Commit 6075e9df authored by Linus Walleij's avatar Linus Walleij Committed by Russell King
Browse files

ARM: 6949/2: mach-u300: fix compilaton warning in IO accessors



The IO accessors for U300 were using u32 rather than the nominal
void __iomem * type, rectify this by properly defining the
virtual base for statically mapped peripherals to be
void __iomem *. Requires fixing a field in struct clk as well.

Signed-off-by: default avatarLinus Walleij <linus.walleij@linaro.org>
Signed-off-by: default avatarRussell King <rmk+kernel@arm.linux.org.uk>
parent a0a54d37
......@@ -31,7 +31,7 @@ struct clk {
bool reset;
__u16 clk_val;
__s8 usecount;
__u32 res_reg;
void __iomem * res_reg;
__u16 res_mask;
bool hw_ctrld;
......
......@@ -18,6 +18,12 @@
* the defines are used for setting up the I/O memory mapping.
*/
#ifdef __ASSEMBLER__
#define IOMEM(a) (a)
#else
#define IOMEM(a) (void __iomem *) a
#endif
/* NAND Flash CS0 */
#define U300_NAND_CS0_PHYS_BASE 0x80000000
......@@ -47,13 +53,6 @@
#define U300_SEMI_CONFIG_BASE 0x30000000
#endif
/*
* All the following peripherals are specified at their PHYSICAL address,
* so if you need to access them (in the kernel), you MUST use the macros
* defined in <asm/io.h> to map to the IO_ADDRESS_AHB() IO_ADDRESS_FAST()
* etc.
*/
/*
* AHB peripherals
*/
......@@ -63,11 +62,11 @@
/* Vectored Interrupt Controller 0, servicing 32 interrupts */
#define U300_INTCON0_BASE (U300_AHB_PER_PHYS_BASE+0x1000)
#define U300_INTCON0_VBASE (U300_AHB_PER_VIRT_BASE+0x1000)
#define U300_INTCON0_VBASE IOMEM(U300_AHB_PER_VIRT_BASE+0x1000)
/* Vectored Interrupt Controller 1, servicing 32 interrupts */
#define U300_INTCON1_BASE (U300_AHB_PER_PHYS_BASE+0x2000)
#define U300_INTCON1_VBASE (U300_AHB_PER_VIRT_BASE+0x2000)
#define U300_INTCON1_VBASE IOMEM(U300_AHB_PER_VIRT_BASE+0x2000)
/* Memory Stick Pro (MSPRO) controller */
#define U300_MSPRO_BASE (U300_AHB_PER_PHYS_BASE+0x3000)
......@@ -115,7 +114,7 @@
/* SYSCON */
#define U300_SYSCON_BASE (U300_SLOW_PER_PHYS_BASE+0x1000)
#define U300_SYSCON_VBASE (U300_SLOW_PER_VIRT_BASE+0x1000)
#define U300_SYSCON_VBASE IOMEM(U300_SLOW_PER_VIRT_BASE+0x1000)
/* Watchdog */
#define U300_WDOG_BASE (U300_SLOW_PER_PHYS_BASE+0x2000)
......@@ -125,7 +124,7 @@
/* APP side special timer */
#define U300_TIMER_APP_BASE (U300_SLOW_PER_PHYS_BASE+0x4000)
#define U300_TIMER_APP_VBASE (U300_SLOW_PER_VIRT_BASE+0x4000)
#define U300_TIMER_APP_VBASE IOMEM(U300_SLOW_PER_VIRT_BASE+0x4000)
/* Keypad */
#define U300_KEYPAD_BASE (U300_SLOW_PER_PHYS_BASE+0x5000)
......@@ -181,5 +180,4 @@
* Virtual accessor macros for static devices
*/
#endif
Supports Markdown
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment