Commit 62d0b336 authored by vikram pandita's avatar vikram pandita Committed by Tony Lindgren
Browse files

omap3: zoom: rename zoom2 name to generic zoom



Replace zoom2 with zoom name in board-zoom-peripherals.c file
and board-zoom-debugboard.c. Create mach/board-zoom.h.

This file has functions reused for boards: Zoom2/Zoom3/sdp3630.
Hence have all functions commonly named as zoom
Signed-off-by: default avatarVikram Pandita <vikram.pandita@ti.com>
Signed-off-by: default avatarTony Lindgren <tony@atomide.com>
parent 479f12c9
......@@ -16,18 +16,18 @@
#include <plat/gpmc.h>
#define ZOOM2_SMSC911X_CS 7
#define ZOOM2_SMSC911X_GPIO 158
#define ZOOM2_QUADUART_CS 3
#define ZOOM2_QUADUART_GPIO 102
#define ZOOM_SMSC911X_CS 7
#define ZOOM_SMSC911X_GPIO 158
#define ZOOM_QUADUART_CS 3
#define ZOOM_QUADUART_GPIO 102
#define QUART_CLK 1843200
#define DEBUG_BASE 0x08000000
#define ZOOM2_ETHR_START DEBUG_BASE
#define ZOOM_ETHR_START DEBUG_BASE
static struct resource zoom2_smsc911x_resources[] = {
static struct resource zoom_smsc911x_resources[] = {
[0] = {
.start = ZOOM2_ETHR_START,
.end = ZOOM2_ETHR_START + SZ_4K,
.start = ZOOM_ETHR_START,
.end = ZOOM_ETHR_START + SZ_4K,
.flags = IORESOURCE_MEM,
},
[1] = {
......@@ -35,42 +35,42 @@ static struct resource zoom2_smsc911x_resources[] = {
},
};
static struct smsc911x_platform_config zoom2_smsc911x_config = {
static struct smsc911x_platform_config zoom_smsc911x_config = {
.irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
.irq_type = SMSC911X_IRQ_TYPE_OPEN_DRAIN,
.flags = SMSC911X_USE_32BIT,
.phy_interface = PHY_INTERFACE_MODE_MII,
};
static struct platform_device zoom2_smsc911x_device = {
static struct platform_device zoom_smsc911x_device = {
.name = "smsc911x",
.id = -1,
.num_resources = ARRAY_SIZE(zoom2_smsc911x_resources),
.resource = zoom2_smsc911x_resources,
.num_resources = ARRAY_SIZE(zoom_smsc911x_resources),
.resource = zoom_smsc911x_resources,
.dev = {
.platform_data = &zoom2_smsc911x_config,
.platform_data = &zoom_smsc911x_config,
},
};
static inline void __init zoom2_init_smsc911x(void)
static inline void __init zoom_init_smsc911x(void)
{
int eth_cs;
unsigned long cs_mem_base;
int eth_gpio = 0;
eth_cs = ZOOM2_SMSC911X_CS;
eth_cs = ZOOM_SMSC911X_CS;
if (gpmc_cs_request(eth_cs, SZ_16M, &cs_mem_base) < 0) {
printk(KERN_ERR "Failed to request GPMC mem for smsc911x\n");
return;
}
zoom2_smsc911x_resources[0].start = cs_mem_base + 0x0;
zoom2_smsc911x_resources[0].end = cs_mem_base + 0xff;
zoom_smsc911x_resources[0].start = cs_mem_base + 0x0;
zoom_smsc911x_resources[0].end = cs_mem_base + 0xff;
eth_gpio = ZOOM2_SMSC911X_GPIO;
eth_gpio = ZOOM_SMSC911X_GPIO;
zoom2_smsc911x_resources[1].start = OMAP_GPIO_IRQ(eth_gpio);
zoom_smsc911x_resources[1].start = OMAP_GPIO_IRQ(eth_gpio);
if (gpio_request(eth_gpio, "smsc911x irq") < 0) {
printk(KERN_ERR "Failed to request GPIO%d for smsc911x IRQ\n",
......@@ -94,7 +94,7 @@ static struct plat_serial8250_port serial_platform_data[] = {
}
};
static struct platform_device zoom2_debugboard_serial_device = {
static struct platform_device zoom_debugboard_serial_device = {
.name = "serial8250",
.id = 3,
.dev = {
......@@ -102,13 +102,13 @@ static struct platform_device zoom2_debugboard_serial_device = {
},
};
static inline void __init zoom2_init_quaduart(void)
static inline void __init zoom_init_quaduart(void)
{
int quart_cs;
unsigned long cs_mem_base;
int quart_gpio = 0;
quart_cs = ZOOM2_QUADUART_CS;
quart_cs = ZOOM_QUADUART_CS;
if (gpmc_cs_request(quart_cs, SZ_1M, &cs_mem_base) < 0) {
printk(KERN_ERR "Failed to request GPMC mem"
......@@ -116,7 +116,7 @@ static inline void __init zoom2_init_quaduart(void)
return;
}
quart_gpio = ZOOM2_QUADUART_GPIO;
quart_gpio = ZOOM_QUADUART_GPIO;
if (gpio_request(quart_gpio, "TL16CP754C GPIO") < 0) {
printk(KERN_ERR "Failed to request GPIO%d for TL16CP754C\n",
......@@ -126,15 +126,15 @@ static inline void __init zoom2_init_quaduart(void)
gpio_direction_input(quart_gpio);
}
static inline int omap_zoom2_debugboard_detect(void)
static inline int omap_zoom_debugboard_detect(void)
{
int debug_board_detect = 0;
int ret = 1;
debug_board_detect = ZOOM2_SMSC911X_GPIO;
debug_board_detect = ZOOM_SMSC911X_GPIO;
if (gpio_request(debug_board_detect, "Zoom2 debug board detect") < 0) {
printk(KERN_ERR "Failed to request GPIO%d for Zoom2 debug"
if (gpio_request(debug_board_detect, "Zoom debug board detect") < 0) {
printk(KERN_ERR "Failed to request GPIO%d for Zoom debug"
"board detect\n", debug_board_detect);
return 0;
}
......@@ -147,17 +147,17 @@ static inline int omap_zoom2_debugboard_detect(void)
return ret;
}
static struct platform_device *zoom2_devices[] __initdata = {
&zoom2_smsc911x_device,
&zoom2_debugboard_serial_device,
static struct platform_device *zoom_devices[] __initdata = {
&zoom_smsc911x_device,
&zoom_debugboard_serial_device,
};
int __init omap_zoom2_debugboard_init(void)
int __init zoom_debugboard_init(void)
{
if (!omap_zoom2_debugboard_detect())
if (!omap_zoom_debugboard_detect())
return 0;
zoom2_init_smsc911x();
zoom2_init_quaduart();
return platform_add_devices(zoom2_devices, ARRAY_SIZE(zoom2_devices));
zoom_init_smsc911x();
zoom_init_quaduart();
return platform_add_devices(zoom_devices, ARRAY_SIZE(zoom_devices));
}
......@@ -86,27 +86,27 @@ static struct matrix_keymap_data board_map_data = {
.keymap_size = ARRAY_SIZE(board_keymap),
};
static struct twl4030_keypad_data zoom2_kp_twl4030_data = {
static struct twl4030_keypad_data zoom_kp_twl4030_data = {
.keymap_data = &board_map_data,
.rows = 8,
.cols = 8,
.rep = 1,
};
static struct regulator_consumer_supply zoom2_vmmc1_supply = {
static struct regulator_consumer_supply zoom_vmmc1_supply = {
.supply = "vmmc",
};
static struct regulator_consumer_supply zoom2_vsim_supply = {
static struct regulator_consumer_supply zoom_vsim_supply = {
.supply = "vmmc_aux",
};
static struct regulator_consumer_supply zoom2_vmmc2_supply = {
static struct regulator_consumer_supply zoom_vmmc2_supply = {
.supply = "vmmc",
};
/* VMMC1 for OMAP VDD_MMC1 (i/o) and MMC1 card */
static struct regulator_init_data zoom2_vmmc1 = {
static struct regulator_init_data zoom_vmmc1 = {
.constraints = {
.min_uV = 1850000,
.max_uV = 3150000,
......@@ -117,11 +117,11 @@ static struct regulator_init_data zoom2_vmmc1 = {
| REGULATOR_CHANGE_STATUS,
},
.num_consumer_supplies = 1,
.consumer_supplies = &zoom2_vmmc1_supply,
.consumer_supplies = &zoom_vmmc1_supply,
};
/* VMMC2 for MMC2 card */
static struct regulator_init_data zoom2_vmmc2 = {
static struct regulator_init_data zoom_vmmc2 = {
.constraints = {
.min_uV = 1850000,
.max_uV = 1850000,
......@@ -132,11 +132,11 @@ static struct regulator_init_data zoom2_vmmc2 = {
| REGULATOR_CHANGE_STATUS,
},
.num_consumer_supplies = 1,
.consumer_supplies = &zoom2_vmmc2_supply,
.consumer_supplies = &zoom_vmmc2_supply,
};
/* VSIM for OMAP VDD_MMC1A (i/o for DAT4..DAT7) */
static struct regulator_init_data zoom2_vsim = {
static struct regulator_init_data zoom_vsim = {
.constraints = {
.min_uV = 1800000,
.max_uV = 3000000,
......@@ -147,7 +147,7 @@ static struct regulator_init_data zoom2_vsim = {
| REGULATOR_CHANGE_STATUS,
},
.num_consumer_supplies = 1,
.consumer_supplies = &zoom2_vsim_supply,
.consumer_supplies = &zoom_vsim_supply,
};
static struct twl4030_hsmmc_info mmc[] __initdata = {
......@@ -164,7 +164,7 @@ static struct twl4030_hsmmc_info mmc[] __initdata = {
{} /* Terminator */
};
static int zoom2_twl_gpio_setup(struct device *dev,
static int zoom_twl_gpio_setup(struct device *dev,
unsigned gpio, unsigned ngpio)
{
/* gpio + 0 is "mmc0_cd" (input/IRQ),
......@@ -177,15 +177,15 @@ static int zoom2_twl_gpio_setup(struct device *dev,
/* link regulators to MMC adapters ... we "know" the
* regulators will be set up only *after* we return.
*/
zoom2_vmmc1_supply.dev = mmc[0].dev;
zoom2_vsim_supply.dev = mmc[0].dev;
zoom2_vmmc2_supply.dev = mmc[1].dev;
zoom_vmmc1_supply.dev = mmc[0].dev;
zoom_vsim_supply.dev = mmc[0].dev;
zoom_vmmc2_supply.dev = mmc[1].dev;
return 0;
}
static int zoom2_batt_table[] = {
static int zoom_batt_table[] = {
/* 0 C*/
30800, 29500, 28300, 27100,
26000, 24900, 23900, 22900, 22000, 21100, 20300, 19400, 18700, 17900,
......@@ -196,65 +196,64 @@ static int zoom2_batt_table[] = {
4040, 3910, 3790, 3670, 3550
};
static struct twl4030_bci_platform_data zoom2_bci_data = {
.battery_tmp_tbl = zoom2_batt_table,
.tblsize = ARRAY_SIZE(zoom2_batt_table),
static struct twl4030_bci_platform_data zoom_bci_data = {
.battery_tmp_tbl = zoom_batt_table,
.tblsize = ARRAY_SIZE(zoom_batt_table),
};
static struct twl4030_usb_data zoom2_usb_data = {
static struct twl4030_usb_data zoom_usb_data = {
.usb_mode = T2_USB_MODE_ULPI,
};
static struct twl4030_gpio_platform_data zoom2_gpio_data = {
static struct twl4030_gpio_platform_data zoom_gpio_data = {
.gpio_base = OMAP_MAX_GPIO_LINES,
.irq_base = TWL4030_GPIO_IRQ_BASE,
.irq_end = TWL4030_GPIO_IRQ_END,
.setup = zoom2_twl_gpio_setup,
.setup = zoom_twl_gpio_setup,
};
static struct twl4030_madc_platform_data zoom2_madc_data = {
static struct twl4030_madc_platform_data zoom_madc_data = {
.irq_line = 1,
};
static struct twl4030_codec_audio_data zoom2_audio_data = {
static struct twl4030_codec_audio_data zoom_audio_data = {
.audio_mclk = 26000000,
};
static struct twl4030_codec_data zoom2_codec_data = {
static struct twl4030_codec_data zoom_codec_data = {
.audio_mclk = 26000000,
.audio = &zoom2_audio_data,
.audio = &zoom_audio_data,
};
static struct twl4030_platform_data zoom2_twldata = {
static struct twl4030_platform_data zoom_twldata = {
.irq_base = TWL4030_IRQ_BASE,
.irq_end = TWL4030_IRQ_END,
/* platform_data for children goes here */
.bci = &zoom2_bci_data,
.madc = &zoom2_madc_data,
.usb = &zoom2_usb_data,
.gpio = &zoom2_gpio_data,
.keypad = &zoom2_kp_twl4030_data,
.codec = &zoom2_codec_data,
.vmmc1 = &zoom2_vmmc1,
.vmmc2 = &zoom2_vmmc2,
.vsim = &zoom2_vsim,
.bci = &zoom_bci_data,
.madc = &zoom_madc_data,
.usb = &zoom_usb_data,
.gpio = &zoom_gpio_data,
.keypad = &zoom_kp_twl4030_data,
.codec = &zoom_codec_data,
.vmmc2 = &zoom_vmmc2,
.vsim = &zoom_vsim,
};
static struct i2c_board_info __initdata zoom2_i2c_boardinfo[] = {
static struct i2c_board_info __initdata zoom_i2c_boardinfo[] = {
{
I2C_BOARD_INFO("twl4030", 0x48),
.flags = I2C_CLIENT_WAKE,
.irq = INT_34XX_SYS_NIRQ,
.platform_data = &zoom2_twldata,
.platform_data = &zoom_twldata,
},
};
static int __init omap_i2c_init(void)
{
omap_register_i2c_bus(1, 2600, zoom2_i2c_boardinfo,
ARRAY_SIZE(zoom2_i2c_boardinfo));
omap_register_i2c_bus(1, 2600, zoom_i2c_boardinfo,
ARRAY_SIZE(zoom_i2c_boardinfo));
omap_register_i2c_bus(2, 400, NULL, 0);
omap_register_i2c_bus(3, 400, NULL, 0);
return 0;
......
......@@ -21,6 +21,8 @@
#include <plat/common.h>
#include <plat/board.h>
#include <mach/board-zoom.h>
#include "sdram-micron-mt46h32m32lf-6.h"
static void __init omap_zoom2_init_irq(void)
......@@ -56,13 +58,10 @@ static struct twl4030_platform_data zoom2_twldata = {
#endif
extern int __init omap_zoom2_debugboard_init(void);
extern void __init zoom_peripherals_init(void);
static void __init omap_zoom2_init(void)
{
zoom_peripherals_init();
omap_zoom2_debugboard_init();
zoom_debugboard_init();
}
static void __init omap_zoom2_map_io(void)
......
/*
* Defines for zoom boards
*/
extern int __init zoom_debugboard_init(void);
extern void __init zoom_peripherals_init(void);
Markdown is supported
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment