Commit 5057f326 authored by Mauro Carvalho Chehab's avatar Mauro Carvalho Chehab

[media] DocBook: add documentation for tuner-types.h

The tuner-types.h is part of the V4L2 core and should be
touched for every new tuner added. So, it deserves to be
documented at the device-drivers DocBook.

Add it to device-drivers.tmpl and add descriptions for
enum param_type and struct tuner_range.
Signed-off-by: default avatarMauro Carvalho Chehab <>
parent 65fc6409
......@@ -222,6 +222,7 @@ X!Isound/sound_firmware.c
<sect1><title>Video2Linux devices</title>
......@@ -5,6 +5,15 @@
#ifndef __TUNER_TYPES_H__
#define __TUNER_TYPES_H__
* enum param_type - type of the tuner pameters
* @TUNER_PARAM_TYPE_RADIO: Tuner params are for FM and/or AM radio
* @TUNER_PARAM_TYPE_PAL: Tuner params are for PAL color TV standard
* @TUNER_PARAM_TYPE_SECAM: Tuner params are for SECAM color TV standard
* @TUNER_PARAM_TYPE_NTSC: Tuner params are for NTSC color TV standard
* @TUNER_PARAM_TYPE_DIGITAL: Tuner params are for digital TV
enum param_type {
......@@ -13,6 +22,23 @@ enum param_type {
* struct tuner_range - define the frequencies supported by the tuner
* @limit: Max frequency supported by that range, in 62.5 kHz
* (TV) or 62.5 Hz (Radio), as defined by
* @config: Value of the band switch byte (BB) to setup this mode.
* @cb: Value of the CB byte to setup this mode.
* Please notice that digital tuners like xc3028/xc4000/xc5000 don't use
* those ranges, as they're defined inside the driver. This is used by
* analog tuners that are compatible with the "Philips way" to setup the
* tuners. On those devices, the tuner set is done via 4 bytes:
* divider byte1 (DB1), divider byte 2 (DB2), Control byte (CB) and
* band switch byte (BB).
* Some tuners also have an additional optional Auxiliary byte (AB).
struct tuner_range {
unsigned short limit;
unsigned char config;
Markdown is supported
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment