Commit 4e3d0319 authored by Linus Torvalds's avatar Linus Torvalds
Browse files

Merge branch 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6

* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6:
  ACPI: DMI: quirk for FSC ESPRIMO Mobile V5505
  ACPI: DMI blacklist updates
  pnpacpi: __initdata is not an identifier
  ACPI: static acpi_chain_head
  ACPI: static acpi_find_dsdt_initrd()
  ACPI: static acpi_no_initrd_override_setup()
  thinkpad_acpi: static
  ACPI suspend: Execute _WAK with the right argument
  cpuidle: Add Documentation
  ACPI, cpuidle: Clarify C-state description in sysfs
  ACPI: fix suspend regression due to idle update
parents 11d64be6 f60d63f6
......@@ -109,6 +109,8 @@ cpu-hotplug.txt
- document describing CPU hotplug support in the Linux kernel.
cpu-load.txt
- document describing how CPU load statistics are collected.
cpuidle/
- info on CPU_IDLE, CPU idle state management subsystem.
cpusets.txt
- documents the cpusets feature; assign CPUs and Mem to a set of tasks.
cputopology.txt
......
Supporting multiple CPU idle levels in kernel
cpuidle
General Information:
Various CPUs today support multiple idle levels that are differentiated
by varying exit latencies and power consumption during idle.
cpuidle is a generic in-kernel infrastructure that separates
idle policy (governor) from idle mechanism (driver) and provides a
standardized infrastructure to support independent development of
governors and drivers.
cpuidle resides under drivers/cpuidle.
Boot options:
"cpuidle_sysfs_switch"
enables current_governor interface in /sys/devices/system/cpu/cpuidle/,
which can be used to switch governors at run time. This boot option
is meant for developer testing only. In normal usage, kernel picks the
best governor based on governor ratings.
SEE ALSO: sysfs.txt in this directory.
Supporting multiple CPU idle levels in kernel
cpuidle drivers
cpuidle driver hooks into the cpuidle infrastructure and handles the
architecture/platform dependent part of CPU idle states. Driver
provides the platform idle state detection capability and also
has mechanisms in place to support actual entry-exit into CPU idle states.
cpuidle driver initializes the cpuidle_device structure for each CPU device
and registers with cpuidle using cpuidle_register_device.
It can also support the dynamic changes (like battery <-> AC), by using
cpuidle_pause_and_lock, cpuidle_disable_device and cpuidle_enable_device,
cpuidle_resume_and_unlock.
Interfaces:
extern int cpuidle_register_driver(struct cpuidle_driver *drv);
extern void cpuidle_unregister_driver(struct cpuidle_driver *drv);
extern int cpuidle_register_device(struct cpuidle_device *dev);
extern void cpuidle_unregister_device(struct cpuidle_device *dev);
extern void cpuidle_pause_and_lock(void);
extern void cpuidle_resume_and_unlock(void);
extern int cpuidle_enable_device(struct cpuidle_device *dev);
extern void cpuidle_disable_device(struct cpuidle_device *dev);
Supporting multiple CPU idle levels in kernel
cpuidle governors
cpuidle governor is policy routine that decides what idle state to enter at
any given time. cpuidle core uses different callbacks to the governor.
* enable() to enable governor for a particular device
* disable() to disable governor for a particular device
* select() to select an idle state to enter
* reflect() called after returning from the idle state, which can be used
by the governor for some record keeping.
More than one governor can be registered at the same time and
users can switch between drivers using /sysfs interface (when enabled).
More than one governor part is supported for developers to easily experiment
with different governors. By default, most optimal governor based on your
kernel configuration and platform will be selected by cpuidle.
Interfaces:
extern int cpuidle_register_governor(struct cpuidle_governor *gov);
extern void cpuidle_unregister_governor(struct cpuidle_governor *gov);
struct cpuidle_governor
Supporting multiple CPU idle levels in kernel
cpuidle sysfs
System global cpuidle related information and tunables are under
/sys/devices/system/cpu/cpuidle
The current interfaces in this directory has self-explanatory names:
* current_driver
* current_governor_ro
With cpuidle_sysfs_switch boot option (meant for developer testing)
following objects are visible instead.
* current_driver
* available_governors
* current_governor
In this case users can switch the governor at run time by writing
to current_governor.
Per logical CPU specific cpuidle information are under
/sys/devices/system/cpu/cpuX/cpuidle
for each online cpu X
--------------------------------------------------------------------------------
# ls -lR /sys/devices/system/cpu/cpu0/cpuidle/
/sys/devices/system/cpu/cpu0/cpuidle/:
total 0
drwxr-xr-x 2 root root 0 Feb 8 10:42 state0
drwxr-xr-x 2 root root 0 Feb 8 10:42 state1
drwxr-xr-x 2 root root 0 Feb 8 10:42 state2
drwxr-xr-x 2 root root 0 Feb 8 10:42 state3
/sys/devices/system/cpu/cpu0/cpuidle/state0:
total 0
-r--r--r-- 1 root root 4096 Feb 8 10:42 desc
-r--r--r-- 1 root root 4096 Feb 8 10:42 latency
-r--r--r-- 1 root root 4096 Feb 8 10:42 name
-r--r--r-- 1 root root 4096 Feb 8 10:42 power
-r--r--r-- 1 root root 4096 Feb 8 10:42 time
-r--r--r-- 1 root root 4096 Feb 8 10:42 usage
/sys/devices/system/cpu/cpu0/cpuidle/state1:
total 0
-r--r--r-- 1 root root 4096 Feb 8 10:42 desc
-r--r--r-- 1 root root 4096 Feb 8 10:42 latency
-r--r--r-- 1 root root 4096 Feb 8 10:42 name
-r--r--r-- 1 root root 4096 Feb 8 10:42 power
-r--r--r-- 1 root root 4096 Feb 8 10:42 time
-r--r--r-- 1 root root 4096 Feb 8 10:42 usage
/sys/devices/system/cpu/cpu0/cpuidle/state2:
total 0
-r--r--r-- 1 root root 4096 Feb 8 10:42 desc
-r--r--r-- 1 root root 4096 Feb 8 10:42 latency
-r--r--r-- 1 root root 4096 Feb 8 10:42 name
-r--r--r-- 1 root root 4096 Feb 8 10:42 power
-r--r--r-- 1 root root 4096 Feb 8 10:42 time
-r--r--r-- 1 root root 4096 Feb 8 10:42 usage
/sys/devices/system/cpu/cpu0/cpuidle/state3:
total 0
-r--r--r-- 1 root root 4096 Feb 8 10:42 desc
-r--r--r-- 1 root root 4096 Feb 8 10:42 latency
-r--r--r-- 1 root root 4096 Feb 8 10:42 name
-r--r--r-- 1 root root 4096 Feb 8 10:42 power
-r--r--r-- 1 root root 4096 Feb 8 10:42 time
-r--r--r-- 1 root root 4096 Feb 8 10:42 usage
--------------------------------------------------------------------------------
* desc : Small description about the idle state (string)
* latency : Latency to exit out of this idle state (in microseconds)
* name : Name of the idle state (string)
* power : Power consumed while in this idle state (in milliwatts)
* time : Total time spent in this idle state (in microseconds)
* usage : Number of times this state was entered (count)
......@@ -126,6 +126,8 @@ int acpi_processor_ffh_cstate_probe(unsigned int cpu,
printk(KERN_DEBUG "Monitor-Mwait will be used to enter C-%d "
"state\n", cx->type);
}
snprintf(cx->desc, ACPI_CX_DESC_LEN, "ACPI FFH INTEL MWAIT 0x%x",
cx->address);
out:
set_cpus_allowed(current, saved_mask);
......
......@@ -186,6 +186,12 @@ static int __init dmi_unknown_osi_linux(const struct dmi_system_id *d)
acpi_dmi_osi_linux(-1, d); /* unknown */
return 0;
}
static int __init dmi_disable_osi_vista(const struct dmi_system_id *d)
{
printk(KERN_NOTICE PREFIX "DMI detected: %s\n", d->ident);
acpi_osi_setup("!Windows 2006");
return 0;
}
/*
* Most BIOS that invoke OSI(Linux) do nothing with it.
......@@ -228,10 +234,10 @@ static struct dmi_system_id acpi_osi_dmi_table[] __initdata = {
* DMI_MATCH(DMI_PRODUCT_NAME, "TravelMate 5520"),
* DMI_MATCH(DMI_PRODUCT_NAME, "TravelMate 6460"),
* DMI_MATCH(DMI_PRODUCT_NAME, "TravelMate 7510"),
* DMI_MATCH(DMI_PRODUCT_NAME, "Extensa 5220"),
*
* _OSI(Linux) is a NOP:
* DMI_MATCH(DMI_PRODUCT_NAME, "Aspire 5315"),
* DMI_MATCH(DMI_PRODUCT_NAME, "Extensa 5220"),
*/
{
.callback = dmi_disable_osi_linux,
......@@ -327,12 +333,20 @@ static struct dmi_system_id acpi_osi_dmi_table[] __initdata = {
},
{ /* OSI(Linux) effect unknown */
.callback = dmi_unknown_osi_linux,
.ident = "Dell OP GX620",
.ident = "Dell OptiPlex GX620",
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
DMI_MATCH(DMI_PRODUCT_NAME, "OptiPlex GX620"),
},
},
{ /* OSI(Linux) causes some USB initialization to not run */
.callback = dmi_unknown_osi_linux,
.ident = "Dell OptiPlex 755",
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
DMI_MATCH(DMI_PRODUCT_NAME, "OptiPlex 755"),
},
},
{ /* OSI(Linux) effect unknown */
.callback = dmi_unknown_osi_linux,
.ident = "Dell PE 1900",
......@@ -342,6 +356,14 @@ static struct dmi_system_id acpi_osi_dmi_table[] __initdata = {
},
},
{ /* OSI(Linux) is a NOP */
.callback = dmi_unknown_osi_linux,
.ident = "Dell PE 1950",
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
DMI_MATCH(DMI_PRODUCT_NAME, "PowerEdge 1950"),
},
},
{ /* OSI(Linux) is a NOP */
.callback = dmi_disable_osi_linux,
.ident = "Dell PE R200",
.matches = {
......@@ -357,6 +379,22 @@ static struct dmi_system_id acpi_osi_dmi_table[] __initdata = {
DMI_MATCH(DMI_PRODUCT_NAME, "Precision WorkStation 390"),
},
},
{ /* OSI(Linux) touches USB */
.callback = dmi_unknown_osi_linux,
.ident = "Dell PR 390",
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
DMI_MATCH(DMI_PRODUCT_NAME, "Precision WorkStation 690"),
},
},
{ /* OSI(Linux) unknown - ASL looks benign, but may effect dock/SMM */
.callback = dmi_unknown_osi_linux,
.ident = "Dell PR M4300",
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
DMI_MATCH(DMI_PRODUCT_NAME, "Precision M4300"),
},
},
{ /* OSI(Linux) is a NOP */
.callback = dmi_disable_osi_linux,
.ident = "Dell Vostro 1000",
......@@ -390,10 +428,10 @@ static struct dmi_system_id acpi_osi_dmi_table[] __initdata = {
* DMI_MATCH(DMI_PRODUCT_NAME, "AMILO Pi 1536"),
* DMI_MATCH(DMI_PRODUCT_NAME, "AMILO Pi 1556"),
* DMI_MATCH(DMI_PRODUCT_NAME, "AMILO Xi 1546"),
* DMI_MATCH(DMI_PRODUCT_NAME, "ESPRIMO Mobile V5505"),
* _OSI(Linux) unknown effect:
* DMI_MATCH(DMI_PRODUCT_NAME, "Amilo M1425"),
* DMI_MATCH(DMI_PRODUCT_NAME, "Amilo Si 1520"),
* DMI_MATCH(DMI_PRODUCT_NAME, "ESPRIMO Mobile V5505"),
*/
{
.callback = dmi_disable_osi_linux,
......@@ -402,6 +440,14 @@ static struct dmi_system_id acpi_osi_dmi_table[] __initdata = {
DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU SIEMENS"),
},
},
{
.callback = dmi_disable_osi_vista,
.ident = "Fujitsu Siemens",
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU SIEMENS"),
DMI_MATCH(DMI_PRODUCT_NAME, "ESPRIMO Mobile V5505"),
},
},
/*
* Disable OSI(Linux) warnings on all "Hewlett-Packard"
*
......@@ -443,10 +489,11 @@ static struct dmi_system_id acpi_osi_dmi_table[] __initdata = {
* _OSI(Linux) helps sound
* DMI_MATCH(DMI_PRODUCT_VERSION, "ThinkPad R61"),
* DMI_MATCH(DMI_PRODUCT_VERSION, "ThinkPad T61"),
* _OSI(Linux) has Linux specific hooks
* DMI_MATCH(DMI_PRODUCT_VERSION, "ThinkPad X61"),
* _OSI(Linux) is a NOP:
* DMI_MATCH(DMI_PRODUCT_VERSION, "3000 N100"),
* _OSI(Linux) effect unknown
* DMI_MATCH(DMI_PRODUCT_VERSION, "ThinkPad X61"),
* DMI_MATCH(DMI_PRODUCT_VERSION, "LENOVO3000 V100"),
*/
{
.callback = dmi_enable_osi_linux,
......@@ -465,7 +512,7 @@ static struct dmi_system_id acpi_osi_dmi_table[] __initdata = {
},
},
{
.callback = dmi_unknown_osi_linux,
.callback = dmi_enable_osi_linux,
.ident = "Lenovo ThinkPad X61",
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"),
......@@ -473,7 +520,7 @@ static struct dmi_system_id acpi_osi_dmi_table[] __initdata = {
},
},
{
.callback = dmi_unknown_osi_linux,
.callback = dmi_disable_osi_linux,
.ident = "Lenovo 3000 V100",
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"),
......@@ -543,8 +590,9 @@ static struct dmi_system_id acpi_osi_dmi_table[] __initdata = {
* Disable OSI(Linux) warnings on all "Sony Corporation"
*
* _OSI(Linux) is a NOP:
* DMI_MATCH(DMI_PRODUCT_NAME, "VGN-SZ650N"),
* DMI_MATCH(DMI_PRODUCT_NAME, "VGN-NR11S_S"),
* DMI_MATCH(DMI_PRODUCT_NAME, "VGN-SZ38GP_C"),
* DMI_MATCH(DMI_PRODUCT_NAME, "VGN-SZ650N"),
* DMI_MATCH(DMI_PRODUCT_NAME, "VGN-TZ21MN_N"),
* _OSI(Linux) unknown effect:
* DMI_MATCH(DMI_PRODUCT_NAME, "VGN-FZ11M"),
......
......@@ -110,7 +110,7 @@ static const struct file_operations acpi_system_event_ops = {
#endif /* CONFIG_ACPI_PROC_EVENT */
/* ACPI notifier chain */
BLOCKING_NOTIFIER_HEAD(acpi_chain_head);
static BLOCKING_NOTIFIER_HEAD(acpi_chain_head);
int acpi_notifier_call_chain(struct acpi_device *dev, u32 type, u32 data)
{
......
......@@ -616,6 +616,7 @@ acpi_status acpi_leave_sleep_state(u8 sleep_state)
return_ACPI_STATUS(status);
}
arg.integer.value = sleep_state;
status = acpi_evaluate_object(NULL, METHOD_NAME__WAK, &arg_list, NULL);
if (ACPI_FAILURE(status) && status != AE_NOT_FOUND) {
ACPI_EXCEPTION((AE_INFO, status, "During Method _WAK"));
......
......@@ -325,7 +325,7 @@ acpi_os_predefined_override(const struct acpi_predefined_names *init_val,
}
#ifdef CONFIG_ACPI_CUSTOM_DSDT_INITRD
struct acpi_table_header *acpi_find_dsdt_initrd(void)
static struct acpi_table_header *acpi_find_dsdt_initrd(void)
{
struct file *firmware_file;
mm_segment_t oldfs;
......@@ -419,7 +419,7 @@ acpi_os_table_override(struct acpi_table_header * existing_table,
}
#ifdef CONFIG_ACPI_CUSTOM_DSDT_INITRD
int __init acpi_no_initrd_override_setup(char *s)
static int __init acpi_no_initrd_override_setup(char *s)
{
acpi_no_initrd_override = 1;
return 1;
......@@ -1109,7 +1109,7 @@ void __init acpi_dmi_osi_linux(int enable, const struct dmi_system_id *d)
* string starting with '!' disables that string
* otherwise string is added to list, augmenting built-in strings
*/
static int __init acpi_osi_setup(char *str)
int __init acpi_osi_setup(char *str)
{
if (str == NULL || *str == '\0') {
printk(KERN_INFO PREFIX "_OSI method disabled\n");
......
......@@ -945,11 +945,16 @@ static int acpi_processor_get_power_info_cst(struct acpi_processor *pr)
* Otherwise, ignore this info and continue.
*/
cx.entry_method = ACPI_CSTATE_HALT;
snprintf(cx.desc, ACPI_CX_DESC_LEN, "ACPI HLT");
} else {
continue;
}
} else {
snprintf(cx.desc, ACPI_CX_DESC_LEN, "ACPI IOPORT 0x%x",
cx.address);
}
obj = &(element->package.elements[2]);
if (obj->type != ACPI_TYPE_INTEGER)
continue;
......@@ -1420,6 +1425,14 @@ static int acpi_idle_enter_c1(struct cpuidle_device *dev,
return 0;
local_irq_disable();
/* Do not access any ACPI IO ports in suspend path */
if (acpi_idle_suspend) {
acpi_safe_halt();
local_irq_enable();
return 0;
}
if (pr->flags.bm_check)
acpi_idle_update_bm_rld(pr, cx);
......@@ -1643,6 +1656,11 @@ static int acpi_processor_setup_cpuidle(struct acpi_processor *pr)
return -EINVAL;
}
for (i = 0; i < CPUIDLE_STATE_MAX; i++) {
dev->states[i].name[0] = '\0';
dev->states[i].desc[0] = '\0';
}
for (i = 1; i < ACPI_PROCESSOR_MAX_POWER && i <= max_cstate; i++) {
cx = &pr->power.states[i];
state = &dev->states[count];
......@@ -1659,6 +1677,7 @@ static int acpi_processor_setup_cpuidle(struct acpi_processor *pr)
cpuidle_set_statedata(state, cx);
snprintf(state->name, CPUIDLE_NAME_LEN, "C%d", i);
strncpy(state->desc, cx->desc, CPUIDLE_DESC_LEN);
state->exit_latency = cx->latency;
state->target_residency = cx->latency * latency_factor;
state->power_usage = cx->power;
......
......@@ -219,7 +219,8 @@ static void poll_idle_init(struct cpuidle_device *dev)
cpuidle_set_statedata(state, NULL);
snprintf(state->name, CPUIDLE_NAME_LEN, "C0 (poll idle)");
snprintf(state->name, CPUIDLE_NAME_LEN, "C0");
snprintf(state->desc, CPUIDLE_DESC_LEN, "CPUIDLE CORE POLL IDLE");
state->exit_latency = 0;
state->target_residency = 0;
state->power_usage = -1;
......
......@@ -218,16 +218,23 @@ static ssize_t show_state_##_name(struct cpuidle_state *state, char *buf) \
return sprintf(buf, "%u\n", state->_name);\
}
static ssize_t show_state_name(struct cpuidle_state *state, char *buf)
{
return sprintf(buf, "%s\n", state->name);
#define define_show_state_str_function(_name) \
static ssize_t show_state_##_name(struct cpuidle_state *state, char *buf) \
{ \
if (state->_name[0] == '\0')\
return sprintf(buf, "<null>\n");\
return sprintf(buf, "%s\n", state->_name);\
}
define_show_state_function(exit_latency)
define_show_state_function(power_usage)
define_show_state_function(usage)
define_show_state_function(time)
define_show_state_str_function(name)
define_show_state_str_function(desc)
define_one_state_ro(name, show_state_name);
define_one_state_ro(desc, show_state_desc);
define_one_state_ro(latency, show_state_exit_latency);
define_one_state_ro(power, show_state_power_usage);
define_one_state_ro(usage, show_state_usage);
......@@ -235,6 +242,7 @@ define_one_state_ro(time, show_state_time);
static struct attribute *cpuidle_state_default_attrs[] = {
&attr_name.attr,
&attr_desc.attr,
&attr_latency.attr,
&attr_power.attr,
&attr_usage.attr,
......
......@@ -1689,7 +1689,7 @@ static ssize_t hotkey_wakeup_reason_show(struct device *dev,
static struct device_attribute dev_attr_hotkey_wakeup_reason =
__ATTR(wakeup_reason, S_IRUGO, hotkey_wakeup_reason_show, NULL);
void hotkey_wakeup_reason_notify_change(void)
static void hotkey_wakeup_reason_notify_change(void)
{
if (tp_features.hotkey_mask)
sysfs_notify(&tpacpi_pdev->dev.kobj, NULL,
......@@ -1708,7 +1708,7 @@ static struct device_attribute dev_attr_hotkey_wakeup_hotunplug_complete =
__ATTR(wakeup_hotunplug_complete, S_IRUGO,
hotkey_wakeup_hotunplug_complete_show, NULL);
void hotkey_wakeup_hotunplug_complete_notify_change(void)
static void hotkey_wakeup_hotunplug_complete_notify_change(void)
{
if (tp_features.hotkey_mask)
sysfs_notify(&tpacpi_pdev->dev.kobj, NULL,
......
......@@ -36,7 +36,7 @@ static int num = 0;
* have irqs (PIC, Timer) because we call acpi_register_gsi.
* Finally, only devices that have a CRS method need to be in this list.
*/
static struct __initdata acpi_device_id excluded_id_list[] = {
static struct acpi_device_id excluded_id_list[] __initdata = {
{"PNP0C09", 0}, /* EC */
{"PNP0C0F", 0}, /* Link device */
{"PNP0000", 0}, /* PIC */
......
......@@ -32,9 +32,11 @@
#define DOMAIN_COORD_TYPE_SW_ANY 0xfd
#define DOMAIN_COORD_TYPE_HW_ALL 0xfe
#define ACPI_CSTATE_SYSTEMIO (0)
#define ACPI_CSTATE_FFH (1)
#define ACPI_CSTATE_HALT (2)
#define ACPI_CSTATE_SYSTEMIO 0
#define ACPI_CSTATE_FFH 1
#define ACPI_CSTATE_HALT 2
#define ACPI_CX_DESC_LEN 32
/* Power Management */
......@@ -74,6 +76,7 @@ struct acpi_processor_cx {
u64 time;
struct acpi_processor_cx_policy promotion;
struct acpi_processor_cx_policy demotion;
char desc[ACPI_CX_DESC_LEN];
};
struct acpi_processor_power {
......
......@@ -203,6 +203,7 @@ extern bool wmi_has_guid(const char *guid);
extern int acpi_blacklisted(void);
#ifdef CONFIG_DMI
extern void acpi_dmi_osi_linux(int enable, const struct dmi_system_id *d);
extern int acpi_osi_setup(char *str);
#endif
#ifdef CONFIG_ACPI_NUMA
......
......@@ -19,6 +19,7 @@
#define CPUIDLE_STATE_MAX 8
#define CPUIDLE_NAME_LEN 16
#define CPUIDLE_DESC_LEN 32
struct cpuidle_device;
......@@ -29,6 +30,7 @@ struct cpuidle_device;
struct cpuidle_state {
char name[CPUIDLE_NAME_LEN];
char desc[CPUIDLE_DESC_LEN];
void *driver_data;
unsigned int flags;
......
Markdown is supported
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment