Commit 4b9cf1bc authored by David Fries's avatar David Fries Committed by Linus Torvalds
Browse files

W1: ds2490.c ds_dump_status rework



- add result register #defines
- rename ds_dump_status to ds_print_msg
- rename ds_recv_status to ds_dump_status
- ds_dump_status prints the requested status and no longer reads the
  status, this is because the second status read can return different
  data for example the result register
- the result register will be printed, though limited to detecting a
  new device, detecting other values such as a short would require
  additional reporting methods
- ST_EPOF was moved to ds_wait_status to clear the error condition
  sooner
Signed-off-by: default avatarDavid Fries <david@fries.net>
Signed-off-by: default avatarEvgeniy Polyakov <johnpol@2ka.mipt.ru>
Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
parent 6e10f654
......@@ -107,6 +107,17 @@
#define ST_IDLE 0x20 /* DS2490 is currently idle */
#define ST_EPOF 0x80
/* Result Register flags */
#define RR_DETECT 0xA5 /* New device detected */
#define RR_NRS 0x01 /* Reset no presence or ... */
#define RR_SH 0x02 /* short on reset or set path */
#define RR_APP 0x04 /* alarming presence on reset */
#define RR_VPP 0x08 /* 12V expected not seen */
#define RR_CMP 0x10 /* compare error */
#define RR_CRC 0x20 /* CRC error detected */
#define RR_RDP 0x40 /* redirected page */
#define RR_EOS 0x80 /* end of search error */
#define SPEED_NORMAL 0x00
#define SPEED_FLEXIBLE 0x01
#define SPEED_OVERDRIVE 0x02
......@@ -164,7 +175,6 @@ MODULE_DEVICE_TABLE(usb, ds_id_table);
static int ds_probe(struct usb_interface *, const struct usb_device_id *);
static void ds_disconnect(struct usb_interface *);
static inline void ds_dump_status(unsigned char *, unsigned char *, int);
static int ds_send_control(struct ds_device *, u16, u16);
static int ds_send_control_cmd(struct ds_device *, u16, u16);
......@@ -223,11 +233,6 @@ static int ds_send_control(struct ds_device *dev, u16 value, u16 index)
return err;
}
static inline void ds_dump_status(unsigned char *buf, unsigned char *str, int off)
{
printk("%45s: %8x\n", str, buf[off]);
}
static int ds_recv_status_nodump(struct ds_device *dev, struct ds_status *st,
unsigned char *buf, int size)
{
......@@ -248,54 +253,62 @@ static int ds_recv_status_nodump(struct ds_device *dev, struct ds_status *st,
return count;
}
static int ds_recv_status(struct ds_device *dev, struct ds_status *st)
static inline void ds_print_msg(unsigned char *buf, unsigned char *str, int off)
{
unsigned char buf[64];
int count, err = 0, i;
memcpy(st, buf, sizeof(*st));
printk(KERN_INFO "%45s: %8x\n", str, buf[off]);
}
count = ds_recv_status_nodump(dev, st, buf, sizeof(buf));
if (count < 0)
return err;
static void ds_dump_status(struct ds_device *dev, unsigned char *buf, int count)
{
int i;
printk("0x%x: count=%d, status: ", dev->ep[EP_STATUS], count);
printk(KERN_INFO "0x%x: count=%d, status: ", dev->ep[EP_STATUS], count);
for (i=0; i<count; ++i)
printk("%02x ", buf[i]);
printk("\n");
printk(KERN_INFO "\n");
if (count >= 16) {
ds_dump_status(buf, "enable flag", 0);
ds_dump_status(buf, "1-wire speed", 1);
ds_dump_status(buf, "strong pullup duration", 2);
ds_dump_status(buf, "programming pulse duration", 3);
ds_dump_status(buf, "pulldown slew rate control", 4);
ds_dump_status(buf, "write-1 low time", 5);
ds_dump_status(buf, "data sample offset/write-0 recovery time", 6);
ds_dump_status(buf, "reserved (test register)", 7);
ds_dump_status(buf, "device status flags", 8);
ds_dump_status(buf, "communication command byte 1", 9);
ds_dump_status(buf, "communication command byte 2", 10);
ds_dump_status(buf, "communication command buffer status", 11);
ds_dump_status(buf, "1-wire data output buffer status", 12);
ds_dump_status(buf, "1-wire data input buffer status", 13);
ds_dump_status(buf, "reserved", 14);
ds_dump_status(buf, "reserved", 15);
ds_print_msg(buf, "enable flag", 0);
ds_print_msg(buf, "1-wire speed", 1);
ds_print_msg(buf, "strong pullup duration", 2);
ds_print_msg(buf, "programming pulse duration", 3);
ds_print_msg(buf, "pulldown slew rate control", 4);
ds_print_msg(buf, "write-1 low time", 5);
ds_print_msg(buf, "data sample offset/write-0 recovery time",
6);
ds_print_msg(buf, "reserved (test register)", 7);
ds_print_msg(buf, "device status flags", 8);
ds_print_msg(buf, "communication command byte 1", 9);
ds_print_msg(buf, "communication command byte 2", 10);
ds_print_msg(buf, "communication command buffer status", 11);
ds_print_msg(buf, "1-wire data output buffer status", 12);
ds_print_msg(buf, "1-wire data input buffer status", 13);
ds_print_msg(buf, "reserved", 14);
ds_print_msg(buf, "reserved", 15);
}
memcpy(st, buf, sizeof(*st));
if (st->status & ST_EPOF) {
printk(KERN_INFO "Resetting device after ST_EPOF.\n");
err = ds_send_control_cmd(dev, CTL_RESET_DEVICE, 0);
if (err)
return err;
count = ds_recv_status_nodump(dev, st, buf, sizeof(buf));
if (count < 0)
return err;
for (i = 16; i < count; ++i) {
if (buf[i] == RR_DETECT) {
ds_print_msg(buf, "new device detect", i);
continue;
}
ds_print_msg(buf, "Result Register Value: ", i);
if (buf[i] & RR_NRS)
printk(KERN_INFO "NRS: Reset no presence or ...\n");
if (buf[i] & RR_SH)
printk(KERN_INFO "SH: short on reset or set path\n");
if (buf[i] & RR_APP)
printk(KERN_INFO "APP: alarming presence on reset\n");
if (buf[i] & RR_VPP)
printk(KERN_INFO "VPP: 12V expected not seen\n");
if (buf[i] & RR_CMP)
printk(KERN_INFO "CMP: compare error\n");
if (buf[i] & RR_CRC)
printk(KERN_INFO "CRC: CRC error detected\n");
if (buf[i] & RR_RDP)
printk(KERN_INFO "RDP: redirected page\n");
if (buf[i] & RR_EOS)
printk(KERN_INFO "EOS: end of search error\n");
}
return err;
}
static int ds_recv_data(struct ds_device *dev, unsigned char *buf, int size)
......@@ -307,9 +320,14 @@ static int ds_recv_data(struct ds_device *dev, unsigned char *buf, int size)
err = usb_bulk_msg(dev->udev, usb_rcvbulkpipe(dev->udev, dev->ep[EP_DATA_IN]),
buf, size, &count, 1000);
if (err < 0) {
u8 buf[0x20];
int count;
printk(KERN_INFO "Clearing ep0x%x.\n", dev->ep[EP_DATA_IN]);
usb_clear_halt(dev->udev, usb_rcvbulkpipe(dev->udev, dev->ep[EP_DATA_IN]));
ds_recv_status(dev, &st);
count = ds_recv_status_nodump(dev, &st, buf, sizeof(buf));
ds_dump_status(dev, buf, count);
return err;
}
......@@ -390,7 +408,7 @@ int ds_detect(struct ds_device *dev, struct ds_status *st)
if (err)
return err;
err = ds_recv_status(dev, st);
err = ds_dump_status(dev, st);
return err;
}
......@@ -415,11 +433,27 @@ static int ds_wait_status(struct ds_device *dev, struct ds_status *st)
#endif
} while(!(buf[0x08] & 0x20) && !(err < 0) && ++count < 100);
if (err >= 16 && st->status & ST_EPOF) {
printk(KERN_INFO "Resetting device after ST_EPOF.\n");
ds_send_control_cmd(dev, CTL_RESET_DEVICE, 0);
/* Always dump the device status. */
count = 101;
}
/* Dump the status for errors or if there is extended return data.
* The extended status includes new device detection (maybe someone
* can do something with it).
*/
if (err > 16 || count >= 100 || err < 0)
ds_dump_status(dev, buf, err);
if (((err > 16) && (buf[0x10] & 0x01)) || count >= 100 || err < 0) {
ds_recv_status(dev, st);
/* Extended data isn't an error. Well, a short is, but the dump
* would have already told the user that and we can't do anything
* about it in software anyway.
*/
if (count >= 100 || err < 0)
return -1;
} else
else
return 0;
}
......
Markdown is supported
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment