Commit 58a5491c authored by Felipe Balbi's avatar Felipe Balbi Committed by Tony Lindgren
Browse files

omap: Add platform init code for EHCI driver



Add platform init code for EHCI driver.

Various fixes to the original patch by Ajay Kumar Gupta <ajay.gupta@ti.com>
and Anand Gadiyar <gadiyar@ti.com>.

Overo support added by Olof Johansson <olof@lixom.net>
Beagle support added by Koen Kooi <koen@beagleboard.org>
CM-T32 support added by Mike Rapoport <mike@compulab.co.il>
Signed-off-by: default avatarSigned-off-by: Olof Johansson <olof@lixom.net>
Acked-by: default avatarSteve Sakoman <steve@sakoman.com>
Signed-off-by: default avatarKoen Kooi <koen@beagleboard.org>
Signed-off-by: default avatarMike Rapoport <mike@compulab.co.il>
Signed-off-by: default avatarAjay Kumar Gupta <ajay.gupta@ti.com>
Signed-off-by: default avatarAnand Gadiyar <gadiyar@ti.com>
Signed-off-by: default avatarFelipe Balbi <felipe.balbi@nokia.com>
Signed-off-by: default avatarTony Lindgren <tony@atomide.com>
parent 83720a82
......@@ -80,6 +80,7 @@ obj-$(CONFIG_MACH_OMAP_4430SDP) += board-4430sdp.o
# Platform specific device init code
obj-y += usb-musb.o
obj-$(CONFIG_MACH_OMAP2_TUSB6010) += usb-tusb6010.o
obj-y += usb-ehci.o
onenand-$(CONFIG_MTD_ONENAND_OMAP2) := gpmc-onenand.o
obj-y += $(onenand-m) $(onenand-y)
......
......@@ -494,6 +494,18 @@ static void enable_board_wakeup_source(void)
omap_cfg_reg(AF26_34XX_SYS_NIRQ); /* T2 interrupt line (keypad) */
}
static struct ehci_hcd_omap_platform_data ehci_pdata __initconst = {
.port_mode[0] = EHCI_HCD_OMAP_MODE_PHY,
.port_mode[1] = EHCI_HCD_OMAP_MODE_PHY,
.port_mode[2] = EHCI_HCD_OMAP_MODE_UNKNOWN,
.phy_reset = true,
.reset_gpio_port[0] = 57,
.reset_gpio_port[1] = 61,
.reset_gpio_port[2] = -EINVAL
};
static void __init omap_3430sdp_init(void)
{
omap3430_i2c_init();
......@@ -510,6 +522,7 @@ static void __init omap_3430sdp_init(void)
usb_musb_init();
board_smc91x_init();
enable_board_wakeup_source();
usb_ehci_init(&ehci_pdata);
}
static void __init omap_3430sdp_map_io(void)
......
......@@ -410,6 +410,18 @@ static void __init omap3beagle_flash_init(void)
}
}
static struct ehci_hcd_omap_platform_data ehci_pdata __initconst = {
.port_mode[0] = EHCI_HCD_OMAP_MODE_PHY,
.port_mode[1] = EHCI_HCD_OMAP_MODE_PHY,
.port_mode[2] = EHCI_HCD_OMAP_MODE_UNKNOWN,
.phy_reset = true,
.reset_gpio_port[0] = -EINVAL,
.reset_gpio_port[1] = 147,
.reset_gpio_port[2] = -EINVAL
};
static void __init omap3_beagle_init(void)
{
omap3_beagle_i2c_init();
......@@ -423,6 +435,7 @@ static void __init omap3_beagle_init(void)
gpio_direction_output(170, true);
usb_musb_init();
usb_ehci_init(&ehci_pdata);
omap3beagle_flash_init();
/* Ensure SDRC pins are mux'd for self-refresh */
......
......@@ -307,6 +307,18 @@ static struct platform_device *omap3_evm_devices[] __initdata = {
&omap3evm_smc911x_device,
};
static struct ehci_hcd_omap_platform_data ehci_pdata __initconst = {
.port_mode[0] = EHCI_HCD_OMAP_MODE_UNKNOWN,
.port_mode[1] = EHCI_HCD_OMAP_MODE_PHY,
.port_mode[2] = EHCI_HCD_OMAP_MODE_UNKNOWN,
.phy_reset = true,
.reset_gpio_port[0] = -EINVAL,
.reset_gpio_port[1] = 135,
.reset_gpio_port[2] = -EINVAL
};
static void __init omap3_evm_init(void)
{
omap3_evm_i2c_init();
......@@ -322,6 +334,9 @@ static void __init omap3_evm_init(void)
usb_nop_xceiv_register();
#endif
usb_musb_init();
/* Setup EHCI phy reset padconfig */
omap_cfg_reg(AF4_34XX_GPIO135_OUT);
usb_ehci_init(&ehci_pdata);
ads7846_dev_init();
}
......
......@@ -397,6 +397,18 @@ static struct platform_device *omap3pandora_devices[] __initdata = {
&pandora_keys_gpio,
};
static struct ehci_hcd_omap_platform_data ehci_pdata __initconst = {
.port_mode[0] = EHCI_HCD_OMAP_MODE_PHY,
.port_mode[1] = EHCI_HCD_OMAP_MODE_UNKNOWN,
.port_mode[2] = EHCI_HCD_OMAP_MODE_UNKNOWN,
.phy_reset = true,
.reset_gpio_port[0] = 16,
.reset_gpio_port[1] = -EINVAL,
.reset_gpio_port[2] = -EINVAL
};
static void __init omap3pandora_init(void)
{
omap3pandora_i2c_init();
......@@ -406,6 +418,7 @@ static void __init omap3pandora_init(void)
spi_register_board_info(omap3pandora_spi_board_info,
ARRAY_SIZE(omap3pandora_spi_board_info));
omap3pandora_ads7846_init();
usb_ehci_init(&ehci_pdata);
pandora_keys_gpio_init();
usb_musb_init();
......
......@@ -394,6 +394,18 @@ static struct platform_device *overo_devices[] __initdata = {
&overo_lcd_device,
};
static struct ehci_hcd_omap_platform_data ehci_pdata __initconst = {
.port_mode[0] = EHCI_HCD_OMAP_MODE_UNKNOWN,
.port_mode[1] = EHCI_HCD_OMAP_MODE_PHY,
.port_mode[2] = EHCI_HCD_OMAP_MODE_UNKNOWN,
.phy_reset = true,
.reset_gpio_port[0] = -EINVAL,
.reset_gpio_port[1] = OVERO_GPIO_USBH_NRESET,
.reset_gpio_port[2] = -EINVAL
};
static void __init overo_init(void)
{
overo_i2c_init();
......@@ -401,6 +413,7 @@ static void __init overo_init(void)
omap_serial_init();
overo_flash_init();
usb_musb_init();
usb_ehci_init(&ehci_pdata);
overo_ads7846_init();
overo_init_smsc911x();
......@@ -443,14 +456,6 @@ static void __init overo_init(void)
else
printk(KERN_ERR "could not obtain gpio for "
"OVERO_GPIO_USBH_CPEN\n");
if ((gpio_request(OVERO_GPIO_USBH_NRESET,
"OVERO_GPIO_USBH_NRESET") == 0) &&
(gpio_direction_output(OVERO_GPIO_USBH_NRESET, 1) == 0))
gpio_export(OVERO_GPIO_USBH_NRESET, 0);
else
printk(KERN_ERR "could not obtain gpio for "
"OVERO_GPIO_USBH_NRESET\n");
}
static void __init overo_map_io(void)
......
/*
* linux/arch/arm/mach-omap2/usb-ehci.c
*
* This file will contain the board specific details for the
* Synopsys EHCI host controller on OMAP3430
*
* Copyright (C) 2007 Texas Instruments
* Author: Vikram Pandita <vikram.pandita@ti.com>
*
* Generalization by:
* Felipe Balbi <felipe.balbi@nokia.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/types.h>
#include <linux/errno.h>
#include <linux/delay.h>
#include <linux/platform_device.h>
#include <linux/clk.h>
#include <asm/io.h>
#include <plat/mux.h>
#include <mach/hardware.h>
#include <mach/irqs.h>
#include <plat/usb.h>
#if defined(CONFIG_USB_EHCI_HCD) || defined(CONFIG_USB_EHCI_HCD_MODULE)
static struct resource ehci_resources[] = {
{
.start = OMAP34XX_EHCI_BASE,
.end = OMAP34XX_EHCI_BASE + SZ_1K - 1,
.flags = IORESOURCE_MEM,
},
{
.start = OMAP34XX_UHH_CONFIG_BASE,
.end = OMAP34XX_UHH_CONFIG_BASE + SZ_1K - 1,
.flags = IORESOURCE_MEM,
},
{
.start = OMAP34XX_USBTLL_BASE,
.end = OMAP34XX_USBTLL_BASE + SZ_4K - 1,
.flags = IORESOURCE_MEM,
},
{ /* general IRQ */
.start = INT_34XX_EHCI_IRQ,
.flags = IORESOURCE_IRQ,
}
};
static u64 ehci_dmamask = ~(u32)0;
static struct platform_device ehci_device = {
.name = "ehci-omap",
.id = 0,
.dev = {
.dma_mask = &ehci_dmamask,
.coherent_dma_mask = 0xffffffff,
.platform_data = NULL,
},
.num_resources = ARRAY_SIZE(ehci_resources),
.resource = ehci_resources,
};
/* MUX settings for EHCI pins */
/*
* setup_ehci_io_mux - initialize IO pad mux for USBHOST
*/
static void setup_ehci_io_mux(enum ehci_hcd_omap_mode *port_mode)
{
switch (port_mode[0]) {
case EHCI_HCD_OMAP_MODE_PHY:
omap_cfg_reg(Y9_3430_USB1HS_PHY_STP);
omap_cfg_reg(Y8_3430_USB1HS_PHY_CLK);
omap_cfg_reg(AA14_3430_USB1HS_PHY_DIR);
omap_cfg_reg(AA11_3430_USB1HS_PHY_NXT);
omap_cfg_reg(W13_3430_USB1HS_PHY_DATA0);
omap_cfg_reg(W12_3430_USB1HS_PHY_DATA1);
omap_cfg_reg(W11_3430_USB1HS_PHY_DATA2);
omap_cfg_reg(Y11_3430_USB1HS_PHY_DATA3);
omap_cfg_reg(W9_3430_USB1HS_PHY_DATA4);
omap_cfg_reg(Y12_3430_USB1HS_PHY_DATA5);
omap_cfg_reg(W8_3430_USB1HS_PHY_DATA6);
omap_cfg_reg(Y13_3430_USB1HS_PHY_DATA7);
break;
case EHCI_HCD_OMAP_MODE_TLL:
omap_cfg_reg(Y9_3430_USB1HS_TLL_STP);
omap_cfg_reg(Y8_3430_USB1HS_TLL_CLK);
omap_cfg_reg(AA14_3430_USB1HS_TLL_DIR);
omap_cfg_reg(AA11_3430_USB1HS_TLL_NXT);
omap_cfg_reg(W13_3430_USB1HS_TLL_DATA0);
omap_cfg_reg(W12_3430_USB1HS_TLL_DATA1);
omap_cfg_reg(W11_3430_USB1HS_TLL_DATA2);
omap_cfg_reg(Y11_3430_USB1HS_TLL_DATA3);
omap_cfg_reg(W9_3430_USB1HS_TLL_DATA4);
omap_cfg_reg(Y12_3430_USB1HS_TLL_DATA5);
omap_cfg_reg(W8_3430_USB1HS_TLL_DATA6);
omap_cfg_reg(Y13_3430_USB1HS_TLL_DATA7);
break;
case EHCI_HCD_OMAP_MODE_UNKNOWN:
/* FALLTHROUGH */
default:
break;
}
switch (port_mode[1]) {
case EHCI_HCD_OMAP_MODE_PHY:
omap_cfg_reg(AA10_3430_USB2HS_PHY_STP);
omap_cfg_reg(AA8_3430_USB2HS_PHY_CLK);
omap_cfg_reg(AA9_3430_USB2HS_PHY_DIR);
omap_cfg_reg(AB11_3430_USB2HS_PHY_NXT);
omap_cfg_reg(AB10_3430_USB2HS_PHY_DATA0);
omap_cfg_reg(AB9_3430_USB2HS_PHY_DATA1);
omap_cfg_reg(W3_3430_USB2HS_PHY_DATA2);
omap_cfg_reg(T4_3430_USB2HS_PHY_DATA3);
omap_cfg_reg(T3_3430_USB2HS_PHY_DATA4);
omap_cfg_reg(R3_3430_USB2HS_PHY_DATA5);
omap_cfg_reg(R4_3430_USB2HS_PHY_DATA6);
omap_cfg_reg(T2_3430_USB2HS_PHY_DATA7);
break;
case EHCI_HCD_OMAP_MODE_TLL:
omap_cfg_reg(AA10_3430_USB2HS_TLL_STP);
omap_cfg_reg(AA8_3430_USB2HS_TLL_CLK);
omap_cfg_reg(AA9_3430_USB2HS_TLL_DIR);
omap_cfg_reg(AB11_3430_USB2HS_TLL_NXT);
omap_cfg_reg(AB10_3430_USB2HS_TLL_DATA0);
omap_cfg_reg(AB9_3430_USB2HS_TLL_DATA1);
omap_cfg_reg(W3_3430_USB2HS_TLL_DATA2);
omap_cfg_reg(T4_3430_USB2HS_TLL_DATA3);
omap_cfg_reg(T3_3430_USB2HS_TLL_DATA4);
omap_cfg_reg(R3_3430_USB2HS_TLL_DATA5);
omap_cfg_reg(R4_3430_USB2HS_TLL_DATA6);
omap_cfg_reg(T2_3430_USB2HS_TLL_DATA7);
break;
case EHCI_HCD_OMAP_MODE_UNKNOWN:
/* FALLTHROUGH */
default:
break;
}
switch (port_mode[2]) {
case EHCI_HCD_OMAP_MODE_PHY:
printk(KERN_WARNING "Port3 can't be used in PHY mode\n");
break;
case EHCI_HCD_OMAP_MODE_TLL:
omap_cfg_reg(AB3_3430_USB3HS_TLL_STP);
omap_cfg_reg(AA6_3430_USB3HS_TLL_CLK);
omap_cfg_reg(AA3_3430_USB3HS_TLL_DIR);
omap_cfg_reg(Y3_3430_USB3HS_TLL_NXT);
omap_cfg_reg(AA5_3430_USB3HS_TLL_DATA0);
omap_cfg_reg(Y4_3430_USB3HS_TLL_DATA1);
omap_cfg_reg(Y5_3430_USB3HS_TLL_DATA2);
omap_cfg_reg(W5_3430_USB3HS_TLL_DATA3);
omap_cfg_reg(AB12_3430_USB3HS_TLL_DATA4);
omap_cfg_reg(AB13_3430_USB3HS_TLL_DATA5);
omap_cfg_reg(AA13_3430_USB3HS_TLL_DATA6);
omap_cfg_reg(AA12_3430_USB3HS_TLL_DATA7);
break;
case EHCI_HCD_OMAP_MODE_UNKNOWN:
/* FALLTHROUGH */
default:
break;
}
return;
}
void __init usb_ehci_init(struct ehci_hcd_omap_platform_data *pdata)
{
platform_device_add_data(&ehci_device, pdata, sizeof(*pdata));
/* Setup Pin IO MUX for EHCI */
if (cpu_is_omap34xx())
setup_ehci_io_mux(pdata->port_mode);
if (platform_device_register(&ehci_device) < 0) {
printk(KERN_ERR "Unable to register HS-USB (EHCI) device\n");
return;
}
}
#else
void __init usb_ehci_init(struct ehci_hcd_omap_platform_data *pdata)
{
}
#endif /* CONFIG_USB_EHCI_HCD */
......@@ -74,8 +74,12 @@
#define OMAP34XX_IVA_INTC_BASE 0x40000000
#define OMAP34XX_HSUSB_OTG_BASE (L4_34XX_BASE + 0xAB000)
#define OMAP34XX_HSUSB_HOST_BASE (L4_34XX_BASE + 0x64000)
#define OMAP34XX_USBTLL_BASE (L4_34XX_BASE + 0x62000)
#define OMAP34XX_UHH_CONFIG_BASE (L4_34XX_BASE + 0x64000)
#define OMAP34XX_OHCI_BASE (L4_34XX_BASE + 0x64400)
#define OMAP34XX_EHCI_BASE (L4_34XX_BASE + 0x64800)
#define OMAP34XX_SR1_BASE 0x480C9000
#define OMAP34XX_SR2_BASE 0x480CB000
#define OMAP34XX_MAILBOX_BASE (L4_34XX_BASE + 0x94000)
......
Markdown is supported
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment