Commit 589541c0 authored by Jarkko Nikula's avatar Jarkko Nikula Committed by Tony Lindgren
Browse files

omap: rx51: Add SI4713 FM transmitter



Add SI4713 FM transmitter supplies, platform data and setup to RX-51/N900.
It is connected to line output signals of TLV320AIC34 codec A part.
Driver can be either built-in or a module. It can be tuned with v4l2-ctl
from ivtv-utils. Following examples illustrate the use of it:

	v4l2-ctl -d /dev/radio0 --set-ctrl=mute=0 (power up)
	v4l2-ctl -d /dev/radio0 -f 107900 (tune 107.9 MHz)

	v4l2-ctl -d /dev/radio0 --set-ctrl=mute=1 (power down)
Signed-off-by: default avatarJarkko Nikula <jhnikula@gmail.com>
Signed-off-by: default avatarTony Lindgren <tony@atomide.com>
parent bd061715
...@@ -36,6 +36,8 @@ ...@@ -36,6 +36,8 @@
#include <sound/tlv320aic3x.h> #include <sound/tlv320aic3x.h>
#include <sound/tpa6130a2-plat.h> #include <sound/tpa6130a2-plat.h>
#include <media/radio-si4713.h>
#include <media/si4713.h>
#include <../drivers/staging/iio/light/tsl2563.h> #include <../drivers/staging/iio/light/tsl2563.h>
...@@ -47,6 +49,8 @@ ...@@ -47,6 +49,8 @@
#define RX51_WL1251_POWER_GPIO 87 #define RX51_WL1251_POWER_GPIO 87
#define RX51_WL1251_IRQ_GPIO 42 #define RX51_WL1251_IRQ_GPIO 42
#define RX51_FMTX_RESET_GPIO 163
#define RX51_FMTX_IRQ 53
/* list all spi devices here */ /* list all spi devices here */
enum { enum {
...@@ -357,10 +361,14 @@ static struct regulator_consumer_supply rx51_vio_supplies[] = { ...@@ -357,10 +361,14 @@ static struct regulator_consumer_supply rx51_vio_supplies[] = {
REGULATOR_SUPPLY("DVDD", "2-0018"), REGULATOR_SUPPLY("DVDD", "2-0018"),
REGULATOR_SUPPLY("IOVDD", "2-0019"), REGULATOR_SUPPLY("IOVDD", "2-0019"),
REGULATOR_SUPPLY("DVDD", "2-0019"), REGULATOR_SUPPLY("DVDD", "2-0019"),
/* Si4713 IO supply */
REGULATOR_SUPPLY("vio", "2-0063"),
}; };
static struct regulator_consumer_supply rx51_vaux1_consumers[] = { static struct regulator_consumer_supply rx51_vaux1_consumers[] = {
REGULATOR_SUPPLY("vdds_sdi", "omapdss"), REGULATOR_SUPPLY("vdds_sdi", "omapdss"),
/* Si4713 supply */
REGULATOR_SUPPLY("vdd", "2-0063"),
}; };
static struct regulator_consumer_supply rx51_vdac_supply[] = { static struct regulator_consumer_supply rx51_vdac_supply[] = {
...@@ -511,6 +519,41 @@ static struct regulator_init_data rx51_vio = { ...@@ -511,6 +519,41 @@ static struct regulator_init_data rx51_vio = {
.consumer_supplies = rx51_vio_supplies, .consumer_supplies = rx51_vio_supplies,
}; };
static struct si4713_platform_data rx51_si4713_i2c_data __initdata_or_module = {
.gpio_reset = RX51_FMTX_RESET_GPIO,
};
static struct i2c_board_info rx51_si4713_board_info __initdata_or_module = {
I2C_BOARD_INFO("si4713", SI4713_I2C_ADDR_BUSEN_HIGH),
.platform_data = &rx51_si4713_i2c_data,
};
static struct radio_si4713_platform_data rx51_si4713_data __initdata_or_module = {
.i2c_bus = 2,
.subdev_board_info = &rx51_si4713_board_info,
};
static struct platform_device rx51_si4713_dev __initdata_or_module = {
.name = "radio-si4713",
.id = -1,
.dev = {
.platform_data = &rx51_si4713_data,
},
};
static __init void rx51_init_si4713(void)
{
int err;
err = gpio_request_one(RX51_FMTX_IRQ, GPIOF_DIR_IN, "si4713 irq");
if (err) {
printk(KERN_ERR "Cannot request si4713 irq gpio. %d\n", err);
return;
}
rx51_si4713_board_info.irq = gpio_to_irq(RX51_FMTX_IRQ);
platform_device_register(&rx51_si4713_dev);
}
static int rx51_twlgpio_setup(struct device *dev, unsigned gpio, unsigned n) static int rx51_twlgpio_setup(struct device *dev, unsigned gpio, unsigned n)
{ {
/* FIXME this gpio setup is just a placeholder for now */ /* FIXME this gpio setup is just a placeholder for now */
...@@ -921,6 +964,7 @@ void __init rx51_peripherals_init(void) ...@@ -921,6 +964,7 @@ void __init rx51_peripherals_init(void)
board_smc91x_init(); board_smc91x_init();
rx51_add_gpio_keys(); rx51_add_gpio_keys();
rx51_init_wl1251(); rx51_init_wl1251();
rx51_init_si4713();
spi_register_board_info(rx51_peripherals_spi_board_info, spi_register_board_info(rx51_peripherals_spi_board_info,
ARRAY_SIZE(rx51_peripherals_spi_board_info)); ARRAY_SIZE(rx51_peripherals_spi_board_info));
......
Markdown is supported
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment