map: standard PCI properties to define the
mapping of the PCI interface to interrupt numbers.
- ranges: ranges for the PCI memory regions (I/O space region is not
supported by hardware)
Please refer to the standard PCI bus binding document for a more
detailed explanation
- msi-controller: indicates that this is MSI controller node
- msi-parent: MSI parent of the root complex itself
- legacy-interrupt-controller: Interrupt controller device node for Legacy interrupts
- interrupt-controller: identifies the node as an interrupt controller
- #interrupt-cells: should be set to 1
- #address-cells: specifies the number of cells needed to encode an
address. The value must be 0.
Example:
++++++++
nwl_pcie: pcie@fd0e0000 {
#address-cells = <3>;
#size-cells = <2>;
compatible = "xlnx,nwl-pcie-2.11";
#interrupt-cells = <1>;
msi-controller;
device_type = "pci";
interrupt-parent = <&gic>;
interrupts = <0 114 4>, <0 115 4>, <0 116 4>, <0 117 4>, <0 118 4>;
interrupt-names = "msi0", "msi1", "intx", "dummy", "misc";
interrupt-map-mask = <0x0 0x0 0x0 0x7>;
interrupt-map = <0x0 0x0 0x0 0x1 &pcie_intc 0x1>,
<0x0 0x0 0x0 0x2 &pcie_intc 0x2>,
<0x0 0x0 0x0 0x3 &pcie_intc 0x3>,
<0x0 0x0 0x0 0x4 &pcie_intc 0x4>;
msi-parent = <&nwl_pcie>;
reg = <0x0 0xfd0e0000 0x0 0x1000>,
<0x0 0xfd480000 0x0 0x1000>,
<0x0 0xe0000000 0x0 0x1000000>;
reg-names = "breg", "pcireg", "cfg";
ranges = <0x02000000 0x00000000 0xe1000000 0x00000000 0xe1000000 0 0x0f000000>;
pcie_intc: legacy-interrupt-controller {
interrupt-controller;
#address-cells = <0>;
#interrupt-cells = <1>;
};
};
......@@ -17,7 +17,7 @@ Required properties:
Please refer to the standard PCI bus binding document for a more
detailed explanation
Optional properties:
Optional properties for Zynq/Microblaze:
- bus-range: PCI bus numbers covered
Interrupt controller child node
......@@ -38,13 +38,13 @@ the four INTx interrupts in ISR and route them to this domain.
Example:
++++++++
Zynq:
pci_express: axi-pcie@50000000 {
#address-cells = <3>;
#size-cells = <2>;
#interrupt-cells = <1>;
compatible = "xlnx,axi-pcie-host-1.00.a";
reg = < 0x50000000 0x10000000 >;
reg = < 0x50000000 0x1000000 >;
device_type = "pci";
interrupts = < 0 52 4 >;
interrupt-map-mask = <0 0 0 7>;
......@@ -60,3 +60,29 @@ Example:
#interrupt-cells = <1>;
};
};
Microblaze:
pci_express: axi-pcie@10000000 {
#address-cells = <3>;
#size-cells = <2>;
#interrupt-cells = <1>;
compatible = "xlnx,axi-pcie-host-1.00.a";
reg = <0x10000000 0x4000000>;
device_type = "pci";
interrupt-parent = <&microblaze_0_intc>;
interrupts = <1 2>;
interrupt-map-mask = <0 0 0 7>;
interrupt-map = <0 0 0 1 &pcie_intc 1>,
<0 0 0 2 &pcie_intc 2>,
<0 0 0 3 &pcie_intc 3>,
<0 0 0 4 &pcie_intc 4>;
ranges = <0x02000000 0x00000000 0x80000000 0x80000000 0x00000000 0x10000000>;
pcie_intc: interrupt-controller {
interrupt-controller;
#address-cells = <0>;
#interrupt-cells = <1>;
};
};
......@@ -5205,6 +5205,7 @@ F: arch/x86/kernel/cpu/mshyperv.c
F: drivers/hid/hid-hyperv.c
F: drivers/hv/
F: drivers/input/serio/hyperv-keyboard.c
F: drivers/pci/host/pci-hyperv.c
F: drivers/net/hyperv/
F: drivers/scsi/storvsc_drv.c
F: drivers/video/fbdev/hyperv_fb.c
......@@ -8383,12 +8384,20 @@ L: linux-pci@vger.kernel.org
S: Maintained
F: drivers/pci/host/*designware*
PCI DRIVER FOR SYNOPSYS PROTOTYPING DEVICE
M: Joao Pinto <jpinto@synopsys.com>
L: linux-pci@vger.kernel.org
S: Maintained
F: Documentation/devicetree/bindings/pci/designware-pcie.txt
F: drivers/pci/host/pcie-designware-plat.c
PCI DRIVER FOR GENERIC OF HOSTS
M: Will Deacon <will.deacon@arm.com>
L: linux-pci@vger.kernel.org
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
S: Maintained
F: Documentation/devicetree/bindings/pci/host-generic-pci.txt
F: drivers/pci/host/pci-host-common.c
F: drivers/pci/host/pci-host-generic.c
PCI DRIVER FOR INTEL VOLUME MANAGEMENT DEVICE (VMD)
......@@ -8434,6 +8443,14 @@ L: linux-arm-msm@vger.kernel.org
S: Maintained
F: drivers/pci/host/*qcom*
PCIE DRIVER FOR CAVIUM THUNDERX
M: David Daney <david.daney@cavium.com>
L: linux-pci@vger.kernel.org
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
S: Supported
F: Documentation/devicetree/bindings/pci/pci-thunder-*
F: drivers/pci/host/pci-thunder-*
PCMCIA SUBSYSTEM
P: Linux PCMCIA Team
L: linux-pcmcia@lists.infradead.org
......
......@@ -7,7 +7,6 @@
#include <linux/dma-mapping.h>
#include <linux/scatterlist.h>
#include <asm/machvec.h>
#include <asm-generic/pci-bridge.h>
/*
* The following structure is used to manage multiple PCI busses.
......@@ -66,13 +65,6 @@ extern void pcibios_set_master(struct pci_dev *dev);
decisions. */
#define PCI_DMA_BUS_IS_PHYS 0
#ifdef CONFIG_PCI
/* implement the pci_ DMA API in terms of the generic device dma_ one */
#include <asm-generic/pci-dma-compat.h>
#endif
/* TODO: integrate with include/asm-generic/pci.h ? */
static inline int pci_get_legacy_ide_irq(struct pci_dev *dev, int channel)
{
......
......@@ -17,6 +17,7 @@ config ARC
select GENERIC_FIND_FIRST_BIT
# for now, we don't need GENERIC_IRQ_PROBE, CONFIG_GENERIC_IRQ_CHIP
select GENERIC_IRQ_SHOW
select GENERIC_PCI_IOMAP
select GENERIC_PENDING_IRQ if SMP
select GENERIC_SMP_IDLE_THREAD
select HAVE_ARCH_KGDB
......@@ -37,6 +38,9 @@ config ARC
select PERF_USE_VMALLOC
select HAVE_DEBUG_STACKOVERFLOW
config MIGHT_HAVE_PCI
bool
config TRACE_IRQFLAGS_SUPPORT
def_bool y
......@@ -569,6 +573,28 @@ config FORCE_MAX_ZONEORDER
source "net/Kconfig"
source "drivers/Kconfig"
menu "Bus Support"
config PCI
bool "PCI support" if MIGHT_HAVE_PCI
help
PCI is the name of a bus system, i.e., the way the CPU talks to
the other stuff inside your box. Find out if your board/platform
has PCI.
Note: PCIe support for Synopsys Device will be available only
when HAPS DX is configured with PCIe RC bitmap. If you have PCI,
say Y, otherwise N.
config PCI_SYSCALL
def_bool PCI
source "drivers/pci/Kconfig"
source "drivers/pci/pcie/Kconfig"
endmenu
source "fs/Kconfig"
source "arch/arc/Kconfig.debug"
source "security/Kconfig"
......
......@@ -10,5 +10,10 @@
#define ASM_ARC_DMA_H
#define MAX_DMA_ADDRESS 0xC0000000
#ifdef CONFIG_PCI
extern int isa_dma_bridge_buggy;
#else
#define isa_dma_bridge_buggy 0
#endif
#endif
......@@ -16,6 +16,15 @@
extern void __iomem *ioremap(unsigned long physaddr, unsigned long size);
extern void __iomem *ioremap_prot(phys_addr_t offset, unsigned long size,
unsigned long flags);
static inline void __iomem *ioport_map(unsigned long port, unsigned int nr)
{
return (void __iomem *)port;
}
static inline void ioport_unmap(void __iomem *addr)
{
}
extern void iounmap(const void __iomem *addr);
#define ioremap_nocache(phy, sz) ioremap(phy, sz)
......
/*
* Copyright (C) 2015-2016 Synopsys, Inc. (www.synopsys.com)
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#ifndef _ASM_ARC_PCI_H
#define _ASM_ARC_PCI_H
#ifdef __KERNEL__
#include <linux/ioport.h>
#define PCIBIOS_MIN_IO 0x100
#define PCIBIOS_MIN_MEM 0x100000
#define pcibios_assign_all_busses() 1
/*
* The PCI address space does equal the physical memory address space.
* The networking and block device layers use this boolean for bounce
* buffer decisions.
*/
#define PCI_DMA_BUS_IS_PHYS 1
#endif /* __KERNEL__ */
#endif /* _ASM_ARC_PCI_H */
......@@ -12,6 +12,7 @@ obj-y := arcksyms.o setup.o irq.o time.o reset.o ptrace.o process.o devtree.o
obj-y += signal.o traps.o sys.o troubleshoot.o stacktrace.o disasm.o clk.o
obj-$(CONFIG_ISA_ARCOMPACT) += entry-compact.o intc-compact.o
obj-$(CONFIG_ISA_ARCV2) += entry-arcv2.o intc-arcv2.o
obj-$(CONFIG_PCI) += pcibios.o
obj-$(CONFIG_MODULES) += arcksyms.o module.o
obj-$(CONFIG_SMP) += smp.o
......
/*
* Copyright (C) 2014-2015 Synopsys, Inc. (www.synopsys.com)
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/pci.h>
/*
* We don't have to worry about legacy ISA devices, so nothing to do here
*/
resource_size_t pcibios_align_resource(void *data, const struct resource *res,
resource_size_t size, resource_size_t align)
{
return res->start;
}
void pcibios_fixup_bus(struct pci_bus *bus)
{
}
......@@ -11,6 +11,7 @@ menuconfig ARC_PLAT_AXS10X
select DW_APB_ICTL
select GPIO_DWAPB
select OF_GPIO
select MIGHT_HAVE_PCI
select GENERIC_IRQ_CHIP
select ARCH_REQUIRE_GPIOLIB
help
......
......@@ -1212,7 +1212,6 @@ config PCI_HOST_ITE8152
select DMABOUNCE
source "drivers/pci/Kconfig"
source "drivers/pci/pcie/Kconfig"
source "drivers/pcmcia/Kconfig"
......
......@@ -2,9 +2,6 @@
#define ASMARM_PCI_H
#ifdef __KERNEL__
#include <asm-generic/pci-dma-compat.h>
#include <asm-generic/pci-bridge.h>
#include <asm/mach/pci.h> /* for pci_sys_data */
extern unsigned long pcibios_min_io;
......@@ -41,5 +38,4 @@ static inline int pci_get_legacy_ide_irq(struct pci_dev *dev, int channel)
}
#endif /* __KERNEL__ */
#endif
......@@ -235,8 +235,6 @@ config PCI_SYSCALL
def_bool PCI
source "drivers/pci/Kconfig"
source "drivers/pci/pcie/Kconfig"
source "drivers/pci/hotplug/Kconfig"
endmenu
......
generic-y += bug.h
generic-y += bugs.h
generic-y += checksum.h
......@@ -31,7 +29,6 @@ generic-y += msgbuf.h
generic-y += msi.h
generic-y += mutex.h
generic-y += pci.h
generic-y += pci-bridge.h
generic-y += poll.h
generic-y += preempt.h
generic-y += resource.h
......
......@@ -7,8 +7,6 @@
#include <linux/dma-mapping.h>
#include <asm/io.h>
#include <asm-generic/pci-bridge.h>
#include <asm-generic/pci-dma-compat.h>
#define PCIBIOS_MIN_IO 0x1000
#define PCIBIOS_MIN_MEM 0
......
Markdown is supported
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment