Commit 58219896 authored by Jordan Crouse's avatar Jordan Crouse Committed by Linus Torvalds
Browse files

[PATCH] gxfb: Turn on the flatpanel power and data



For Geode devices without a flatpanel aware BIOS, this enables the flatpanel
power and data.
Signed-off-by: default avatarJordan Crouse <jordan.crouse@amd.com>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Acked-by: default avatarJames Simmons <jsimmons@infradead.org>
Signed-off-by: default avatarAndrew Morton <akpm@osdl.org>
Signed-off-by: default avatarLinus Torvalds <torvalds@osdl.org>
parent 53d53bd4
......@@ -220,7 +220,13 @@ gx_configure_tft(struct fb_info *info)
/* Set the dither control */
writel(0x70, par->vid_regs + GX_FP_DFC);
/* Turn on the device */
/* Enable the FP data and power (in case the BIOS didn't) */
fp = readl(par->vid_regs + GX_DCFG);
fp |= GX_DCFG_FP_PWR_EN | GX_DCFG_FP_DATA_EN;
writel(fp, par->vid_regs + GX_DCFG);
/* Unblank the panel */
fp = readl(par->vid_regs + GX_FP_PM);
fp |= GX_FP_PM_P;
......@@ -245,9 +251,12 @@ static void gx_configure_display(struct fb_info *info)
writel(misc, par->vid_regs + GX_MISC);
/* Write the display configuration */
dcfg = readl(par->vid_regs + GX_DCFG);
/* Disable hsync and vsync */
dcfg &= ~(GX_DCFG_VSYNC_EN | GX_DCFG_HSYNC_EN);
writel(dcfg, par->vid_regs + GX_DCFG);
/* Clear bits from existing mode. */
dcfg &= ~(GX_DCFG_CRT_SYNC_SKW_MASK
| GX_DCFG_CRT_HSYNC_POL | GX_DCFG_CRT_VSYNC_POL
......
......@@ -25,6 +25,8 @@ extern struct geode_vid_ops gx_vid_ops;
# define GX_DCFG_HSYNC_EN 0x00000002
# define GX_DCFG_VSYNC_EN 0x00000004
# define GX_DCFG_DAC_BL_EN 0x00000008
# define GX_DCFG_FP_PWR_EN 0x00000040
# define GX_DCFG_FP_DATA_EN 0x00000080
# define GX_DCFG_CRT_HSYNC_POL 0x00000100
# define GX_DCFG_CRT_VSYNC_POL 0x00000200
# define GX_DCFG_CRT_SYNC_SKW_MASK 0x0001C000
......
Markdown is supported
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment