Commit 570ceed4 authored by Hans Ulli Kroll's avatar Hans Ulli Kroll Committed by Olof Johansson

ARM: gemini: Add missing register definitions for gemini timer

Add missing register defintions for the gemini clocksource
Also do some #define' cleanup to make the code more readable.
Signed-off-by: default avatarHans Ulli Kroll <ulli.kroll@googlemail.com>
Reviewed-by: default avatarLinus Walleij <linus.walleij@linaro.org>
Signed-off-by: default avatarOlof Johansson <olof@lixom.net>
parent a54868b4
......@@ -57,9 +57,6 @@
#define GEMINI_USB1_BASE 0x69000000
#define GEMINI_BIG_ENDIAN_BASE 0x80000000
#define GEMINI_TIMER1_BASE GEMINI_TIMER_BASE
#define GEMINI_TIMER2_BASE (GEMINI_TIMER_BASE + 0x10)
#define GEMINI_TIMER3_BASE (GEMINI_TIMER_BASE + 0x20)
/*
* UART Clock when System clk is 150MHz
......
......@@ -19,21 +19,46 @@
/*
* Register definitions for the timers
*/
#define TIMER_COUNT(BASE_ADDR) (BASE_ADDR + 0x00)
#define TIMER_LOAD(BASE_ADDR) (BASE_ADDR + 0x04)
#define TIMER_MATCH1(BASE_ADDR) (BASE_ADDR + 0x08)
#define TIMER_MATCH2(BASE_ADDR) (BASE_ADDR + 0x0C)
#define TIMER_CR(BASE_ADDR) (BASE_ADDR + 0x30)
#define TIMER_1_CR_ENABLE (1 << 0)
#define TIMER_1_CR_CLOCK (1 << 1)
#define TIMER_1_CR_INT (1 << 2)
#define TIMER_2_CR_ENABLE (1 << 3)
#define TIMER_2_CR_CLOCK (1 << 4)
#define TIMER_2_CR_INT (1 << 5)
#define TIMER_3_CR_ENABLE (1 << 6)
#define TIMER_3_CR_CLOCK (1 << 7)
#define TIMER_3_CR_INT (1 << 8)
#define TIMER1_BASE GEMINI_TIMER_BASE
#define TIMER2_BASE (GEMINI_TIMER_BASE + 0x10)
#define TIMER3_BASE (GEMINI_TIMER_BASE + 0x20)
#define TIMER_COUNT(BASE) (IO_ADDRESS(BASE) + 0x00)
#define TIMER_LOAD(BASE) (IO_ADDRESS(BASE) + 0x04)
#define TIMER_MATCH1(BASE) (IO_ADDRESS(BASE) + 0x08)
#define TIMER_MATCH2(BASE) (IO_ADDRESS(BASE) + 0x0C)
#define TIMER_CR (IO_ADDRESS(GEMINI_TIMER_BASE) + 0x30)
#define TIMER_INTR_STATE (IO_ADDRESS(GEMINI_TIMER_BASE) + 0x34)
#define TIMER_INTR_MASK (IO_ADDRESS(GEMINI_TIMER_BASE) + 0x38)
#define TIMER_1_CR_ENABLE (1 << 0)
#define TIMER_1_CR_CLOCK (1 << 1)
#define TIMER_1_CR_INT (1 << 2)
#define TIMER_2_CR_ENABLE (1 << 3)
#define TIMER_2_CR_CLOCK (1 << 4)
#define TIMER_2_CR_INT (1 << 5)
#define TIMER_3_CR_ENABLE (1 << 6)
#define TIMER_3_CR_CLOCK (1 << 7)
#define TIMER_3_CR_INT (1 << 8)
#define TIMER_1_CR_UPDOWN (1 << 9)
#define TIMER_2_CR_UPDOWN (1 << 10)
#define TIMER_3_CR_UPDOWN (1 << 11)
#define TIMER_DEFAULT_FLAGS (TIMER_1_CR_UPDOWN | \
TIMER_3_CR_ENABLE | \
TIMER_3_CR_UPDOWN)
#define TIMER_1_INT_MATCH1 (1 << 0)
#define TIMER_1_INT_MATCH2 (1 << 1)
#define TIMER_1_INT_OVERFLOW (1 << 2)
#define TIMER_2_INT_MATCH1 (1 << 3)
#define TIMER_2_INT_MATCH2 (1 << 4)
#define TIMER_2_INT_OVERFLOW (1 << 5)
#define TIMER_3_INT_MATCH1 (1 << 6)
#define TIMER_3_INT_MATCH2 (1 << 7)
#define TIMER_3_INT_OVERFLOW (1 << 8)
#define TIMER_INT_ALL_MASK 0x1ff
static unsigned int tick_rate;
......@@ -42,19 +67,19 @@ static int gemini_timer_set_next_event(unsigned long cycles,
{
u32 cr;
cr = readl(TIMER_CR(IO_ADDRESS(GEMINI_TIMER_BASE)));
cr = readl(TIMER_CR);
/* This may be overdoing it, feel free to test without this */
cr &= ~TIMER_2_CR_ENABLE;
cr &= ~TIMER_2_CR_INT;
writel(cr, TIMER_CR(IO_ADDRESS(GEMINI_TIMER_BASE)));
writel(cr, TIMER_CR);
/* Set next event */
writel(cycles, TIMER_COUNT(IO_ADDRESS(GEMINI_TIMER2_BASE)));
writel(cycles, TIMER_LOAD(IO_ADDRESS(GEMINI_TIMER2_BASE)));
writel(cycles, TIMER_COUNT(TIMER2_BASE));
writel(cycles, TIMER_LOAD(TIMER2_BASE));
cr |= TIMER_2_CR_ENABLE;
cr |= TIMER_2_CR_INT;
writel(cr, TIMER_CR(IO_ADDRESS(GEMINI_TIMER_BASE)));
writel(cr, TIMER_CR);
return 0;
}
......@@ -67,10 +92,10 @@ static int gemini_timer_shutdown(struct clock_event_device *evt)
* Disable also for oneshot: the set_next() call will arm the timer
* instead.
*/
cr = readl(TIMER_CR(IO_ADDRESS(GEMINI_TIMER_BASE)));
cr = readl(TIMER_CR);
cr &= ~TIMER_2_CR_ENABLE;
cr &= ~TIMER_2_CR_INT;
writel(cr, TIMER_CR(IO_ADDRESS(GEMINI_TIMER_BASE)));
writel(cr, TIMER_CR);
return 0;
}
......@@ -80,12 +105,12 @@ static int gemini_timer_set_periodic(struct clock_event_device *evt)
u32 cr;
/* Start the timer */
writel(period, TIMER_COUNT(IO_ADDRESS(GEMINI_TIMER2_BASE)));
writel(period, TIMER_LOAD(IO_ADDRESS(GEMINI_TIMER2_BASE)));
cr = readl(TIMER_CR(IO_ADDRESS(GEMINI_TIMER_BASE)));
writel(period, TIMER_COUNT(TIMER2_BASE));
writel(period, TIMER_LOAD(TIMER2_BASE));
cr = readl(TIMER_CR);
cr |= TIMER_2_CR_ENABLE;
cr |= TIMER_2_CR_INT;
writel(cr, TIMER_CR(IO_ADDRESS(GEMINI_TIMER_BASE)));
writel(cr, TIMER_CR);
return 0;
}
......@@ -155,10 +180,10 @@ void __init gemini_timer_init(void)
setup_irq(IRQ_TIMER2, &gemini_timer_irq);
/* Enable and use TIMER1 as clock source */
writel(0xffffffff, TIMER_COUNT(IO_ADDRESS(GEMINI_TIMER1_BASE)));
writel(0xffffffff, TIMER_LOAD(IO_ADDRESS(GEMINI_TIMER1_BASE)));
writel(TIMER_1_CR_ENABLE, TIMER_CR(IO_ADDRESS(GEMINI_TIMER_BASE)));
if (clocksource_mmio_init(TIMER_COUNT(IO_ADDRESS(GEMINI_TIMER1_BASE)),
writel(0xffffffff, TIMER_COUNT(TIMER1_BASE));
writel(0xffffffff, TIMER_LOAD(TIMER1_BASE));
writel(TIMER_1_CR_ENABLE, TIMER_CR);
if (clocksource_mmio_init(TIMER_COUNT(TIMER1_BASE),
"TIMER1", tick_rate, 300, 32,
clocksource_mmio_readl_up))
pr_err("timer: failed to initialize gemini clock source\n");
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment